吉林大学学报(工学版) ›› 2012, Vol. 42 ›› Issue (增刊1): 216-220.
张驰1, 徐沛娟2, 何东野1, 聂璇1
ZHANG Chi1, XU Pei-juan2, He Dong-ye1, NIE Xuan1
摘要: 阐述了滚花装配式凸轮轴横向滚花连接原理,进行了横向滚花压装、扭转实验,分析了扭转强度的影响因素,并通过数值模拟加以研究。结果表明,过盈量是影响扭转强度的最显著因素。
中图分类号:
[1] 张驰,杨慎华,寇淑清.装配式凸轮轴生产工艺及应用[J].汽车技术,2004(1):32-34. Zhang Chi, Yang Seng-hua. Kou Shu-qing. Production process and application of packaged type camshaft[J]. Automobile Technology, 2004(1):32-34.[2] 杨慎华,张驰,寇淑清,等.装配式凸轮轴制造技术现状与发展趋势[J].内燃机工程,2004, 25(2):32-34. Yang Seng-hua. Zhang Chi, Kou Shu-qing, et al. Present status and trends of assembled camshaft technology[J].Internal Combustion Engine Engineering, 2004, 25(2):32-34.[3] Muller H,et al. Thermal shrink fit process for composite camshafts[J]. Auto Engineering, 1997,105(9):76-78.[4] Yoshikatsu Nakamura, Yasuyoshi Egami, Koichi Shimizu. Development of an assembled camshaft by mechanical bonding[J]. SAE, 1996,960302:109-116.[5] 张驰,何东野,邓春萍,等.滚花连接装配式凸轮轴连接机理及生产新工艺[J].汽车技术,2008(9):53-55. Zhang Chi,He Dong-ye, Deng Chun-ping,et al.The jointing mechanism and new production process of knurling jointing assembled cmshaft[J]. Automobile Technology, 2008(9):53-55.[6] 张驰,杨慎华,徐沛娟,等.滚花装配式凸轮轴压装力实验研究及计算机分析[J].吉林大学学报:工学版,2003(增刊):176-178. Zhang Chi,Yang Shen-hua,Xu Pei-juan,et al.A assembled force experiment research and computer analysis for the shaving joining assembled camshaft[J].Journal of Jilin University,2003(Sup.):176-178.[7] 朱立光,路文刚.GCr15轴承钢高温力学性能的研究[J].特殊钢,2007,28(4):7-9. Zhu Li-guang,Lu Wen-gang.A study on high temperature mechanical properties of GCr15 bearing steel[J].Special Steel,2007,28(4):7-9.[8] Facchinei F, Jiang H, Qi L. A smoothing method for mathematical programs with equilibrium constraints[J]. Mathematical Programming ,1999,85(1):107-134. |
[1] | 姜秋月,杨海峰,檀财旺. 22MnB5超高强钢焊接接头强化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1806-1810. |
[2] | 胡志清, 颜庭旭, 李洪杰, 吕振华, 廖伟, 刘庚. 深冷处理对铝合金薄板冲剪成形性能的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1524-1530. |
[3] | 邱小明, 王银雪, 姚汉伟, 房雪晴, 邢飞. 基于灰色关联的DP1180/DP590异质点焊接头工艺参数优化[J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152. |
[4] | 陈俊甫, 管志平, 杨昌海, 牛晓玲, 姜振涛, 宋玉泉. 金属棒试样拉伸和扭转试验应变范围和力学特性对比[J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160. |
[5] | 梁晓波, 蔡中义, 高鹏飞. 夹芯复合板柱面成形的数值模拟及试验[J]. 吉林大学学报(工学版), 2018, 48(3): 828-834. |
[6] | 刘子武, 李剑峰. 叶片材料FV520B再制造熔覆层冲蚀损伤行为及评价[J]. 吉林大学学报(工学版), 2018, 48(3): 835-844. |
[7] | 刘纯国, 刘伟东, 邓玉山. 多点冲头主动加载路径对薄板拉形的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 221-228. |
[8] | 张志强, 刘从豪, 何东野, 李湘吉, 李纪萱. 基于性能梯度分布的硼钢热冲压工艺对形状精度的影响[J]. 吉林大学学报(工学版), 2017, 47(6): 1829-1833. |
[9] | 吕萌萌, 谷诤巍, 徐虹, 李欣. 超高强度防撞梁热冲压成形工艺优化[J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841. |
[10] | 王辉, 周杰, 熊煜, 陶亚平, 向荣. 基于逆向工程的复杂曲面冲压件回弹补偿[J]. 吉林大学学报(工学版), 2017, 47(6): 1842-1847. |
[11] | 王春生, 邹丽, 杨鑫华. 基于邻域粗糙集的铝合金焊接接头疲劳寿命影响因素分析[J]. 吉林大学学报(工学版), 2017, 47(6): 1848-1853. |
[12] | 邢海燕, 葛桦, 李思岐, 杨文光, 孙晓军. 基于模糊隶属度最大似然估计的焊缝隐性缺陷磁记忆信号识别[J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860. |
[13] | 谷晓燕, 刘亚俊, 孙大千, 徐锋, 孟令山, 高帅. S355钢/6005A铝合金瞬间液相扩散连接接头组织与性能[J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541. |
[14] | 谷诤巍, 张文学, 吕萌萌, 王伟, 徐虹, 李欣. 宽翼边U型截面不锈钢型材拉弯成形缺陷控制[J]. 吉林大学学报(工学版), 2017, 47(4): 1165-1170. |
[15] | 寇淑清, 宋玮峰, 石舟. 36MnVS4连杆裂解加工模拟及缺陷分析[J]. 吉林大学学报(工学版), 2017, 47(3): 861-868. |
|