吉林大学学报(工学版)

• • 上一篇    下一篇

VCADRF和VCAAC矿料级配检验方法在SAC13级配设计中的应用

王富玉,沙庆林,张勇,戴文亭   

  1. 吉林大学 交通学院,长春 130022
  • 收稿日期:2006-09-24 修回日期:2006-11-28 出版日期:2007-05-01 发布日期:2007-05-01
  • 通讯作者: 王富玉

Application of aggregate gradation test methods of VCADRF and VCAAC for SAC13

Wang Fu-yu,Sha Qing-lin,Zhang Yong,Dai Wen-ting   

  1. College of Transportation,Jilin University,Changchun 130022,China
  • Received:2006-09-24 Revised:2006-11-28 Online:2007-05-01 Published:2007-05-01
  • Contact: Wang Fu-yu

摘要: 结合将在实际工程中应用的SAC13级配的设计过程对VCADRF和VCAAC矿料级配检验方法进行了具体介绍。其基本原理为:矿料级配中粗集料形成的孔隙率由细集料、填料、沥青和预定孔隙率填充。文中选定的初试级配经VCADRF方法初步检验确定为骨架密实结构,进而用VCAAC方法对压实成型试件进行最终检验,结果发现:该初试级配压实成型试件孔隙率较大,需要根据VCAAC方法进行调整才能满足骨架密实结构要求。文中实例说明该检验方法简便、灵活,且调整后设计级配的高温稳定性、水稳定性、抗滑性能以及抗水渗透性能均很好。

关键词: 道路工程, 矿料级配, 检验方法, VCADRF方法, VCAAC方法

Abstract: The test methods of VCADRF and VCAAC were introduced in the light of the application of gradation design for SAC13 in an actual project.The basic principle is the VCA formed by the coarse aggregate is filled with the fine aggregate,the filling,the asphalt and the preconcerted void content.In the paper the selected tentative gradation was tested with the VCADRF method and the results showed it met the requirement of the close skeletondense structure.Then the VCAAC method was applied to test the compacted specimen.The results indicate that the void content of the compacted specimen of this gradation is too high,having need of adjustment according to the VCAAC method to satisfy the requirement of close skeletondense structure.The demonstrated example proved the convenience and the flexibility of the abovementioned test method,and the adjusted design gradation was characterized by the good hightemperature stability,water resistance,skidresisting capability and water impermeability.

Key words: road engineering, aggregate gradation, test method, method of VCADRF, method of VCAAC

[1] 李伊,刘黎萍,孙立军. 沥青面层不同深度车辙等效温度预估模型[J]. 吉林大学学报(工学版), 2018, 48(6): 1703-1711.
[2] 臧国帅, 孙立军. 基于惰性弯沉点的刚性下卧层深度设置方法[J]. 吉林大学学报(工学版), 2018, 48(4): 1037-1044.
[3] 念腾飞, 李萍, 林梅. 冻融循环下沥青特征官能团含量与流变参数灰熵分析及微观形貌[J]. 吉林大学学报(工学版), 2018, 48(4): 1045-1054.
[4] 宫亚峰, 申杨凡, 谭国金, 韩春鹏, 何钰龙. 不同孔隙率下纤维土无侧限抗压强度[J]. 吉林大学学报(工学版), 2018, 48(3): 712-719.
[5] 程永春, 毕海鹏, 马桂荣, 宫亚峰, 田振宏, 吕泽华, 徐志枢. 纳米TiO2/CaCO3-玄武岩纤维复合改性沥青的路用性能[J]. 吉林大学学报(工学版), 2018, 48(2): 460-465.
[6] 张仰鹏, 魏海斌, 贾江坤, 陈昭. 季冻区组合冷阻层应用表现的数值评价[J]. 吉林大学学报(工学版), 2018, 48(1): 121-126.
[7] 季文玉, 李旺旺, 过民龙, 王珏. 预应力RPC-NC叠合梁挠度试验及计算方法[J]. 吉林大学学报(工学版), 2018, 48(1): 129-136.
[8] 马晔, 尼颖升, 徐栋, 刁波. 基于空间网格模型分析的体外预应力加固[J]. 吉林大学学报(工学版), 2018, 48(1): 137-147.
[9] 罗蓉, 曾哲, 张德润, 冯光乐, 董华均. 基于插板法膜压力模型的沥青混合料水稳定性评价[J]. 吉林大学学报(工学版), 2017, 47(6): 1753-1759.
[10] 尼颖升, 马晔, 徐栋, 李金凯. 波纹钢腹板斜拉桥剪力滞效应空间网格分析方法[J]. 吉林大学学报(工学版), 2017, 47(5): 1453-1464.
[11] 郑传峰, 马壮, 郭学东, 张婷, 吕丹, 秦泳. 矿粉宏细观特征耦合对沥青胶浆低温性能的影响[J]. 吉林大学学报(工学版), 2017, 47(5): 1465-1471.
[12] 于天来, 郑彬双, 李海生, 唐泽睿, 赵云鹏. 钢塑复合筋带挡土墙病害及成因[J]. 吉林大学学报(工学版), 2017, 47(4): 1082-1093.
[13] 蔡氧, 付伟, 陶泽峰, 陈康为. 基于扩展有限元模型的土工布防荷载型反射裂缝影响分析[J]. 吉林大学学报(工学版), 2017, 47(3): 765-770.
[14] 刘寒冰, 张互助, 王静. 失水干燥对路基压实黏质土抗剪强度特性的影响[J]. 吉林大学学报(工学版), 2017, 47(2): 446-451.
[15] 崔亚楠, 韩吉伟, 冯蕾, 李嘉迪, 王乐. 盐冻循环条件下改性沥青微细观结构[J]. 吉林大学学报(工学版), 2017, 47(2): 452-458.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!