闭塞模锻双动液压模架的研制

吉林大学学报(工学版) ›› 2004, Vol. ›› Issue (4): 544-546.

闭塞模锻双动液压模架的研制

刘化民, 黄良驹, 梁继才

吉林大学辊锻工艺研究所, 吉林长春 130022

收稿日期:2004-01-12 出版日期:2004-10-01
基金资助:
"九五"国家科技攻关资助项目(96-A22-03-02(1))

Development of double-action hydraulic die-sets for flashless-die-forging

LIU Huamin, HUANG Liangju, LIANG Jicai

Roll Forging Institute, Jilin University, Changchun 130022, China

Received:2004-01-12 Online:2004-10-01

摘要/Abstract

摘要： 在综合分析国内外现有闭塞模锻模架的基础上,研制出了双冲头作用式闭塞模锻液压模架。本模架利用上下液压缸完成模具开合工作,压力机上滑块下行时,通过四连杆机构实现上、下凸模以预先调定的速比联动。在8000kN框架式液压机上利用该模架进行了捷达轿车差速器半轴齿轮闭塞冷锻工艺试验。试验证明,该模架设计合理,动作安全可靠,各项性能指标均达到了设计要求。

关键词: 塑性加工工艺与设备, 闭塞冷锻, 双动液压模架, 半轴齿轮

Abstract: Based on the summarization of the die-sets for flashless-die-forging at home and abroad, double-action hydraulic die-sets for the flashless-die-forging were developed.The opening and closing of the mould is performed by an upper and a lower hydraulic cylinders.The movement of the upper and lower punches are controlled by a four-barlinkage.The developed die-sets were tested in an 8000 kN frame type hydraulic press for the cold forging of Jetta car differential half-axle gears. The results show that the design of the die sets is reasonable, its function can be realized safely,and the performance parameters meet the design specifications.

Key words: plastic forming processing and equipment, flashless-die-forging, double-action hydraulic die-sets, half axle gear

中图分类号:

TG376

刘化民, 黄良驹, 梁继才. 闭塞模锻双动液压模架的研制[J]. 吉林大学学报(工学版), 2004, (4): 544-546.

LIU Huamin, HUANG Liangju, LIANG Jicai. Development of double-action hydraulic die-sets for flashless-die-forging[J]. 吉林大学学报(工学版), 2004, (4): 544-546.

参考文献

[1] KOPP R. Some current development trends in metal forging technology［J］. J Mater Proc Tech, 1996,60:1-10.
[2] 朱伟成. 汽车零件精密锻造技术［M］. 北京理工大学出版社,1999.ZHU Weicheng. Precision Forging Technology of Automobile Parts［M］. Beijing Institute of Technology Press,1999.
[3] MEIDERT M, HANSEL M. Net shape cold forging to close tolerances under QS9000 aspects［J］. J Mater Proc Tech, 2000,98:150-154.
[4] 梁继才,付沛福,黄良驹,李义. 闭塞模锻液压模架的研制［J］.吉林工业大学自然科学学报,2001,31(2):17-21.LIANG Jicai,FU Peifu, HUANG Liangju, LI Yi. Research on hydraulic die-sets for flashless-die forging［J］. Natural Science Journal of Jilin University of Technology,2001,31(2):17-21.
[5] 刘国涛. 新型双向挤压模架［J］. 金属成形工艺, 1997,15(2):26-29.LIU Guotao. A novel double-action extrusion die-sets［J］. Metal Forging Process, 1997,15(2):26-29.
[6] 程万军,黄良驹,刘化民.闭塞冷锻星形套的微观分析［J］.吉林大学学报:工学版,2002,32(4):31-35.CHENG Wanjun, HUANG Liangju, LIU Huamin. Microscrpic analysis of the close-die cold forging of star like inner race［J］. Journal of Jilin University(Engineering and Technology Edition),2002,32(4):31-35.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed