J4

• 地质工程·环境工程 • 上一篇    下一篇

三维电极法预处理山梨酸废水

赵文生1,2,邓锡斌1,赵勇胜1,张凤君1   

  1. 1. 吉林大学 环境与资源学院,长春 130021;2. 吉林化工学院 环境与生物工程学院,吉林省 吉林市 132022
  • 收稿日期:2007-06-21 修回日期:1900-01-01 出版日期:2008-03-26 发布日期:2008-03-26
  • 通讯作者: 赵文生

Pretreatment of Sorbic Acid Wastewater by Method of Three-Dimensional-Electrode

ZHAO Wen-sheng1,2, DENG Xi-bin1, ZHAO Yong-sheng1, ZHANG Feng-jun1   

  1. 1.College of Environment and Resources, Jilin University, Changchun 130026, China;2. College of Environment and Biology Engineering, Jilin Institute of Chemical Technology, Jilin, Jilin Province 132022, China
  • Received:2007-06-21 Revised:1900-01-01 Online:2008-03-26 Published:2008-03-26
  • Contact: ZHAO Wen-sheng

摘要: 用三维电极法对山梨酸废水进行了降解实验,并考察电极材料、反应器电压、电解时间、进水pH值等因素对处理效果的影响。实验结果表明,以不锈钢作阳极,石墨作阴极,柱状活性炭作填料,在槽电压为20 V、主电极极间距为11 cm的条件下,pH值为 4.0±0.2的山梨酸废水在电解20~30 min后,COD去除率达48%以上,而且废水的BOD/COD提高到0.40。

关键词: 三维电极, 活性炭, 山梨酸废水

Abstract: The method of three-dimensional-electrode was used to study the pretreatment of sorbic acid wastewater. The operational parameters that affected the efficiencies of the wastewater treatment were discussed, including electrode material, applied voltage, pH value, electrolysis time, and so on. The experimental results showed that the removal ratio of COD reached to 48% and the BOD/COD increased to 0.40, when the voltage was 20 V, the working electrodes distance was 11 cm, the electrolysis time was 20-30 min, the pH value of wastewater was 4.0±0.2, under the condition of stainless steel as anode, graphite as cathode and cylindrical activated carbon as particle.

Key words: three-dimensional-electrode, activated carbon padding, sorbic acid wastewater

中图分类号: 

  • X703
[1] 张凤君,王顺义,刘 田,沙 娜,王 鹤,周海林. 投加粉末活性炭对MBR运行性能的影响[J]. J4, 2007, 37(2): 350-354.
[2] 邹东雷,袁静敏,赵晓波,原文双,杨忠平. 固定化生物技术在合成染料废水处理中的应用[J]. J4, 2006, 36(04): 613-615.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!