,PtS2 / MoTe2 heterojunction infrared photodetector, optical responsivity, detection rate, photoconductivity gain ,"/> 高性能<span> PtS<sub>2</sub> / MoTe<sub>2</sub> </span>异质结红外光电探测器

吉林大学学报(信息科学版) ›› 2024, Vol. 42 ›› Issue (1): 74-80.

• • 上一篇    下一篇

高性能 PtS2 / MoTe2 异质结红外光电探测器

 潘生生1 , 袁 涛1 , 周孝好2 , 王 振2   

  1. 1. 上海理工大学 理学院, 上海 200093; 2. 中国科学院 上海技术物理研究所, 上海 200092
  • 收稿日期:2023-01-12 出版日期:2024-01-29 发布日期:2024-02-04
  • 通讯作者: 袁涛(1983— ), 女, 上海人, 上海理工大学教授, 博士, 主要从事新能源材料研究, (Tel)86-18110763228(E-mail)4673250167@ qq. com
  • 作者简介:潘生生(1995— ), 男, 合肥人, 上海理工大学硕士研究生, 主要从事二维光电材料研究, (Tel)86-18742133664(E-mail) 2351948787@ qq. com
  • 基金资助:
    上海市自然科学基金资助项目(15ZR1627300) 

High Performance PtS2 / MoTe2 Heterojunction Infrared Photodetector

PAN Shengsheng 1 , YUAN Tao 1 , ZHOU Xiaohao 2 , WANG Zhen   

  1. 1. College of Science, Shanghai University of Technology, Shanghai 200093, China; 2. Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200092, China
  • Received:2023-01-12 Online:2024-01-29 Published:2024-02-04

摘要: 由于光电探测器的工作性能直接关系到系统数据采集质量, 为此, 对高性能 PtS2 / MoTe2 异质结红外光电 探测器进行了研究。 通过选取材料、 试剂和设备制作了 PtS2 / MoTe2 异质结红外光电探测器。 搭建探测器性能 测试环境, 并利用光响应度、 探测率、 响应时间和光电导增益 4 个指标, 分析探测器性能。 结果表明, 随着 测试时间的推移, PtS2 / MoTe2 异质结红外光电探测器的光响应度数值始终处于 5 A/ W 限值以上; 无论对采集 何种材质反射的红外光, 探测器探测率均大于 10 cm·Hz1 / 2 W -1 ; 无论光生电流是处于上升还是下降时间, 其响应时间始终在限值 150 μs 以下; 光电导增益值保持在 80% 以上。

关键词: PtS2 / MoTe2 异质结红外光电探测器, 光响应度, 探测率, 光电导增益 

Abstract: As one of the important components of the detection system, the performance of photoelectric detector is directly related to the quality of system data acquisition. In order not to affect the final detection result, it is essential to ensure the detector performance. The performance of high performance PtS2 / MoTe2 heterojunction infrared photodetector is studied. First, the materials, reagents and equipment are prepared to make PtS2 / MoTe2 heterojunction infrared photodetectors. The detector performance test environment, the four indicators of light response, detection rate, response time and photoconductivity gain are set up, and the detector performance is analyzed. The results show that the optical responsivity of PtS2 / MoTe2 heterojunction infrared photodetector is always above the 5 A/ W limit with the passage of test time. The detection rate of the detector is greater than 10 cm·Hz1 / 2 W -1 regardless of the infrared light reflected from any material. Whether the photocurrent is in the rising time or the falling time, its response time is always below the limit of 150 μs; The photoconductivity gain value has been kept above 80% . 

Key words:  ')">

 , PtS2 / MoTe2 heterojunction infrared photodetector, optical responsivity, detection rate, photoconductivity gain

中图分类号: 

  •