Journal of Jilin University(Engineering and Technology Edition) ›› 2022, Vol. 52 ›› Issue (3): 515-524.doi: 10.13229/j.cnki.jdxbgxb20200822

Previous Articles    

Design and trafficability analysis of new bow waist mobile chassis

Jian-jun NIE1(),Xiu-peng YAN1,2,Zong-zheng MA2,Xiao-lin XIE3,Jia-jie GUO3,Ya-lei LYU1   

  1. 1.School of Mechatronics Engineering，Zhongyuan University of Technology，Zhengzhou 451191，China
    2.School of Mechanical Engineering，Henan University of Engineering，Zhengzhou 451191，China
    3.College of Agricultural Equipment Engineering，Henan University of Science and Technology，Luoyang 471000，China
  • Received:2020-10-27 Online:2022-03-01 Published:2022-03-08

RICH HTML

 13   

PDF (PC)

186

Abstract:

Aiming at the narrow hilly farming environment， a new type of bow waist intelligent mobile chassis was designed. The crawler driving device of the intelligent chassis can passively adapt to the terrain change， and can actively adjust the contact angle between the track and the ground to improve the adhesion performance of the track. The mechanism design and transmission principle of the mobile chassis are described in detail. On this basis， the influence factors of soil resistance and adhesion were explored when the track was driving on soft road and the relationship between the attitude change and obstacle crossing height is analyzed. The maximum vertical height of obstacle crossing that the chassis can reach in the bowed posture is 241.53 mm. Through the analysis of longitudinal climbing stability and geometric analysis of the turning process， the maximum climbing degree is 41.23° and the minimum turning radius is 1.297 m. Finally， the reliability of the theoretical analysis is verified through obstacle crossing and maneuverability tests. The results show that the designed chassis improves obstacle crossing performance after changing its attitude， and has good longitudinal slope stability and flexible maneuverability. It can meet the operation requirements in complex farming environment， and has broad application prospects in agriculture， forestry and other fields.

Key words: walking chassis, bending steering, climbing, minimum turning radius

CLC Number: 

  • TP242.3

Table 1

Related parameters of crawler chassis"

序号名称符号参数
1整车质量/kgm≤160
2整车尺寸/mm-1850×650×710
3发动机最大功率/kWpe4.0
4主减速比i39
5最大爬坡度/（°）β35
6最小转弯半径/mmR1500
7最小越障高度/mmH220
8最大转向转角/（°）γ38

Fig.1

Schematic diagram of crawler chassis structure"

Fig.2

Crawler type traction assembly device"

Fig.3

Power transmission schematic diagram of chassis"

Fig.4

Auxiliary lifting device"

Fig.5

Shear deformation of soil at eachpoint of track grounding"

Fig.6

Changing state of crawler traction assemblyduring obstacle crossing"

Fig.7

Structural parameters of the bow waist chassis"

Fig.8

Position of the center of mass of chassisduring obstacle crossing"

Table2

Structural parameters of crawler chassis"

参数数值参数数值参数数值
a0/mm145t0/mm35r0/mm160
a1/mm395t1/mm40r1/mm130
h0/mm125L/mm142r2/mm65
h1/mm145d0/mm815
h2/mm5.5θ1/（°）-60~30

Fig.9

Relationship between centroid coordinatesand angle and mass"

Fig.10

Limit state during obstacle crossing"

Fig.11

Relationship between step heightand chassis attitude"

Fig.12

Mechanical model of climbingprocess of mobile chassis"

Fig.13

Relationship between engine outputtorque and slope angle"

Fig.14

Schematic diagram of steering"

Fig.15

Relationship between steering angle steering fulcrum position and steering radius"

Fig.16

Bow waist crawler chassis"

Table 3

Basic parameters of bow waist chassis"

序号名称参数
1整车质量/kg152
2整车尺寸/mm1850×650×710
3发动机最大功率/kW4.0
4主减速比39
5轮胎半径/mm160
6驱动轮半径/mm130
7轴距/mm815
8最大转角/（°）38

Fig.17

Test of obstacle crossing and steering function"

