吉林大学学报(工学版) ›› 2012, Vol. 42 ›› Issue (增刊1): 41-44.

• 论文 • 上一篇    下一篇

城市客车惯性节能装置

张立浩1, 郭孔辉1, 赵飞翔1, 柯为2   

  1. 1. 吉林大学 汽车仿真与控制国家重点实验室, 长春 130022;
    2. 中国第一汽车集团 技术中心,长春 130011
  • 收稿日期:2011-12-04 出版日期:2012-09-01 发布日期:2012-09-01
  • 作者简介:张立浩(1985-),男,博士研究生.研究方向:车辆工程.E-mail:datou68@163.com
  • 基金资助:

    "863"国家高技术研究发展计划项目(2006AA11A122).

Research on inertial energy saving device of an urban bus

ZHANG Li-hao1, GUO Kong-hui1, ZHAO Fei-xiang1, JING Li-xin2   

  1. 1. State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China;
    2. China FAW Group Corporontion R&P Center, Changchun 130011, China
  • Received:2011-12-04 Online:2012-09-01 Published:2012-09-01

摘要: 介绍了惯性节能装置的工作原理,并针对城市客车开发了城市客车后桥及惯性节能装置。设计了城市客车燃油经济性试验的试验工况,并进行试验。应用AVL Cruise软件,建立了加装惯性节能装置的城市客车的整车模型,并对城市工况进行了燃油经济性仿真分析,仿真结果与试验结果十分吻合。在此基础上对城市客车惯性节能装置的节能潜力进行了分析,节油率可达10.6%,节能潜力巨大。

关键词: 车辆工程, 燃油经济性, 惯性节能, 超越离合器

Abstract: The working principle of inertial energy saving device was researched. The device applied to an urban bus. An test condition of fuel economy in urban road was designed. AVL Cruise was applied in building the urban bus with inertial energy saving device. The simulation of fuel economy in urban road was analysed. The calculation results are in good agreement with the experimental results. On the base, the potential of inertial energy saving device was analysed and the fuel saving ratio reached 10.6%.

Key words: vehicle engineering, fuel economy, inertial energy saving, overrunning clutch

中图分类号: 

  • U462.3
[1] 薛渊,曲秀全,陆念力,等.滚柱式超越离合器的接合能耗[J].吉林大学学报:工学版,2008,38(8):360-364. Xue Yuan , Qu Xiu-quan , Lu Nian-li , Wang Shuchun. Engaging energy consumption of roller overrunning clutch[J]. Journal of Jilin University (Engineering and Technology Edition),2008,38(8):360-364.

[2] Liu Yanwei , Zhao Kegang , Huang Xiangdong, Yang Rongshan. Shift quality and optimal control of an uninterrupted shift transmission based on overrunning mechanism[C]//Applied Mechanics and Materials, 2011,48-49:1038-1043.

[3] 薛渊,陆念力,曲秀全,等.弧块-滚柱式低幅超越离合器扭转刚度和接合能耗的研究[J].哈尔滨工业大学学报,2007,39(3):1736-1739. Xue Yuan , Lu Nian-li , Qu Xiu-quan,et al. Research on arc block-roller type of lower pair overrunning clutch[J]. Journal of Harbin Institute of Technology,2007,39(3):1736-1739.

[4] Zhu Chun-mei , Kong Wei , Xu Xiao-li. Research on high speed sprag overrunning clutch[C]//MACE, 2011: 605-607.

[5] Chen L W , Chen Y C. Wedge-shaped track design and contact analysis of overrunning clutches[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2008, 222(6) : 1647-1656.

[6] GB18352.3-2005. 轻型汽车污染物排放限值及测量方法[S].
[1] 常成,宋传学,张雅歌,邵玉龙,周放. 双馈电机驱动电动汽车变频器容量最小化[J]. 吉林大学学报(工学版), 2018, 48(6): 1629-1635.
[2] 席利贺,张欣,孙传扬,王泽兴,姜涛. 增程式电动汽车自适应能量管理策略[J]. 吉林大学学报(工学版), 2018, 48(6): 1636-1644.
[3] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[4] 那景新,慕文龙,范以撒,谭伟,杨佳宙. 车身钢-铝粘接接头湿热老化性能[J]. 吉林大学学报(工学版), 2018, 48(6): 1653-1660.
[5] 刘玉梅,刘丽,曹晓宁,熊明烨,庄娇娇. 转向架动态模拟试验台避撞模型的构建[J]. 吉林大学学报(工学版), 2018, 48(6): 1661-1668.
[6] 赵伟强, 高恪, 王文彬. 基于电液耦合转向系统的商用车防失稳控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1305-1312.
[7] 宋大凤, 吴西涛, 曾小华, 杨南南, 李文远. 基于理论油耗模型的轻混重卡全生命周期成本分析[J]. 吉林大学学报(工学版), 2018, 48(5): 1313-1323.
[8] 朱剑峰, 张君媛, 陈潇凯, 洪光辉, 宋正超, 曹杰. 基于座椅拉拽安全性能的车身结构改进设计[J]. 吉林大学学报(工学版), 2018, 48(5): 1324-1330.
[9] 那景新, 浦磊鑫, 范以撒, 沈传亮. 湿热环境对Sikaflex-265铝合金粘接接头失效强度的影响[J]. 吉林大学学报(工学版), 2018, 48(5): 1331-1338.
[10] 王炎, 高青, 王国华, 张天时, 苑盟. 混流集成式电池组热管理温均特性增效仿真[J]. 吉林大学学报(工学版), 2018, 48(5): 1339-1348.
[11] 金立生, 谢宪毅, 高琳琳, 郭柏苍. 基于二次规划的分布式电动汽车稳定性控制[J]. 吉林大学学报(工学版), 2018, 48(5): 1349-1359.
[12] 隗海林, 包翠竹, 李洪雪, 李明达. 基于最小二乘支持向量机的怠速时间预测[J]. 吉林大学学报(工学版), 2018, 48(5): 1360-1365.
[13] 王德军, 魏薇郦, 鲍亚新. 考虑侧风干扰的电子稳定控制系统执行器故障诊断[J]. 吉林大学学报(工学版), 2018, 48(5): 1548-1555.
[14] 胡满江, 罗禹贡, 陈龙, 李克强. 基于纵向频响特性的整车质量估计[J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] 刘国政, 史文库, 陈志勇. 考虑安装误差的准双曲面齿轮传动误差有限元分析[J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!