J4

• 化学 • 上一篇    下一篇

不同方法制备的钒基催化剂对异丁烷脱氢性质的影响

马红超1, 付颖寰1, 王振旅2, 朱万春2, 吉定豪2, 王国甲2   

  1. 1. 大连工业大学 化工与材料学院, 辽宁省 大连 116034; 2. 吉林大学 化学学院, 长春 130021
  • 收稿日期:2006-11-29 修回日期:1900-01-01 出版日期:2007-09-26 发布日期:2007-09-26
  • 通讯作者: 马红超

Activities of Vanadiabased Catalysts Prepared with Different Methods for Dehydrogenation of Isobutane to Isobutene

MA Hongchao1, FU Yinghuan1, WANG Zhenlü2, ZHU Wan chun2, JI Dinghao2, WANG Guojia2   

  1. 1. School of Chemical and Material, Dalian Polytechnic University, Dalian 116034, Liaoning Province, China;2. College of Chemistry, Jilin University, Changchun 130021, China
  • Received:2006-11-29 Revised:1900-01-01 Online:2007-09-26 Published:2007-09-26
  • Contact: MA Hongchao

摘要: 通过浸渍、 共沉淀、 浓缩结晶、 水热和水热流体干燥法制备V-Al-O催化剂, 采用XRD,TPR,TPD和ESR等技术对催化剂的表面性质和结构进行表征. 结果表明, 制备方法影响催化剂表面钒物种的分散、 还原能力、 表面酸性和结构状态; 表面钒物种的分散度和活性位数量是影响异丁烷脱氢活性的主要因素; 催化剂表面Lewis酸量是影响异丁烯选择性的主要因素.

关键词: V-Al-O催化剂, 制备方法, 异丁烷, 脱氢

Abstract: The V-Al-O catalysts prepared via impregnating, co-precipitation, hydrothermal, concentration, and hydrothermal fluid drying, were characterized via XRD, TPR, TPD and ESR, etc. At the same time, they were compared with V2O5/γ-Al2O3 catalyst prepared via impregnation in the structure and dehydrogenation activities for dehydrogenation of isobutane to isobutene. It was found that the activities of the catalysts were obviously dependent on the preparation methods. The catalyst with large surface, surface enriched and well dispersedvanadia showed a higher dehydrogenation activity. Furthermore, the amount of Lewis acid on the surface of the catalyst was also an important factor to affect the selectivity of catalyst for isobutene.

Key words: V-Al-O catalyst, preparation method, isobutane, deh ydrogenation

中图分类号: 

  • O643.3