1 崔思远, 金雪婷, 曹光乔. 我国丘陵山区农机化水平影响因素及区划研究-基于全国丘陵山区238个县(市)的调研数据中国农业资源与区划[J]. 中国农业资源与区划, 2018, 39 (11): 129-134.
Cui Si-yuan, Jin Xue-ting, Cao Guang-qiao. Study on the factors affecting the level of agricultural mechanization and regional division in hilly and mountainous areas of China—based on 238 counties (cites) investigations in hilly and mountainous areas[J]. Chinese Journal of Agricultural Resources and Regional Planning, 2018, 39(11): 129-134.
2 Wang Y J, Yang F Z, Pan G T, et al. Design and testing of a small remote-control hillside tractor[J]. Transactions of the ASABE, 2014, 57(2): 363-370.
3 刘妤, 张拓, 谢铌, 等. 小型农用履带底盘多体动力学建模及验证[J]. 农业工程学报, 2019, 35(7): 39-46.
Liu Yu, Zhang Tuo, Xie Ni, et al. Multi-body dynamic modeling and verification of small agricultural crawler chassis[J]. Transactions of the Chinese Society of Agricultural Engineering, 2019, 35(7): 39-46.
4 李江, 王玉亮, 李瑞川, 等. 丘陵山地四轮驱动拖拉机驱动力主动分配系统研究[J]. 农机化研究, 2019, 41(8):227-235.
Li Jiang, Wang Yu-liang, Li Rui-chuan, et al. Research on driving force allocation system of four wheel drive tractor in hilly area[J]. Journal of Agricultural Mechanization Research, 2019, 41(8):227-235.
5 潘冠廷, 杨福增, 孙景彬, 等. 小型山地履带拖拉机爬坡越障性能分析与试验[J]. 农业机械学报, 2020, 51(9): 374-383.
Pan Guan-ting, Yang Fu-zeng, Sun Jing-bin, et al. Analysis and test of the obstacle negotiation performance of a small hillside crawler tractor during climbing process[J]. Transactions of the Chinese Society for Agricultural Machinery, 2020, 51(9): 374-383.
6 彭贺, 马文星, 王忠山, 等. 丘陵山地拖拉机车身调平控制仿真分析与试验[J]. 吉林大学学报:工学版, 2019, 49(1): 157-165.
Peng He, Ma Wen-xing, Wang Zhong-shan, et al. Control system of self-leveling in hilly tractor body through simulation and experiment[J]. Journal of Jilin University (Engineering and Technology Edition), 2019, 49(1): 157-165.
7 丛茜, 徐金, 马博帅, 等. 基于虚拟仿真的拖拉机后悬挂检测装置设计与实验[J]. 吉林大学学报: 工学版, 2021, 51(2): 754-760.
Cong Qian, Xu Jin, Ma Bo-shuai, et al. Design and test of tractor hydraulic suspension system testing device based on virtual simulation[J]. Journal of Jilin University (Engineering and Technology Edition), 2021, 51(2): 754-760.
8 Gao Q M, Gao F, Tian L, et al. Design and development of a variable ground clearance, variable wheel track self-leveling hillside vehicle power chassis (V2-HVPC)[J]. Journal of Terramechanics, 2014, 56: 77-90.
9 吴永栓, 孙晨阳, 周学剑, 等. 小型履带自走式电动多功能作业平台的设计及试验[J]. 湖南农业大学学报: 自然科学版, 2019, 45(6): 664-668.
Wu Yong-shuan, Sun Chen-yang, Zhou Xue-jian, et al. Design and test of the small size crawler-type self-propelled electric multifunctional operation platform[J]. Journal of Hunan Agricultural University (Natural Science Edition), 2019,45(6): 664-668.
10 谢铌. 小型山地履带底盘坡地行驶性能分析与试验研究[D]. 重庆:重庆理工大学机械工程学院, 2020.
Xie Ni. Analysis and experimental study on the running performance of the small crawler chassis for mountain on slope[D]. Chongqing: Institute of Mechanical Engineering, Chongqing University of Technology, 2020.
11 赵建柱, 王枫辰, 于斌, 等. 农用仿形履带式动力底盘设计与试验[J]. 农业机械学报: 2014, 45(9): 20-24.
Zhao Jian-zhu, Wang Feng-chen, Yu Bin, et al. Research on all terrain profiling crawler power chassis[J]. Transactions of the Chinese Society for Agricultural Machinery, 2014, 45(9): 20-24.
12 刘平义, 王振杰, 李海涛, 等. 行星履带式农用动力底盘设计与越障性能研究[J]. 农业机械学报, 2014, 45():17-23.
