Journal of Jilin University(Earth Science Edition) ›› 2017, Vol. 47 ›› Issue (1): 203-214.doi: 10.13278/j.cnki.jjuese.201701207
Previous Articles Next Articles
Lan Kai, Liu Xiangfeng
CLC Number:
| [1] Lubinski A. Developments in Petroleum Engineering[M]. Houston:Gulf Publishing Co, 1987. [2] Elsayed M A, Raymond D W. Analysis of Coupling Between Axial and Torsional Vibration in a Compliant Model of a Drillstring Equipped with a PDC Bit[C]//ASME 2002 Engineering Technology Conference on Energy. Houston:American Society of Mechanical Engineers, 2002:897-904. [3] Ai Chi, Zhang Jinan, Ge Weitao, et al. Prediction of Fatigue Life of Drillstring Under Axial-Torsional-Combined Vibration[C]//SPE Gas Technology Symposium in Calgray. Alberta:Society of Petroleum Engineers,2006:SPE-99356-MS. [4] Sampaio R, Piovan M T, Lozano G V. Coupled Axial/Torsional Vibrations of Drill-Strings by Means of Non-Linear Model[J]. Mechanics Research Communications, 2007, 34(5):497-502. [5] Voronov S A, Gouskov A M, Kvashnin A S, et al. Influence of Torsional Motion on the Axial Vibrations of a Drilling Tool[J]. Journal of Computational and Nonlinear Dynamics, 2007, 2(1):58-64. [6] Germay C, Van de Wouw N, Nijmeijer H, et al. Nonlinear Drillstring Dynamics Analysis[J]. SIAM Journal on Applied Dynamical Systems, 2009, 8(2):527-553. [7] Yigit A S, Christoforou A P. Coupled Axial and Transverse Vibrations of Oilwell Drillstrings[J]. Journal of Sound and Vibration, 1996, 195(4):617-627. [8] Christoforou A P, Yigit A S. Dynamic Modelling of Rotating Drillstrings with Borehole in Teractions[J]. Journal of Sound and Vibration, 1997, 206(2):243-260. [9] Trindade M A, Wolter C, Sampaio R. Karhunen-Loeve Decomposition of Coupled Axial/Bending Vibrations of Beams Subject to Impacts[J]. Journal of Sound and Vibration, 2005, 279(3):1015-1036. [10] Sahebkar S M, Ghazavi M R, Khadem S E, et al. Nonlinear Vibration Analysis of an Axially Moving Drillstring System with Time Dependent Axial Load and Axial Velocity in Inclined Well[J]. Mechanism and Machine Theory, 2011, 46(5):743-760. [11] 闫铁, 王雪刚, 李杉,等. 钻柱轴向与横向耦合振动的有限元分析[J]. 石油矿场机械, 2012, 41(3):39-42. Yan Tie, Wang Xuegang, Li Shan, et al. Finite Element Analysis of Longitudinal and Lateral Coupled Vibration of Drillstring[J]. Oil Field Equipment, 2012, 41(3):39-42. [12] Ghasemloonia A, Rideout D G, Butt S D. Vibration Analysis of a Drillstring in Vibration-Assisted Rotary Drilling:Finite Element Modeling with Analytical Validation[J]. Journal of Energy Resources Technology, 2013, 135(3):364-392. [13] Ghasemloonia A, Rideout D G, Butt S D. Analysis of Multi-Mode Nonlinear Coupled Axial-Transverse Drillstring Vibration in Vibration Assisted Rotary Drilling[J]. Journal of Petroleum Science and Engineering, 2014, 116:36-49. [14] Yigit A S, Christoforou A P. Coupled Torsional and Bending Vibrations of Drillstrings Subject to Impact with Friction[J]. Journal of Sound and Vibration, 1998, 215(1):167-181. [15] Yigit A S, Christoforou A P. Coupled Torsional and Bending Vibrations of Actively Controlled Drillstrings[J]. Journal of Sound and Vibration,2000, 234(1):67-83. [16] Al-Hiddabi S A, Samanta B, Seibi A. Non-Linear Control of Torsional and Bending Vibrations of Oilwell