吉林大学学报(工学版) ›› 2012, Vol. 42 ›› Issue (增刊1): 221-224.
王素芬1,2, 彭艳1,2, 李志杰1,2, 肖力子2
WANG Su-fen1,2, PENG Yan1,2, LI Zhi-jie1,2, XIAO Li-zi2
摘要: 以采用薄板坯连铸连轧工艺生产的低碳钢作为冷轧基板,在实验室二辊可逆轧机上进行不同程度的冷变形,对不同变形后的冷轧板进行室温拉伸试验和显微硬度值测定,分析了其加工硬化情况,并对不同冷变形后试验钢的显微组织进行分析。结果表明:低碳钢经冷变形后,屈服强度和抗拉强度增大,加工硬化显著;试验钢的显微组织为铁素体和少量的珠光体,晶粒随着变形量的增大而拉长细化。
中图分类号:
[1] 武磊,刘雅政,刘兴全,等. 退火工艺对CSP供冷轧原料的SPCC板性能和织构的影响[J]. 材料热处理学报, 2007(S1): 130-133. Wu Lei, Liu Ya-zheng, Liu Xing-quan, et al. Effects of annealing process on the texture and formability of cold rolled SPCC sheet produced by CSP[J]. Transactions of Materials and Heat Treatment, 2007(S1): 130-133.[2] 黄刚,温德智,焦国华,等. 薄板坯连铸连轧30CrMo钢的热轧组织与力学性能[J]. 材料热处理学报,2011(6):109-113. Huang Gang, Wen De-zhi, Jiao Guo-hua, et al. Microstructure and mechanical properties of a hot-rolled 30CrMo steel produced by compact strip production[J]. Transactions of Materials and Heat Treatment, 2011(6):109-113.[3] 霍向东,毛新平,吕盛夏,等. CSP生产Ti微合金化高强钢中纳米碳化物[J]. 北京科技大学学报, 2011(8):941-946. Huo Xiang-dong, Mao Xin-ping, Lü Sheng-xia, et al. Nanocarbides in Ti-microalloyed high strength steel produced by CSP process[J].Journal of University of Science and Technology Brijing, 2011(8):941-946.[4] Deva A, Jha B K, Mishra N S. Influence of boron on strain hardening behaviour and ductility of low carbon hot rolled steel[J]. Materials Science and Engineering: A,2011, 528(24): 7375-7380.[5] Yu H, Kang Y L, Dong H B, et al. Analysis on the behavior of precipitates in ultra-thin hot strip of plain low carbon steel produced by compact strip production[J]. Acta Metallurgica Sinica (English Letters),2002, 15(4): 375-379.[6] González R, García J O, Barbés M A, et al. Ultrafine grained HSLA steels for cold forming[J]. Journal of Iron and Steel Research, 2010, 17(10): 50-56.[7] Shamrai V F, Pimenov A F, Efimov Y V, et al. The effect of cold deformation on the structure, texture and properties of yttrium high temperature superconducting powders and strips[J]. Journal of the Less Common Metals,1991, 175(1): 29-36.[8] M Guil S, Wen W, Ahzi S, et al. Modeling of large plastic deformation behavior and anisotropy evolution in cold rolled bcc steels using the viscoplastic φ-model-based grain-interaction[J]. Materials Science and Engineering: A,2011, 528(18): 5840-5853. |
[1] | 关庆丰,张福涛,彭韬,吕鹏,李姚君,许亮,丁佐军. 含硼、钴9%Cr耐热钢的热变形行为[J]. 吉林大学学报(工学版), 2018, 48(6): 1799-1805. |
[2] | 姜秋月,杨海峰,檀财旺. 22MnB5超高强钢焊接接头强化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1806-1810. |
[3] | 关庆丰, 董书恒, 郑欢欢, 李晨, 张从林, 吕鹏. 强流脉冲电子束作用下45#钢表面Cr合金化[J]. 吉林大学学报(工学版), 2018, 48(4): 1161-1168. |
[4] | 刘子武, 李剑峰. 叶片材料FV520B再制造熔覆层冲蚀损伤行为及评价[J]. 吉林大学学报(工学版), 2018, 48(3): 835-844. |
[5] | 赵宇光, 杨雪慧, 徐晓峰, 张阳阳, 宁玉恒. Al-10Sr变质剂状态、变质温度及变质时间对ZL114A合金组织的影响[J]. 吉林大学学报(工学版), 2018, 48(1): 212-220. |
[6] | 张志强, 刘从豪, 何东野, 李湘吉, 李纪萱. 基于性能梯度分布的硼钢热冲压工艺对形状精度的影响[J]. 吉林大学学报(工学版), 2017, 47(6): 1829-1833. |
[7] | 汤华国, 马贤锋, 赵伟, 刘建伟, 赵振业. 高性能金属铝的制备、微观结构及其热稳定性[J]. 吉林大学学报(工学版), 2017, 47(5): 1542-1547. |
[8] | 关庆丰, 张远望, 孙潇, 张超仁, 吕鹏, 张从林. 强流脉冲电子束作用下铝钨合金的表面合金化[J]. 吉林大学学报(工学版), 2017, 47(4): 1171-1178. |
[9] | 杨晓红, 杭文先, 秦绍刚, 刘勇兵, 刘利萍. H13钢激光熔覆钴基复合涂层的组织及耐磨性[J]. 吉林大学学报(工学版), 2017, 47(3): 891-899. |
[10] | 关庆丰, 黄尉, 李怀福, 龚晓花, 张从林, 吕鹏. 强流脉冲电子束诱发的Cu-C扩散合金化[J]. 吉林大学学报(工学版), 2016, 46(6): 1967-1973. |
[11] | 张学广, 刘纯国, 郑愿, 江仲海, 李湘吉. 基于延性损伤和剪切损伤的铝合金成形极限预测[J]. 吉林大学学报(工学版), 2016, 46(5): 1558-1566. |
[12] | 刘晓波, 周德坤, 赵宇光. 不同等温热处理条件下半固态挤压Mg2Si/Al复合材料的组织和性能[J]. 吉林大学学报(工学版), 2016, 46(5): 1577-1582. |
[13] | 李春玲, 樊丁, 王斌, 余淑荣. 5A06铝合金/镀锌钢预置涂粉对接激光熔钎焊组织与性能[J]. 吉林大学学报(工学版), 2016, 46(2): 516-521. |
[14] | 张家陶, 赵宇光, 谭娟. 初始组织对电脉冲处理逆变奥氏体晶粒细化效果的影响[J]. 吉林大学学报(工学版), 2016, 46(1): 193-198. |
[15] | 张志强, 贾晓飞, 袁秋菊. 基于Yoshida-Uemori模型的TRIP800高强钢回弹分析[J]. 吉林大学学报(工学版), 2015, 45(6): 1852-1856. |
|