吉林大学学报(信息科学版) ›› 2020, Vol. 38 ›› Issue (3): 243-249.

• • 上一篇    下一篇

典型模拟电路性能退化仿真技术研究

聂国健1,于迪1,常玉春2,刘岩2,杨云1,李欣荣1   

  1. 1. 工业和信息化部电子第五研究所可靠性数据中心,广州510610; 2. 大连理工大学微电子学院,辽宁大连116000
  • 收稿日期:2019-10-30 出版日期:2020-05-24 发布日期:2020-06-23
  • 通讯作者: 李欣荣( 1992— ) ,男,山西岚县人,工业和信息化部电子第五研究所工程师,主要从事元器件质量与可靠性仿真技术研究,( Tel) 86-20-87237237( E-mail) 270906397@ qq. com。 E-mail:270906397@ qq. com
  • 作者简介:聂国健( 1978— ) ,女,天津人,工业和信息化部电子第五研究所高级工程师,主要从事元器件质量与可靠性技术研究,( Tel) 86-20-87237151( E-mail) niegj@ ceprei. com; 通讯作者: 李欣荣( 1992— ) ,男,山西岚县人,工业和信息化部电子第五研究所工程师,主要从事元器件质量与可靠性仿真技术研究,( Tel) 86-20-87237237( E-mail) 270906397@ qq. com。
  • 基金资助:
    国家自然科学基金资助项目( 11975066) ; 科工局技术基础科研基金资助项目( JSZL2017610B001)

Research on Simulation Technology of Typical Analog Circuit Performance Degradation

NIE Guojian1,YU Di1,CHANG Yuchun2,LIU Yan2,YANG Yun1,LI Xinrong1   

  1. 1. Reliability Data Center,The Fifth Electronic Research Institute of MIIT,Guangzhou 510610,China;
    2. School of Microelectronics,Dalian University of Technology,Dalian 116000,China
  • Received:2019-10-30 Online:2020-05-24 Published:2020-06-23

摘要: 为解决典型模拟电路在设计阶段可能引入的性能退化问题,通过分析国内外电路虚拟验证技术研究进
展,并针对引起模拟电路性能退化的HCI( Hot Carrier Induced) 、NBTI( Negative Bias Temperature Instability) 、
TDDB( Time Dependent Dielectric Breakdoun) 等机理模型进行深入研究,开展了性能退化仿真流程模型设计、
失效物理模型推导建立及模型参数提取3 项关键工作。基于上述关键技术研究,选取典型模拟运算放大器,
采用Cadence spectre 软件开展了性能退化仿真研究。最终得出器件在25 ℃下,工作2 年和10 年后的性能退化
情况,验证了该仿真方法的可行性。该结论可在模拟电路设计阶段,为其设计改进工作提供初步支撑。

关键词: 模拟电路, 性能退化, 可靠性, 仿真

Abstract: In order to solve the performance degradation problem that may be introduced by typical analog
circuits in the design stage,the research progress of circuit virtual verification technology is analyzed at home and
abroad,the mechanism models such as HCI ( Hot Carrier Induced ) ,NBTI ( Negative Bias Temperature
Instability) and TDDB ( Time Dependent Dielectric Breakdoun) which cause the performance degradation of
analog circuits are deeply studied. Furthermore,three key tasks are carried out which contains the design of
performance degradation simulation process model,the derivation of the failure physical model and the extraction
of model parameters. Based on the research,a typical analog operational amplifier is selected to simulation the
performance degradation by Cadence spectre software. The performance degradation of the device proves that the
proposed simulation method is feasible at 25 ℃ after two years and ten years of operation. This conclusion can
provide preliminary support information for the improvement design work in the design stage of the analog circuit.

Key words: analog circuit, performance degradation, reliability, simulation

中图分类号: 

  • TN710. 2