Drillstrings[J]. Journal of Sound and Vibration, 2003, 265(2):401-415. [17] Leine R I, Van Campen D H, Keultjes W J G. Stick-Slip Whirl Interaction in Drillstring Dynamics[J]. Journal of Vibration and Acoustics, 2002, 124(2):209-220. [18] Melakhessou H, Berlioz A, Ferraris G. A Nonlinear Well-Drillstring Interaction Model[J]. Journal of Vibration and Acoustics, 2003, 125(1):46-52. [19] Liao C M, Balachandran B, Karkoub M, et al. Drill-String Dynamics:Reduced-Order Models and Experimental Studies[J]. Journal of Vibration and Acoustics, 2011, 133(4):3443-3445. [20] Christoforou A P, Yigit A S. Active Control of Stick-Slip Vibrations:The Role of Fully Coupled Dynamics[C]//SPE Middle East Oil Show. Manama:Society of Petroleum Engineers, 2001. [21] 朱才朝, 谢永春, 刘清友, 等. 牙轮钻头纵向横向扭转振动动力学仿真研究[J]. 振动与冲击, 2002, 21(1):46-51. Zhu Caichao, Xie Yongchun, Liu Qingyou, et al. Dynamic Simulation of Roller Cone Bit System with Lengthways, Transverse and Torsional Vibrations[J]. Journal of Vibration and Shock, 2002, 21(1):46-51. [22] 祝效华, 刘清友, 童华. 牙轮钻头动力学特性仿真研究[J]. 石油学报, 2004, 25(4):96-100. Zhu Xiaohua, Liu Qingyou, Tong Hua. Emulation Research on Dynamics of Roller Cone Bit[J]. Acta Petrolei Sinica, 2004, 25(4):96-100. [23] 祝效华, 刘清友, 童华. 三维井眼全井钻柱系统动力学模型研究[J]. 石油学报, 2008, 29(2):288-291, 295. Zhu Xiaohua, Liu Qingyou, Tong Hua. Research on Dynamics Model of Full Hole Drilling-String System with Three-Dimensional Trajectory[J]. Acta Petrolei Sinica, 2008, 29(2):288-291, 295. [24] Khulief Y A, Al-Naser H. Finite Element Dynamic Analysis of Drillstrings[J]. Finite Elements in Analysis and Design, 2005, 41(13):1270-1288. [25] Khulief Y A, Al-Sulaiman F A, Bashmal S. Vibra-tion Analysis of Drillstrings with String-Borehole Interaction[J]. Proceedings of the Institution of Mechanical Engineers:Part C:Journal of Mechanical Engineering Science, 2008, 222(11):2099-2110. [26] 胡以宝. 基于实际井眼轨迹的钻柱动力学特性有限元分析[D]. 上海:上海大学, 2011. Hu Yibao. Finite Element Analysis of Dynamic Characteristics of Drillstring Based on Actual Well Path[D]. Shanghai:Shanghai University, 2011. [27] Shi M, Schiefer F, Ostermeyer G P. A Contribution to Efficient Calculation of Complex Drill String Dynamics for Deep Hole Drilling[J]. PAMM, 2011, 11(1):71-72. [28] Pogorelov D,Mikheev G,Lysikov N,et al. A Multibody System Approach to Drill String Dynamics Modeling[C]//ASME 201211th Biennial Conference on Engineering Systems Design and Analysis.[S.l.]:American Society of Mechanical Engineers, 2012:53-62. [29] Yu Guijie, Fu Lei, Xiao Wensheng, et al. Vibration Analysis of Flexible Multi-Body Drill String System by FSI[J]. Applied Mechanics and Materials,2012, 184/185:631-640. [30] 程载斌, 姜伟, 任革学, 等. 全井钻柱系统多体动力学模型[J]. 石油学报, 2013, 34(4):753-758. Cheng Zaibin, Jiang Wei, Ren Gexue, et al. A Multibody Dynamical Model of Full-Hole Drillstring System[J]. Acta Petrolei Sinica, 2013, 34(4):753-758. [31] 程载斌, 姜伟, 蒋世全, 等. 全井钻柱系统耦合振动多体动力学模型的建立与算例分析[J]. 