仿生非光滑螺旋钻头的设计及试验

仿生非光滑螺旋钻头的设计及试验

何龙飞，孙友宏，高科，刘宝昌，徐良，王传留

吉林大学建设工程学院，长春 130026

收稿日期:2008-07-03 修回日期:1900-01-01 出版日期:2009-03-26 发布日期:2009-03-26
通讯作者: 孙友宏

Experiments and Design of Bionic Non-smooth Spiral Bit

HE Long-fei, SUN You-hong, GAO Ke, LIU Bao-chang, XU Liang, WANG Chuan-liu

College of Construction Engineering,Jilin University, Changchun 130026, China

Received:2008-07-03 Revised:1900-01-01 Online:2009-03-26 Published:2009-03-26
Contact: SUN You-hong

摘要/Abstract

摘要： 将仿生非光滑理论应用于螺旋钻头设计上，以解决粘性土钻进中螺旋钻头阻力大、粘附严重的难题。加工的仿生非光滑螺旋钻头，经实钻试验表明，与常规螺旋钻头相比，前者脱土率提高了70％，钻机耗油量降低了53.3%，钻进效率提高70%，具有明显的脱附和减阻效果。从而，为大口径螺旋钻施工提供了一种新型钻具。

关键词: 螺旋钻头, 仿生非光滑, 减粘, 降阻, 凸包

Abstract: The bionics theory was applied on the spiral bits, and then a non-smooth spiral bit was designed and processed for carried out the problem of serious sticking. Experiments finally proved that the bionic non-smooth spiral bit has a significant effect in the area of desorption and reducing resistance, compared with the conventional spiral bit, the desorption rate and drilling efficiency have been enhanced 70% and the fuel consumption has been decreased 53.3%. So it is novel tool for drilling of large diameter spiral.

Key words: spiral bit, bionic non-smooth, reduce the adhesion, reduce resistance, convex hull

中图分类号:

P634.4

何龙飞，孙友宏，高科，刘宝昌，徐良，王传留. 仿生非光滑螺旋钻头的设计及试验[J]. J4, 2009, 39(2): 300-0304.

HE Long-fei, SUN You-hong, GAO Ke, LIU Bao-chang, XU Liang, WANG Chuan-liu. Experiments and Design of Bionic Non-smooth Spiral Bit[J]. J4, 2009, 39(2): 300-0304.

参考文献

相关文章 9

[1]	王传留，李建军，孙荣军. 孕镶块式高胎体金刚石钻头的研制[J]. 吉林大学学报(地球科学版), 2014, 44(4): 1276-1281.
[2]	范黎明, 殷琨, 张晓光, 王传留, 赵志强, 赵睿智, 朴金石. 潜孔锤钻进孔口密封器流场数值模拟及优化设计[J]. J4, 2011, 41(2): 511-517.
[3]	张永光, 彭枧明, 柳鹤, 殷其雷, 范黎明. 射流式液动锤活塞回程缓冲机构[J]. J4, 2010, 40(6): 1415-1418.
[4]	王传留, 孙友宏, 高科, 范黎明. 金刚石钻头可再生水口的试验[J]. J4, 2010, 40(3): 694-698.
[5]	刘三意,夏柏如. 多工艺旋挖钻进施工钻具及在冻土层中的应用[J]. J4, 2008, 38(3): 460-0462.
[6]	郑治川，殷琨，王清岩，彭枧明，苏继军. QFGZ型潜孔锤反循环跟管钻头的研制[J]. J4, 2007, 37(5): 1052-1054.
[7]	卢春华，鄢泰宁，Н.Г.叶戈罗夫，蒋国盛，吴翔. 节水型液动冲击器及风动钢球冲击器研究[J]. J4, 2007, 37(4): 837-0840.
[8]	索忠伟，殷琨，徐克里，于平. 射流式液动锤内部动力过程的数学模型及仿真分析[J]. J4, 2007, 37(1): 200-0203.
[9]	V.P.Onischin,陈晨,赵秉成,朱英. 新式整体不提钻切削具可换式钻头[J]. J4, 2006, 36(02): 309-0312.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed