吉林大学学报(工学版) ›› 2012, Vol. 42 ›› Issue (增刊1): 100-103.

• 论文 • 上一篇    下一篇

基于DEMATEL方法的数控装备故障相关性分析

王晓燕1,2, 申桂香1, 张英芝1, 郑珊1, 牛序磊1, 梁栋3   

  1. 1. 吉林大学 机械科学与工程学院,长春 130022;
    2. 沈阳航空航天大学 机电工程学院,沈阳 110136;
    3. 吉林大学 汽车工程学院,长春 130022
  • 收稿日期:2012-04-17 出版日期:2012-09-01 发布日期:2012-09-01
  • 通讯作者: 张英芝(1970-),女,副教授,博士.研究方向:数控机床可靠性.E-mail:zyzycx@sohu.com E-mail:zyzycx@sohu.com
  • 作者简介:王晓燕(1975-),女,副教授.研究方向:数控机床可靠性.E-mail:wlfn2005@163.com
  • 基金资助:

    高档数控机床与基础制造装备科技重大专项项目(2010ZX04014-011).

Analysis about failure correlation of CNC equipment base on DEMATEL

WANG Xiao-yan1,2, SHEN Gui-xiang1, ZHANG Ying-zhi1, ZHENG Shan1, NIU Xu-lei1, LIANG Dong3   

  1. 1. College of mechanical Science and Engineering, Jilin University, Changchun 130022, China;
    2. Department of Electronic Engineering, Shenyang Aerospace University, Shenyang 110136, China;
    3. College of Automotive Engineering, Jilin University, Changchun 130022, China
  • Received:2012-04-17 Online:2012-09-01 Published:2012-09-01

摘要: 结合某新型机床现场生产故障数据的FMECA分析结果,利用DEMATEL方法计算出相关故障子系统之间的四项相关度值,分析了相关故障的因果传递方向以及存在的综合影响关系,提出相关部件的故障率计算方法。

关键词: 机床, DEMATEL, 数控装备, 故障相关性, 可靠性分析

Abstract: On the basis of FMECA analyzing result about one type of CNC fault history data from production site, the paper calculated four kinds of correlation degree about correlative fault between subsystems by DEMATEL, analyzed correlation and all relationships of correlative fault and proposed a new method to calculate the dependent components failure rate.

Key words: machine tool, DEMATEL, CNC equipment, failure correlation, reliability analysis

中图分类号: 

  • TG659
[1] Sun Yong, Ma Lin, Mathew J, et al. An analytical model for interactive failures[J]. Reliability Engineering &System Safety, 2006, 91(5):495-504.

[2] Sun Yong, Ma Lin. Estimate of interactive coefficients[J]. CRC for Integrated Engineering Asset Management ,2009 IEEE:310-314.

[3] 王晓峰,申桂香,张英芝,等. 基于改进危害度和DEMATEL方法的abc轴进给系统的故障排序[J].吉林大学学报:工学版,2012,42(1):123-127. Wang Xiao-feng, Shen Gui-xiang, Zhang Ying-zhi, et al. Prioritizing failures of abc-zxis feeding systems based on improved criticality and DEMATEL method[J]. Journal of Jilin University (Engineering and Technology Edition),2012, 42(1):123-127.

[4] Wang Wen-dai. Reliability importance of components in a complex system[C]//Proceedings of Annual Reliability and Maintainability Symposium (RAMS),Los Angeles, USA, 2004.

[5] 王晓峰,申桂香,张英芝. 加工中心可靠性与维修性影响度仿真分析[J]. 吉林大学学报:工学版,2011,41(增刊1):160-163. Wang Xiao-feng, Shen Gui-xiang, Zhang Ying-zhi. Simulation of reliability and maintainability influence of machining center[J].Journal of Jilin University (Engineering and Technology Edition),2011,41(Sup.1):160-163.

[6] 杜雷,高建民,陈琨.基于故障相关性分析的可靠性配置[J]. 计算机集成制造系统,2011,17(9):1973-1980. Du Lei, Gao Jian-min, Chen Kun. Reliability deployment based on fault correlation analysis[J]. Computer Integrated Manufacturing System,2011,17(9):1973-1980.