中国海上油气, 2014, 26(4):71-76. Cheng Zaibin, Jiang Wei, Jiang Shiquan, et al. A Multibody Dynamical Model and Example Analysis of Full Holedrillstring for Fully Coupled Vibration[J]. China Offshore Oil and Gas, 2014, 26(4):71-76. [32] Wang Ningyu, Cheng Zaibin, Lu Yingjie, et al. A Multibody Dynamics Model of Contact Between the Drillstring and the Wellbore and the Rock Penetration Process[J]. Advances in Mechanical Engineering, 2015, 7(5):1-12. [33] Fallahi E. Investigation of Coupled Axial-Lateral-Torsional Drillstring Vibrations Using a Multi-Body Dynamics Approach[D]. St John's:Memorial University of Newfoundland, 2014. [34] Elliott A S, Hutchinson M. Fully-Coupled Nonlinear 3-D Time-Domain Simulation of Drilling Dysfunctions Using a Multi-Body Dynamics Approach[C]//SPE/IADC Drilling Conference and Exhibition. London:Society of Petroleum Engineers, 2015. [35] Ghasemloonia A, Rideout D G, Butt S D. A Review of Drillingstring Vibration Modeling and Suppression Methods[J]. Journal of Petroleum Science and Engineering, 2015, 131:150-164. [36] Berlioz A, Der Hagopian J, Dufour R, et al. Dynamic Behavior of a Drill-String:Experimental Investigation of Lateral Instabilities[J]. Journal of Vibration and Acoustics, 1996, 118(3):292-298. [37] Elsayed M A, Aissi C. Analysis of Shock Absorber Characteristics for Drillstrings[C]//ASME 8th Biennial Conference on Engineering Systems Design and Analysis. Chicago:American Society of Mechanical Engineers, 2006:93-101. [38] Melakhessou H, Berlioz A, Ferraris G. A Nonlinear Well-Drillstring Interaction Model[J]. Journal of Vibration and Acoustics, 2003, 125(1):46-52. [39] Mihajlovic N, Van de Wouw N, Hendriks M P M, et al. Friction-Induced Limit Cycling in Flexible Rotor Systems:An Experimental Drill-String Set-up[J]. Nonlinear Dynamics, 2006, 46(3):273-291. [40] Raymond D W, Elsayed M A, Polsky Y, et al. Laboratory Simulation of Drill Bit Dynamics Using a Model-Based Servohydraulic Controller[J]. Journal of Energy Resources Technology, 2007, 130(4):905-914. [41] Khulief Y A, Al-Sulaiman F A. Laboratory Inves-tigation of Drillstring Vibrations[J]. Proceedings of the Institution of Mechanical Engineers:Part C:Journal of Mechanical Engineering Science, 2009, 223(10):2249-2262. [42] Franca L F P. Drilling Action of Roller-Cone Bits:Modeling and Experimental Validation[J]. Journal of Energy Resources Technology, 2010, 132(4):103-113. [43] Forster I. Axial Excitation as a Means of Stick Slip Mitigation-Small Scale Rig Testing and Full Scale Field Testing[C]//SPE/IADC Drilling Conference and Exhibition. Amsterdam:Society of Petroleum Engineers, 2011. [44] Esmaeili A, Elahifar B, Fruhwirth R K, et al. Laboratory Scale Control of Drilling Parameters to Enhance Rate of Penetration and Reduce Drill String Vibration[C]//SPE Saudi Arabia Section Technical Symposium and Exhibition.[S.l.]:Society of Petroleum Engineers, 2012. [45] Westermann H, Gorelik I, Rudat J, et al. A New Test Rig for Experimental Studies of Drillstring Vibrations[J]. SPE Drilling & Completion, 2015, 30(2):119-128. [46] Wiercigroch M, Kapitaniak M, Nandakumar K, et al. Unveiling Complexities of Drill-String and BHA Dynamics on New Experimental Rig[C]//Steffen Jr V, Rade D A, Bessa W M. Proceedings of the XVII International Symposium on Dynamic Problems of Mechanics. Seewinkel:World Scientific, 2014:1-4. [47] 章扬烈, 肖载阳, 端木纲. 旋转钻柱运动原理的研究[J]. 石油矿场机械, 1988, 12(2):1-7. Zhang Yanglie, Xiao Zaiyang, Duanmu Gang. Research on Rotary Drill String Movement Principle[J]. Oil Field Equipment, 1988, 12(2):1-7. [48] 管志川, 靳彦欣, 王以法. 