J4
• 化学 • Previous Articles Next Articles
WANG De, HE Qiang, PEI Li, HE Tian-min
Received:
Revised:
Online:
Published:
Contact:
Abstract: Nanometer yttria stabilized zirconia (YSZ) powders were prepared by means of glycine-nitrate process (GNP). The phases of the synthesized product and the calcined powders were analyzed by X-ray diffraction, and the average crystallite size of the YSZ powders was calculated. The sintering shrinkage of the synthesized powders and the electrical properties of the sintered samples were studied with thermal expansion and a.c. impedance spectra, respectively. It was found that the nanometer YSZ powders can be directly synthesized by means of GNP when a molar ratio of the metal ions to glycine was 1∶2. The aver age crystallite size of the YSZ powders calcined at 600 and 1 000 ℃ are 9.85 a nd 40.5 nm, respectively. The sinterablity of the YSZ samples pre-sintered at 1 000 ℃ is significantly higher than that pre-sintered at 1 200 ℃. The relati ve density of the samples treated above is 99.3% and 98.6% sintered at 1 400 ℃ for 6 h, respectively, and the sintering temperature range is 1 400~1 450 ℃. The electrical conductivity of the above samples sintered at 1 450 ℃ is 0.037 and 0.021 S/cm at a measuring temperature of 850 ℃.
Key words: nanometer YSZ powder, glycine-nitrate process, electri cal properties, densification
CLC Number:
WANG De, HE Qiang, PEI Li, HE Tian-min. Preparation and properties of nanometer YSZ powdersby glycine-nitrate process[J].J4, 2004, 42(02): 261-264.
0 / / Recommend
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
URL: http://xuebao.jlu.edu.cn/lxb/EN/
http://xuebao.jlu.edu.cn/lxb/EN/Y2004/V42/I02/261
Cited