Liu Ping-yi, Wang Zhen-jie, Li Hai-tao, et al. Design and overcoming obstacles ability research of tracked driving chassis with planetary structure[J]. Transactions of the Chinese Society for Agricultural Machinery, 2014, 45(Sup.1):17-23.
13 王川伟, 马琨, 杨林, 等. 四摆臂-六履带机器人单侧台阶障碍越障仿真与试验[J]. 农业工程学报, 2018, 34(10): 46-53.
Wang Chuan-wei, Ma Kun, Yang Lin, et al. Simulation and experiment on obstacle surmounting performance of four swing arms and six tracked robot under unilateral step environment[J]. Transactions of the Chinese Society of Agricultural Engineering, 2018, 34(10): 46-53.
14 张明路, 李敏, 田颖, 等. 单履带被动自适应机器人设计与运动学分析[J]. 华中科技大学学报: 自然科学版, 2018, 46(3): 69-74.
Zhang Ming-lu, Li Min, Tian Ying, et al. Design and kinematics analysis of single crawler wheel-track compound passive adaptive mobile robot[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2018, 46(3): 69-74.
15 齐文超, 李彦明, 陶建峰, 等. 丘陵山地拖拉机姿态主动调整系统设计与实验[J]. 农业机械学报, 2019, 50(7): 381-388.
Qi Wen-chao, Li Yan-ming, Tao Jian-feng, et al. Design and experiment of active attitude adjustment system for hilly area tractors[J]. Transactions of the Chinese Society for Agricultural Machinery, 2019, 50(7): 381-388.
16 彭贺, 马文星, 赵恩鹏, 等. 丘陵山地轮式拖拉机车身调平系统设计与物理模型试验[J]. 农业工程学报, 2018, 34(14): 36-44.
Peng He, Ma Wen-xing, Zhao En-peng, et al. Design and physical model experiment of body leveling system for roller tractor in hilly and mountainous region[J]. Transactions of the Chinese Society of Agricultural Engineering, 2018, 34(14): 36-44.
17 金诚谦, 杨腾祥, 刘岗微, 等. 履带式联合收获机全向调平底盘设计与试验[J]. 农业机械学报, 2020, 51(11): 393-402.
Jin Cheng-qian, Yang Teng-xiang, Liu Gang-wei, et al. Design and test of posture controlled chassis for caterpillar combine[J]. Transactions of the Chinese Society for Agricultural Machinery, 2020, 51(11): 393-402.
18 魏楷峰. 基于DEM-MBD双向耦合的履带车辆松软地面转向阻力研究[D]. 长春: 吉林大学生物与农业工程学院, 2020.
Wei Kai-feng. Research on steering resistance of tracked vehicle on soft ground based on DEM-MBD simulation[D]. Changchun: College of Biological and Agricultural Engineering, Jilin University, 2020.
19 余志生.汽车理论 [M].6版. 北京:机械工业出版社, 2019.
20 李雨潭, 朱华, 高志军, 等. 履带机器人通用地面力学模型分析与底盘设计[J]. 哈尔滨工程大学学报, 2015, 36(8): 1126-1130.
Li Yu-tan, Zhu Hua, Gao Zhi-jun, et al. A universal terramechanics model and the chassis design of a tracked robot[J]. Journal of Harbin Engineering University, 2015, 36(8): 1126-1130.
21 Gao F, Zeng W, Jiang H, et al. Design and terrainability analysis of a novel mobile robot with variable-diameter wheels[C]∥Proceedings of International Conference on Energy, Power and Mechanical Engineering, Guangzhou, China, 2019: 135-143.
[1] ZHAO Wei, SUN Han-xu, JIA Qing-xuan, ZHANG Yan-heng, YU Tao. Mechanical analysis and optimal design of a new spherical mobile robot with two moving modes [J]. 吉林大学学报(工学版), 2013, 43(05): 1386-1394.
[2] WEI Wei, LIU Xin-hui, WANG Tong-jian, DONG Han, ZHAO Feng. Minimum driving torque of climbing obstacle with wheeled vehicle of oscillating body and its influential factors [J]. 吉林大学学报(工学版), 2013, 43(05): 1190-1195.
[3] WEI Wei, LIU Xin-hui, YAO Liang, ZHAO Feng. Obstacle-climbing model of wheeled vehicle with oscillating body and minimum driving torque [J]. 吉林大学学报(工学版), 2012, 42(02): 285-291.
[4] WU Shan-qiang, LI Man-tian, SUN Li-nin . Centrifugal fan for wireless wallclimbing reconnaissance robot [J]. 吉林大学学报(工学版), 2008, 38(06): 1418-1423.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd