吉林大学学报(工学版)

• • 上一篇    下一篇

城市主干道的多路口模糊协调控制

于德新,杨兆升,陈林   

  1. 吉林大学 交通学院,长春 130022
  • 收稿日期:2005-07-12 修回日期:2005-10-14 出版日期:2006-03-24 发布日期:2006-03-24
  • 通讯作者: 于德新

Fuzzy coordination control of multiintersection for urban trunk road

Yu Dexin, Yang Zhaosheng, Chen Lin   

  1. College of Transportation, Jilin University, Changchun 130022, China
  • Received:2005-07-12 Revised:2005-10-14 Online:2006-03-24 Published:2006-03-24
  • Contact: Yu Dexin

摘要: 首先提出一个简化的交叉路口交通流模型,然后从系统的角度提出了一种区别于传统信号协调控制的新算法。模仿交警指挥时的判断决策过程,设计了一种基于相序优化的模糊控制器。进行交通控制时,采用模糊控制器和相序优化器联合控制。前者用来决定改变当前绿灯相位时刻,后者从相序中根据优先权的大小决定下一个放行相位。仿真研究表明,控制效果良好。

关键词: 交通运输工程, 协调控制, 模糊逻辑, 相序优化器, 智能交通控制, 仿真

Abstract: A simplified traffic flow model for the road intersection was proposed and a fuzzy logic controller based on the phase sequencer was developed. The developed controller was designed based on the simulation of the traffic policemen judging and decisionmaking process during their manual traffic control. A new algorithm was used which is derived from the system concept and differs from the traditional signal coordinated control algorithm. The fuzzy controller and the phase sequencer are combined to perform the traffic control, the former decides the desirability of phase switch, and the latter decides the next green phase based on the priority rating. The computer simulation showed that the developed controller works with good performances.

Key words: transportation engineering, coordinated control, fuzzy logic, phase sequencer, intelligent traffic control, simulation

中图分类号: 

  • U491
[1] 曲大义,杨晶茹,邴其春,王五林,周警春. 基于干线车流排队特性的相位差优化模型[J]. 吉林大学学报(工学版), 2018, 48(6): 1685-1693.
[2] 臧鹏飞, 王哲, 孙晨乐, 林炼炼. 直线增程器稳态运行换气过程[J]. 吉林大学学报(工学版), 2018, 48(5): 1455-1465.
[3] 王扬, 王晓梅, 陈泽仁, 于建群. 基于离散元法的玉米籽粒建模[J]. 吉林大学学报(工学版), 2018, 48(5): 1537-1547.
[4] 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[5] 仇艳凯, 李宝仁, 杨钢, 曹博, 刘真. 新型液压消声器吸收液压系统压力脉动的机理和特性[J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091.
[6] 许秀军, 李震, 王立权, 张同喜. 海流边界下初始铺管作业建模及半物理仿真[J]. 吉林大学学报(工学版), 2018, 48(3): 803-811.
[7] 李因武, 吴庆文, 常志勇, 杨成. 基于仿生斗齿的反铲液压挖掘机动臂仿真优化设计[J]. 吉林大学学报(工学版), 2018, 48(3): 821-827.
[8] 张天时, 宋东鉴, 高青, 王国华, 闫振敏, 宋薇. 电动汽车动力电池液体冷却系统构建及其工作过程仿真[J]. 吉林大学学报(工学版), 2018, 48(2): 387-397.
[9] 徐洪峰, 高霜霜, 郑启明, 章琨. 信号控制交叉口的复合动态车道管理方法[J]. 吉林大学学报(工学版), 2018, 48(2): 430-439.
[10] 刘汉光, 王国强, 孟东阁, 赵寰宇. 液压挖掘机履带行走装置的合理预张紧力[J]. 吉林大学学报(工学版), 2018, 48(2): 486-491.
[11] 王扬, 吕凤妍, 徐天月, 于建群. 大豆籽粒形状和尺寸分析及其建模[J]. 吉林大学学报(工学版), 2018, 48(2): 507-517.
[12] 林正松, 代棋帆, 张璐, 刘璇, 唐超, 冰河. 城市开放社区模式的可视化仿真分析[J]. 吉林大学学报(工学版), 2018, 48(1): 336-343.
[13] 宋现敏, 邓晓磊, 高铭, 曲昭伟. 基于动态反应时间的全速度差模型[J]. 吉林大学学报(工学版), 2017, 47(6): 1703-1709.
[14] 靳立强, 孙志祥, 郑迎. 电动轮汽车复合再生制动系统防抱协调控制[J]. 吉林大学学报(工学版), 2017, 47(5): 1344-1351.
[15] 杨越东, 陈吉清, 兰凤崇, 周云郊. 基于焊点参数识别的白车身动态特性[J]. 吉林大学学报(工学版), 2017, 47(5): 1379-1386.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!