射流式液动锤活塞回程缓冲机构

J4 ›› 2010, Vol. 40 ›› Issue (6): 1415-1418.

射流式液动锤活塞回程缓冲机构

张永光|彭枧明|柳鹤|殷其雷|范黎明

吉林大学建设工程学院/国土资源部复杂条件钻进技术开放研究实验室/教育部地球探测技术与仪器重点实验室|长春 130026

收稿日期:2010-04-20 出版日期:2010-11-26 发布日期:2010-11-26
通讯作者: 彭枧明（1975-），男，江西贵溪人，副教授，博士，主要从事多工艺冲击回转钻进技术研究，Tel：0431-88502337 E-mail:jlupjm@email.jlu.edu.cn
作者简介:张永光(1982-)|男|山西岢岚人|博士研究生|主要从事多工艺冲击回转钻进技术研究|E-mail:zhangyg08@mails.jlu.edu.cn
基金资助:
国家“863”计划项目(2006AA06A109[CD*2]3[CD*2]2[CD*2]1)

Buffering the Backward Impact of Piston of Liquid-Jet Hammer

ZHANG Yong-guang, PENG Jian-ming, LIU He, YIN Qi-Lei, FAN Li-ming

College of Construction Engineering / Laboratory of Technology for Drilling Under Complex Condition of Ministry of Land and Resources/ Key Laboratory of Geodetection Technology &|Instrumentation of Ministry of Education, Jilin University|Changchun 130026, China

Received:2010-04-20 Online:2010-11-26 Published:2010-11-26

摘要/Abstract

摘要：

CFD动态分析了回程缓冲机构不同弹簧刚度系数对射流元件控制道内流动特性和活塞回程冲击速度的影响。实验结果表明：缓冲机构施加在活塞上的弹簧作用力不会影响射流元件主射流的正常附壁和切换，刚度系数较大的弹簧可以显著降低活塞回程冲击速度，减小回程中活塞对射流元件的冲击；弹簧增幅在5倍时，活塞回程冲击速度降幅为52.88%，有效避免了射流元件中硬质合金零件在工作中发生断裂的现象。

关键词: 活塞, 回程缓冲, 主射流切换, CFD动态分析

Abstract:

The effect of rigidity of buffering spring on the flowing character of the liquid in the controlling passages of fluidic element and the backward impact velocity of the piston is studied by means of CFD dynamic analysis and is validated by experiments. The results show that exerting spring force axially on the piston has no effect on the switch of the main jet in the fluidic element, and buffering spring with proper rigidity can make the backward impact velocity decrease greatly, the backward impact velocity of the piston will reduce 52.88% when rigidity of spring enhances five times, which is helpful for reducing impact loads and keeping the parts made of tungsten carbide in the fluidic elements from breaking when the liquid-jet hammer works in well drilling.

Key words: piston, backward impact buffering, main jet switch, CFD dynamic analysis

中图分类号:

P634.4

张永光, 彭枧明, 柳鹤, 殷其雷, 范黎明. 射流式液动锤活塞回程缓冲机构[J]. J4, 2010, 40(6): 1415-1418.

ZHANG Yong-guang, PENG Jian-ming, LIU He, YIN Qi-Lei, FAN Li-ming. Buffering the Backward Impact of Piston of Liquid-Jet Hammer[J]. J4, 2010, 40(6): 1415-1418.

参考文献

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

[1]	张鑫鑫, 彭枧明, 孙铭泽, 吴冬宇. 基于CFD的高能射流式液动冲击器活塞与缸体密封特性研究[J]. 吉林大学学报(地球科学版), 2017, 47(2): 534-541.
[2]	王福平, 李鹏, 李国琳, 彭枧明. 基于Ls-Dyna的高能射流式冲击器活塞杆回程应力分析[J]. 吉林大学学报(地球科学版), 2016, 46(5): 1482-1489.
[3]	李国琳, 彭枧明, 柳鹤, 赵志强. 液动锤射流元件喷嘴临界流速预测与验证[J]. J4, 2010, 40(1): 159-163.