基于LED屏的立体图像生成方法

吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (增刊1): 394-397.

基于LED屏的立体图像生成方法

张春彦, 王世刚, 贾丛新, 孙爱朦, 陈贺新

吉林大学通信工程学院,长春 130022

收稿日期:2012-05-05 发布日期:2013-06-01
作者简介:张春彦(1988-),男,硕士研究生.研究方向:图像处理与自由立体显示.E-mail:jluzhangchunyan@163.com
基金资助:
国家自然科学基金重点项目(U0935001);吉林省科技发展计划基础研究项目(20090506);吉林省科技发展计划项目(20100306).

A stereoimage synthesizing method based on LED panel

ZHANG Chun-yan, WANG Shi-gang, JIA Cong-xin, SUN Ai-meng, CHEN He-xin

College of Communication Engineering, Jilin University, Changchun 130022, China

Received:2012-05-05 Published:2013-06-01

摘要/Abstract

摘要：

LED屏自由立体显示系统是将光栅板附在LED显示屏的外表面,根据LED屏的参数生成立体图像文件。其生成方法包括三个步骤,首先根据LED屏和光栅板的特征参数计算出合成立体图像文件所需的像素点映射表;然后采用缝隙删除技术对视点图像进行处理,使其满足像素点映射表的要求;最后,将经处理的视点图像合成立体图像。实验结果表明,提出的方法适用范围广,并能快速高效地合成任意视点数的立体图像,获得较好的立体视觉效果。

关键词: 立体图像, 图像合成, 光栅板, 缝隙删除

Abstract:

Based on the optical characteristic of optical-plate and the structural characteristic of LED panel,a stereoimage synthesizing method based on LED panel had three steps:First,a pixel mapping which was used to synthesize the 3D image was calculated according to the parameters of LED panel and optical-plate.Secondly,multi-view images were processed by seam-carving based on the demand of the derived pixel mapping.At last,the 3D image was synthesized from the processed multi-view images.Experimental results show that the method,which gets better 3D visual,can be applied to any LED autostereoscopic displays,and can synthesize the 3D image of arbitrary viewpoints quickly and efficiently.

Key words: sereo image, image synthesizing, optical-plate, seam-carving

中图分类号:

TN141

张春彦, 王世刚, 贾丛新, 孙爱朦, 陈贺新. 基于LED屏的立体图像生成方法[J]. 吉林大学学报(工学版), 2013, 43(增刊1): 394-397.

ZHANG Chun-yan, WANG Shi-gang, JIA Cong-xin, SUN Ai-meng, CHEN He-xin. A stereoimage synthesizing method based on LED panel[J]. 吉林大学学报(工学版), 2013, 43(增刊1): 394-397.

参考文献

[1] Dodgson N A.Autostereoscopic 3D displays[J].Computer,2005,38(8):31-36.

[2] Hill L,Jacobs A.3-D liquid crystal displays and their applications[J].Proceeding of the IEEE,2006,94(3):575-590.

[3] Yang Lei,Zhou Yuan.A general multiview LCD stereo image composition method based on optical plate technology[C]//3DTV Conference,Potsdam,2009:1-4.

[4] Lee Yun-gu,Ra Jong Beom.Image distortion correction for lenticular misalignment in three-dimensional lenticular displays[J].Optical Engineering SPIE,2006,45(1):17007-17015.

[5] Konrad J,Agniel P.Subsampling models and anti-alias filters for 3-D automultiscopic displays[J].IEEE Transactions on Image Processing,2006,15(1):128-140.

[6] Ralph Braspenning,Eric Brouwer,Gerard De Haan.Visual quality assessment of lenticular based 3D-displays[C]//European Signal Processing Conference,Antalya,2005:1594-1597.

[7] Liou Jian-chiun,Lee Kuan,Huang Juy-Fong.Low crosstalk multi-view tracking 3-D display of synchro-signal LED scanning backlight system[J].Journal of Display Technology,2011,7(8):411-419.

[8] Hirotsugu Yamamoto,Tomoya Kimura,Shinya Matsumoto,et al.Viewing-zone control of light-emitting diode panel for stereoscopic display and multiple viewing distances [J].Journal of Display Technology,2010,6(9):359-366.

[9] Van Berkel C.Image preparation for 3D-LCD [C]//Proceeding of SPIE,San Jose,CA,USA,1999:84-91.

[10] Avidan S,Shamir A.Seam carving for content-aware image resizing[C]//ACM SIGGRAPH 2007,San Diego,2007:1-9.

[11] Vikas Ramachandra,Matthias Zwicker,Truong Q Nguyen.Combined image plus depth seam carving for multiview 3D images[C]//ICASSP2009,Taipei,2009:737-740.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed