吉林大学学报(地球科学版) ›› 2017, Vol. 47 ›› Issue (1): 197-202.doi: 10.13278/j.cnki.jjuese.201701206
吴冬宇, 殷琨, 甘心, 张鑫鑫, 殷其雷
Wu Dongyu, Yin Kun, Gan Xin, Zhang Xinxin, Yin Qilei
摘要： 对于矿区钻孔作业存在的粉尘污染严重、岩矿心采取困难等问题,常规金刚石钻进取心难以满足现场施工要求。采用贯通式潜孔锤反循环连续取心技术替代常规金刚石取心工艺,在保证了较高钻进效率的同时,可有效解决干旱缺水矿区存在的取心及其引起的污染问题,保障施工人员的身体健康。为此,笔者所在课题组研发了两种新型潜孔锤反循环钻头并进行了野外试验,同时,运用LSDYNA数值模拟对设计的两种反循环钻头进行了强度分析。试验结果表明,两种钻头均具有较好的碎岩钻进效果,但花键内喷孔式反循环钻头易发生断裂；数值模拟分析结果显示,钻头的最大应力远高于材料疲劳极限是造成钻头破坏的根本原因,数值模拟结果与试验结果取得了较好的一致性。由此证实了花键内喷孔式反循环钻头结构存在缺陷,设计时应尽量避免在内喷孔周围设置环槽,以保证钻头体强度。
中图分类号:
| [1] Yin Qilei, Peng Jianming,Bo Kun,et al. Study on Dust Control Performance of a Hammer Drill Bit[J]. International Journal of Mining, Reclamation and Environment, 2013,27(6):393-406. [2] 徐友宁,张江华,柯海玲,等.某金矿区农田土壤镉污染及其环境效应[J].中国地质,2013,40(2):636-643. Xu Youning, Zhang Jianghua, Ke Hailing, et al. Cd Contamination of Farmland Soil in a Gold Mining Area and Its Environmental Effects[J]. Geology in China,2013,40(2):636-643. [3] Niosh. NIOSH Alert:Request for Assistance in Preve-nting Silicosis and Deaths in Rock Drillers[R]. Cincinnati:US Department of Health and Human Services, Public Health Service, CDC, Niosh, 1992. [4] 李良忠,胡国成,张丽娟,等.矿区家庭灰尘中重金属污染及其潜在生态风险[J].中国环境科学,2015(4):1230-1238. Li Liangzhong,Hu Guocheng,Zhang Lijuan, et al. The Pollution and Potential Ecological Risk Assessment of the Heavy Metals in Household Dusts from Mineral Areas[J].China Environmental Science,2015(4):1230-1238. [5] 任伯帜,刘斌全,郑谐,等.锰矿区土-水界面污染流中重金属来源分析[J].环境污染与防治,2014(12):6-10. Ren Bozhi, Liu Binquan, Zheng Xie, et al. Source Analysis of Heavy Metal in Contaminated Flow from Soil-Water Interfaces in Manganese or Zone[J]. Environmental Pollution & Control,2014(12):6-10. [6] Bo K, Wang M S, Zhao Z Q. Numerical Simulation on Bottom Hole Flow Fields of Reverse Circulation Bit[J]. Applied Mechanics and Materials, 2012, 256/257/258/259:2826-2830. [7] 王茂森.全孔反循环潜孔锤参数优化及其钻进工艺研究[D].长春:吉林大学,2007. Wang Maosen. The Parameters Optimization of the Reverse Circulation DTH Hammer and Studies on Its Drilling Technique[D]. Changchun:Jilin University, 2007. [8] Kirk G, Muzondo T, Harney D. Improved Grade Co-ntrol Using Reverse Circulation Drilling at Mogalakwena Platinum Mine, South Africa[C]//Proceedings of 8th International Mining Geology Conference 2011. Parkville:Australasian Institute of Mining and Metallurgy, 2011:329-340. [9] 殷其雷,殷琨,柳鹤,等.潜孔锤反循环钻进技术在某水电站的试验应用[J].吉林大学学报(地球科学版),2014,44(3):961-968. Yin Qilei, Yin Kun, Liu He, et al. Application Test of DTH Hammer Reverse Circulation Drilling Technique in a Hydropower Station[J]. Journal of Jilin University (Earth Science Edition), 2014, 44(3):961-968. [10] 殷琨,王茂森,彭枧明,等.冲击回转钻进[M].北京:地质出版社:2010:44-63. Yin Kun,Wang Maosen, Peng Jianming, et al. Percussion and Rotary Drilling[M]. Beijing:Geological Publishing House,2010:44-63. [11] 刘建林.气体钻井用贯通式潜孔锤关键技术研究[D].长春:吉林大学,2009. Liu Jianlin. Researches on the Key Technologies of Hollow-Through DTH Used in Gas Drilling[D]. Changchun:Jilin University,2009. [12] 张祖培,殷琨,蒋荣庆,等. 岩土钻掘工程新技术[M].北京:地质出版社,2007:20-50. Zhang Zupei, Yin Kun, Jiang Rongqing, et al. The New Technology of Rock and Soil Drilling[M]. Beijing:Geological Publishing House, 2007:20-50. [13] Bu Changgen, Qu Yegao, Cheng Zhiqiang, et al. Nu-merical Simulation of Impact on Pneumatic DTH Hammer Percussive Drilling[J].Journal of Earth Science,2009,20(5):868-878. [14] Liu B, Villavicencio R, Guedes Soares C. Simplified Analytical Method to Evaluate Tanker Side Panels During Minor Collision Incidents[J]. International Journal of Impact Engineering, 2015, 78:20-33. [15] 梁旭.金属材料疲劳强度影响因素的研究[D].沈阳:东北大学,2009. Liang Xu. Research on Influence Factors on Metal Fatige Strength[D]. Shenyang:Northeastern University, 2009. |
| [1] | 甘心, 殷琨, 殷其雷, 李鹏. 空气反循环钻头井底流场分析及结构优化[J]. 吉林大学学报(地球科学版), 2016, 46(1): 187-194. |
| [2] | 殷其雷，殷琨，柳鹤，甘心. 潜孔锤反循环钻进技术在某水电站的试验应用[J]. 吉林大学学报(地球科学版), 2014, 44(3): 961-968. |
|
||