[7] 周伟,王东锋,刘亚杰. 考虑相关失效的备件优化配置模型[J]. 系统工程与电子技术,2011,33(10):2339-2342. Zhou Wei, Wang Dong-feng, Liu Ya-jie. Allocation optimization model for spare parts concerned with dependent failure[J]. Systems Engineering and Electronics, 2011, 33(10):2339-2342.

[8] 李志刚. 基于DEMATEL的制造业企业动态平衡记分卡的应用研究[D]. 哈尔滨:哈尔滨理工大学,2009. Li Zhi-gang. Application research of the dynamic BSC based on DEMATEL about manufacturing enterprise[D]. Harbin:Harbin University of Science and Technology,2009.

[9] 李远飞. 决策分析和评价算法在线实现[D]. 长春:吉林大学, 2011. Li Yuan-fei. Decision analysis and evaluation algorithm online achieving[D]. Changchun: Jilin University, 2011.

[10] Wu W W, Lee Y T. Developing global managers' competencies using the fuzzy DEMATEL method[J]. Expert Systems with Applications, 2007, 32(2):499-507.
[1] 郑玉彬, 杨斌, 王晓峰, 申桂香, 赵宪卓, 秦猛猛. 基于威布尔分布的电主轴加速寿命试验时间设计[J]. 吉林大学学报(工学版), 2018, 48(3): 767-772.
[2] 申桂香, 曾文彬, 张英芝, 吴茂坤, 郑玉彬. 最小故障率下数控组合机床平均维修时间确定[J]. 吉林大学学报(工学版), 2017, 47(5): 1519-1526.
[3] 曲兴田, 赵永兵, 刘海忠, 王昕, 杨旭, 陈行德. 串并混联机床几何误差建模与实验[J]. 吉林大学学报(工学版), 2017, 47(1): 137-144.
[4] 张英芝, 刘津彤, 申桂香, 戚晓艳, 龙哲. 基于故障相关性分析的数控机床系统可靠性建模[J]. 吉林大学学报(工学版), 2017, 47(1): 169-173.
[5] 孟广伟, 冯昕宇, 周立明, 李锋. 基于降维算法的结构可靠性分析[J]. 吉林大学学报(工学版), 2017, 47(1): 174-179.
[6] 孟书, 申桂香, 张英芝, 龙哲, 曾文彬. 基于时间相关的数控机床系统组件更换时间[J]. 吉林大学学报(工学版), 2016, 46(6): 1946-1952.
[7] 李洪洲, 杨兆军, 许彬彬, 王彦鹍, 贾玉辉, 侯超. 数控机床可靠性评估试验周期设计[J]. 吉林大学学报(工学版), 2016, 46(5): 1520-1527.
[8] 王健健, 冯平法, 张建富, 吴志军, 张国斌, 闫培龙. 卡盘定心精度建模及其保持特性与修复方法[J]. 吉林大学学报(工学版), 2016, 46(2): 487-493.
[9] 杨兆军, 杨川贵, 陈菲, 郝庆波, 郑志同, 王松. 基于PSO算法和SVR模型的加工中心可靠性模型参数估计[J]. 吉林大学学报(工学版), 2015, 45(3): 829-836.
[10] 王晓燕,申桂香,张英芝,孙曙光,戚晓艳,荣峰. 基于故障链的复杂系统故障相关系数建模[J]. 吉林大学学报(工学版), 2015, 45(2): 442-447.
[11] 赵帼娟, 张雷, 卢磊, 韩飞飞, 赵继. 四轴抛光平台综合误差建模及分析[J]. 吉林大学学报(工学版), 2014, 44(6): 1676-1683.
[12] 王继利, 杨兆军, 李国发, 朱晓翠. EM算法的多重威布尔可靠性建模[J]. 吉林大学学报(工学版), 2014, 44(4): 1010-1015.
[13] 杨兆军,王继利,李国发,张新戈. 冲压机床可靠性增长的模糊层次分析预测方法[J]. 吉林大学学报(工学版), 2014, 44(3): 686-691.
[14] 杨兆军, 杨川贵, 陈菲, 王东亮, 马帅, 刘博. 基于最小二乘算法和SVDUKF算法的电液伺服加载优化[J]. 吉林大学学报(工学版), 2014, 44(2): 392-397.
[15] 陈传海, 杨兆军, 陈菲, 郝庆波, 许彬彬, 阚英男. 基于Bootstrap-Bayes的加工中心主轴可靠性建模[J]. 吉林大学学报(工学版), 2014, 44(01): 95-100.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!