直井底部钻柱运动状态的实验研究[J]. 石油学报, 2003, 24(6):102-106. Guan Zhichuan, Jin Yanxin, Wang Yifa. Experimental Research on Motion Behavior of Bottom Drill String in Straight Hole[J]. Acta Petrolei Sinica, 2003, 24(6):102-106. [49] 管志川, 邵冬冬, 温欣, 等. 水平井眼中旋转钻柱运动特性的实验研究[J]. 工程力学, 2013, 30(5):340-345. Guan Zhichuan, Shao Dongdong, Wen Xin, et al. Experimental Research on Motion States of Bottom Drilling String in Horizontal Well[J]. Engineering Mechanics, 2013, 30(5):340-345. [50] 罗敏, 栾一秀, 郭帅, 等. 直井内旋转钻柱动力学有限元分析及实验研究[J]. 科学技术与工程, 2010, 10(2):410-414,424. Luo Min, Luan Yixiu, Guo Shuai, et al. Finite Element Analysis of Dynamics and Experimental Study About Rotating Drillstring in Vertical Well[J]. Science Technology and Engineering, 2010, 10(2):410-414, 424. [51] 吴少博, 程学亮, 李治淼. 流体作用下钻柱运动状态试验研究[J]. 石油矿场机械, 2012, 41(1):37-42. Wu Shaobo, Cheng Xueliang, Li Zhimiao. Experimental Research on Motion Behavior of Drill String Under Fluid Action[J]. Oil Field Equipment, 2012, 41(1):37-42. [52] 马斐, 施太和. 钻柱振动的地面监测[J]. 华南理工大学学报(自然科学版), 1996, 24(12):6-10. Ma Fei, Shi Taihe. Surface Detection of Drillstring Vibration[J]. Journal of South China University of Technology (Natural Science Edition), 1996, 24(12):6-10. [53] 高岩, 陈亚西, 郭学增. 钻柱振动信号采集系统及谱分析[J]. 录井工程, 1998, 9(3):44-51. Gao Yan, Chen Yaxi, Guo Xuezeng. The Acquisition System for Drill String Vibration Signals and the Spectrum Analysis[J]. Mud Logging Engineering, 1998, 9(3):44-51. [54] 高岩, 武凤旺, 梁占良. 钻柱振动声波录井技术方法及应用实例[J]. 录井工程, 2009, 20(1):1-7. Gao Yan, Wu Fengwang, Liang Zhanliang. Drillstringvibro-Acoustic Logging Method and Application Examples[J]. Mud Logging Engineering, 2009, 20(1):1-7. [55] 刘瑞文, 管志川, 李春山. 钻柱振动信号在线监测及应用[J]. 振动与冲击, 2013, 32(1):60-64. Liu Ruiwen, Guan Zhichuan, Li Chunshan. Drilling String Vibration Online Monitoring and Its Application[J]. Journal of Vibration and Shock, 2013, 32(1):60-64. [56] 管志川, 韩志勇, 王以法, 等. 井下钻柱受力实测接头研究[J]. 中国石油大学学报(自然科学版), 2002, 26(4):29-32, 35. Guan Zhichuan, Han Zhiyong, Wang Yifa, et al. Development of a Kind of Device for Measuring the Force Acted on Drillstring in Borehole[J]. Journal of China University of Petroleum (Edition of Social Sciences), 2002, 26(4):29-32, 35. [57] 崔学政, 管志川, 韩志勇, 等. 钻柱测量接头的机械结构设计与制造[J]. 机械设计, 2002, 19(3):30-32. Cui Xuezheng, Guan Zhichuan, Han Zhiyong, et al. Structural Design and Manufacturing of Machinery for Measuringjoint of Drill Rod[J]. Journal of Machine Design, 2002, 19(3):30-32. [58] 赖欣, 胡泽, 赖晓斌, 等. DSP在随钻井下管柱参数测量系统中的应用[J]. 中国仪器仪表, 2006(6):80-83. Lai Xin, Hu Ze, Lai Xiaobin, et al. Application of DSP for Measuring Parameters System of Pipe Strings While Drilling[J]. China Instrumentation, 2006(6):80-83. [59] 翟小强, 王瑛, 刘伟, 等. 存储式井下振动测量工具的设计与室内试验[J]. 石油钻探技术, 2011, 39(4):111-114. Zhai Xiaoqiang, Wang Ying, Liu Wei, et al. Design and Laboratory Test of Memory Downhole Vibration Measurement Instrument[J]. Petroleum Drilling Techniques, 2011, 39(4):111-114. [60] 曾强, 艾维平, 贾衡天, 等. 井下三轴振动信号同步采集与大容量存储系统设计[J]. 测控技术, 2012, 31(3):24-27. Zeng Qiang, Ai Weiping, Jia Hengtian, et al. 3-Axis Vibration Signal Synchronous Acquisition and Bulk Data Real-Time Storage While Drilling[J]. Measurement and Control Technology, 2012, 31(3):24-27. [61] 姚文彬, 李辉, 尚捷. 井下振动实时测量存储系统设计[J]. 