油井射流排砂泵扩散管出口流场分析

J4 ›› 2010, Vol. 40 ›› Issue (3): 689-693.

油井射流排砂泵扩散管出口流场分析

邓洪超|刘旭|马文星

吉林大学机械科学与工程学院|长春 130022

收稿日期:2009-07-06 出版日期:2010-05-26 发布日期:2010-05-26
作者简介:邓洪超（1967-）|男|辽宁昌图人|副教授|博士|主要从事特种设备研究及相关领域研究|Tel：0431-85095901|E-mail:denghc@jlu.edu.cn
基金资助:
国家“863”高科技计划资助项目（2007AA05Z256）；辽河石油勘探局基金项目（LHSY-ggc-2008-JS）

Flow Field Analysis for the Diffuser Outlet of Jet Pump Used in the Drain Sand of Petroleum Well

DENG Hong-chao, LIU Xu, MA Wen-xing

College of Mechanical Science and Engineering,Jilin University,Changchun 130022,China

Received:2009-07-06 Online:2010-05-26 Published:2010-05-26

摘要/Abstract

摘要：

依据RNG-ε双方程湍流模型，建立油井射流排砂泵固液两相流方程；在此基础上，应用CFD计算机分析软件，对比分析了扩散管出口突变结构和渐变结构的射流排砂泵的效率、固相比、速度场分布、压力场分布。数值分析结果表明：射流泵扩散管出口采用渐变结构，可以有效减少固液两相流的逆向速度矢量，是提高射流排砂泵综合性能的有效手段。

关键词: 油井, 射流泵, 两相流, 扩散管, CFD

Abstract:

The solid-liquid two-phase flow equations of the draining-sand jet pump have been established according to the RNG k-ε two-equation turbulence model. On this basis, the numerical analysis models of break and gradual changed were established .Then, the characteristics of efficiency and solid phase ratio and velocity field distribution and pressure field distribution were analyzed by the computer software of computational fluid dynamics. The numerical analysis results show that, to reduce the contrary velocity vector of the solid-liquid two-phase flow is the effective technique for improving the comprehensive properties of the draining-sand jet pump by using the gradual changed structure of the diffuser outlet.

Key words: oil wells, jet pumps, two phase flow, diffusers, CFD

中图分类号:

TE934.9

邓洪超, 刘旭, 马文星. 油井射流排砂泵扩散管出口流场分析[J]. J4, 2010, 40(3): 689-693.

DENG Hong-chao, LIU Xu, MA Wen-xing. Flow Field Analysis for the Diffuser Outlet of Jet Pump Used in the Drain Sand of Petroleum Well[J]. J4, 2010, 40(3): 689-693.

参考文献

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

[1]	范黎明, 殷琨, 张晓光, 王传留, 赵志强, 赵睿智, 朴金石. 潜孔锤钻进孔口密封器流场数值模拟及优化设计[J]. J4, 2011, 41(2): 511-517.
[2]	张永光, 彭枧明, 柳鹤, 殷其雷, 范黎明. 射流式液动锤活塞回程缓冲机构[J]. J4, 2010, 40(6): 1415-1418.
[3]	李国琳, 彭枧明, 柳鹤, 赵志强. 液动锤射流元件喷嘴临界流速预测与验证[J]. J4, 2010, 40(1): 159-163.
[4]	刘洪林,李海山. ICA及其在气液两相流辨识中的应用[J]. J4, 2009, 39(1): 31-0036.