吉林大学学报(工学版)

• • 上一篇    下一篇

碳纤维与混凝土界面粘贴强度的精确测量方法

王树森,程永春,刘寒冰,李春良   

  1. 吉林大学 交通学院 ,长春 130022
  • 收稿日期:2005-09-10 修回日期:2005-11-17 出版日期:2006-03-24 发布日期:2006-03-24
  • 通讯作者: 程永春

Accurate method for measuring bonding strength of interface between carbon fiber and concrete

Wang Shusen, Cheng Yongchun,Liu Hanbing ,Li Chunliang   

  1. College of Transportation,Jilin University,Changchun 130022,China
  • Received:2005-09-10 Revised:2005-11-17 Online:2006-03-24 Published:2006-03-24
  • Contact: Cheng Yongchun

摘要: 针对目前碳纤维与钢筋混凝土界面粘贴强度的测量方法还没有相应的规范,基于静力平衡原理推导出在拉伸状态下,碳纤维的拉应变与钢筋混凝土界面之间剪应力的定量关系,通过应变率确定界面之间的剪应力。在试验方面实现了理论推导公式中基本力学量的测量方法,并得到测量结果;在数据处理方面,采用函数拟合方法得到应变沿试件长度方向变化的函数关系,进而得到剪应力的分布规律和最大剪切应力。应用该方法可以为碳纤维加固钢筋混凝土设计提供可靠的设计参数。

关键词: 工程力学, 碳纤维与混凝土界面, 粘贴强度, 拉伸试验, 桥梁加固

Abstract: Facing the relevant criterion is not established about the accurate measurement of bonding strength between carbon fiber and concrete, on the basis of the principle of the static force equation, the quantitative relationship between the tensile strain in carbon fiber and the shearing strength of the concrete was derived under the tensile status ultimately. The basic mechanical variable in the theoretical formula is measured by experiment. The function relation of strain along the length of the specimen can be gotten through function fitting. Then the distribution rule of shearing strength and shear intensity can also be obtained. The reliable design parameters can be obtained by the presented method for the design of the carbon fiber reinforced concrete beams.

Key words: engineering mechanics, interface between carbon fiber and concrete, bonding strength, tensile test, bridge strengthening

中图分类号: 

  • TU528
[1] 尼颖升,孙启鑫,马晔,徐栋,刘超. 基于空间网格分析的多箱室波形钢腹板组合梁腹板剪力分配[J]. 吉林大学学报(工学版), 2018, 48(6): 1735-1746.
[2] 马晔, 尼颖升, 徐栋, 刁波. 基于空间网格模型分析的体外预应力加固[J]. 吉林大学学报(工学版), 2018, 48(1): 137-147.
[3] 闫亚宾, 王晓媛, 万强. 纳米尺度界面低周疲劳破坏行为[J]. 吉林大学学报(工学版), 2017, 47(4): 1201-1206.
[4] 孟广伟, 冯昕宇, 周立明, 李锋. 基于降维算法的结构可靠性分析[J]. 吉林大学学报(工学版), 2017, 47(1): 174-179.
[5] 陈江义, 刘保元. 纤维断裂损伤对复合材料板中导波频散特性的影响[J]. 吉林大学学报(工学版), 2017, 47(1): 180-184.
[6] 于天来, 刘兴国, 姚爽, 穆罕默德马苏. 碳纤维筋体外预应力加固钢筋混凝土梁的疲劳性能[J]. 吉林大学学报(工学版), 2016, 46(6): 1867-1873.
[7] 杨慧艳, 何晓聪, 周森. 压印接头强度的有限元模型及理论计算方法[J]. 吉林大学学报(工学版), 2015, 45(3): 864-871.
[8] 仉志强, 付建华, 宋建丽, 金坤善, 李永堂. 厚向强度分布对特厚板三辊预弯成形的影响[J]. 吉林大学学报(工学版), 2015, 45(3): 878-883.
[9] 张庆, 王磊. 基于微分方程组的多排桩内力分析[J]. 吉林大学学报(工学版), 2014, 44(5): 1327-1333.
[10] 赵世佳, 徐涛, 陈炜, 谭丽辉. 接近亏损系统模态灵敏度分析的有效算法[J]. 吉林大学学报(工学版), 2013, 43(增刊1): 497-499.
[11] 徐涛, 赵世佳, 张炜, 谭丽辉, 吕岗, 李恒. N重亏损系统摄动的原点移位组合近似方法[J]. 吉林大学学报(工学版), 2012, 42(增刊1): 147-150.
[12] 闫光, 范舟, 李钟海, 程小全, 刘克格, 左春柽. 复合材料加口盖柱壳的设计与分析[J]. , 2012, (06): 1437-1441.
[13] 李春良1,2,王国强1,刘福寿3,赵凯军4. 盾构管片结构的力学行为分析[J]. 吉林大学学报(工学版), 2011, 41(6): 1669-1674.
[14] 张道明1,郭学东2,赵志蒙3. 钢筋混凝土梁弯曲损伤分析的摄动法[J]. 吉林大学学报(工学版), 2011, 41(05): 1358-1363.
[15] 陈耕野, 王彦召, 姚战卫. 平行弦钢桁架应力与感应电动势随荷载的变化[J]. 吉林大学学报(工学版), 2010, 40(增刊): 222-0227.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!