J4

• • 上一篇    下一篇

BaFe12O19纳米复合材料微波吸收性能的研究

阮圣平1,2, 王 兢3, 刘永刚2, 马 骥2< /sup>, 宣 丽2   

  1. 1. 吉林大学电子科学与工程学院, 长春 130023; 2. 中国科学院长春光学精密机械与物理研究所, 长春 130022;3. 大连理工大学电子工程系, 大连 116023
  • 收稿日期:2002-07-04 修回日期:1900-01-01 出版日期:2003-01-26 发布日期:2003-01-26
  • 通讯作者: 阮圣平

Microwave Absorbing Properties of Nanocrystalline BaFe12O19 Composite Material

RUAN Sheng-ping1,2, WANG Jing3, LIU Yong-gang2, MA Ji2, XUAN Li2   

  1. 1. Institute of Electronic Sciences Engineering, Jilin University, Changchun 130023, China;2. Changchun Institute of Optics, Fine Mechanics Physics, Chinese Academy of Sciences, Changchun 130022, China;3. Department of Electronic Engineering, Dalian University of Technology, Dalian 116023, China
  • Received:2002-07-04 Revised:1900-01-01 Online:2003-01-26 Published:2003-01-26
  • Contact: RUAN Sheng-ping

摘要: 采用柠檬酸盐法合成BaFe12O19复合氧化 物纳米材料, 用X射线衍射分析、 红外光谱分析等手段对产物进行表征. 将合成材料及传统的微波吸收剂铁粉分别均匀地分散于有机高分子粘合剂中, 涂在铁板上, 制成双层复合的吸波涂层. 测试结果表明, 在涂层仅为1 mm厚的条件下, 取得了良好的吸波效果. 并对纳米复合材料的微波吸收机理进行了探讨.

关键词: 微波吸收, 复合材料, 钡铁氧体, 纳米晶

Abstract: Nanocrystalline composite oxide BaFe12O19 was synthesized via a citrate method. The composite was characterized by means of X-ray powder diffraction and infrared spectral analysis. Nanocrystalline composite oxide BaFe12O19 and the traditional micro wave absorbing mat erial, iron powder were dispersed into the macromolecule polymer uniformly and respectively. Microwave-absorbing coatings with a two-layer structure were obt ained by smearing the mixture of the composite dispersed in the macromolecule polymer, and the mixture of the iron powder dispersed in the macromolecule polymer alternatively on the iron plate until the total thickness being only 1 mm, in this case, a big reflection loss over broadband is realizable. The possible microwave absorptive mechanisms of nanocrystalline material are also discussed on the basis of the experiments.

Key words: microwave absorption, composite material, barium ferrite, nanocrystal

中图分类号: 

  • O647