电子测量技术, 2013, 36(3):106-109. Yao Wenbin, Li Hui, Shang Jie. Design of Downhole Vibration Real-Time Measuring and Storage System[J]. Electronic Measurement Technology, 2013, 36(3):106-109. [62] Zhu Xiaohua, Tang Liping, Yang Qiming. Alitera-ture Review of Approaches for Stick-Slip Vibration Suppression in Oilwell Drillstring[J]. Advance in Mechanical Engineering, 2014, 6:1378-1388. [63] 侯子旭, 贾晓斌, 李双贵, 等. 玉北地区深部地层扭力冲击器提速工艺[J]. 石油钻采工艺, 2013, 35(5):132-136. Hou Zixu, Jia Xiaobin, Li Shuanggui, et al. Research on the Torsion Impact Generator for Speeding up Drilling in Deep Formation of Yubei Area[J]. Oil Drilling & Production Technology, 2013, 35(5):132-136. [64] 赵洪山, 周燕, 王涛,等. 哈山3井火成岩地层钻井难点与提速对策[J]. 石油机械, 2014, 42(9):40-43. Zhao Hongshan, Zhou Yan, Wang Tao, et al. Difficulties in Drilling Igneous Rock Formations and Proposed ROP Improvement for Well Hashan 3[J]. China Petroleum Machinery, 2014, 42(9):40-43. [65] 龙刚, 刘伟, 管志川, 等. 元坝地区陆相地层钻井提速配套技术[J]. 天然气工业, 2013, 33(7):80-84. Long Gang, Liu Wei, Guan Zhichuan, et al. ROP Enhancing Technologies for Ultra-Deep Wells in the Continental Strata in the Yuanba Gas Field, Sichuan Basin[J]. Natural Gas Industry, 2013, 33(7):80-84. [66] 张海山, 葛俊瑞, 杨进, 等. 扭力冲击器在海上深部地层的提速效果评价[J]. 断块油气田, 2014, 21(2):249-251. Zhang Haishan, Ge Junrui, Yang Jin, et al. Effect Evaluation of Torsion Impactor for Increasing ROP in Offshore Deep Formation[J]. Fault-Block Oil & Gas Field, 2014, 21(2):249-251. [67] Runia D J, Dwars S, Stulemeijer I. A Brief History of the Shell "Soft Torque Rotary System" and some Recent Case Studies[C]//SPE/IADC Drilling Conference. Amsterdam:Society of Petroleum Engineers, 2013. [68] Akutsu E, Rødsjø M, Gjertsen J, et al. Faster ROP in Hard Chalk:Proving a New Hypothesis for Drilling Dynamics[C]//SPE/IADC Drilling Conference and Exhibition. London:Society of Petroleum Engineers, 2015. [69] 刘希茂, 范春英, 高巧娟, 等. 随钻恒扭器的研制及现场应用[J]. 石油机械, 2015, 43(5):32-35. Liu Ximao, Fan Chunying, Gao Qiaojuan, et al. Development and Field Application of Drilling Torque Stabilizer[J]. China Petroleum Machinery, 2015, 43(5):32-35. [70] 彭明旺,白彬珍,王轲,等.随钻恒扭器在TH121125井的试验[J]. 石油钻探技术, 2014, 42(6):120-123. Peng Mingwang, Bai Binzhen, Wang Ke, et al. Test of Constant Torque Converter While Drilling in Well TH121125[J]. Petroleum Drilling Techniques, 2014, 42(6):120-123. [71] 杜晓瑞, 李华泰. 钻井工具手册[M].北京:中国石化出版社, 2012. Du Xiaorui, Li Huatai. Drilling Tools Handbook[M]. Beijing:China Petrochemical Press, 2012. [72] 范春英, 张国田, 郭建庄, 等. 液压机械式钻柱减震器的研制[J]. 石油机械, 2009, 37(9):68-70, 73. Fan Chunying, Zhang Guotian, Guo Jianzhuang, et al. Development of the Hydraulic Mechanical Drill String Damper[J]. China Petroleum Machinery, 2009, 37(9):68-70, 73. [73] Hutchinson M, Burgess D, Thompson F, et al. Self-Adapting Bottom Hole Assembly Vibration Suppression[C]//SPE Annual Technical Conference and Exhibition. New Orleans:Society of Petroleum Engineers, 2013. [74] 张晓东, 李俊, 梁红军. 减震器安装位置对钻柱纵向振动影响的研究[J]. 西南石油大学学报(自然科学版), 2007, 29(3):146-149. Zhang Xiaodong, Li Jun, Liang Hongjun. Influence of Shock Absorber Installation Position on the Drill String Longitudinal Vibration[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2007, 29(3):146-149. [75] 何逸飞, 郑平, 刘祚才, 等. 减振器减振效果的控制因素分析[J]. 石油矿场机械, 2008, 37(11):33-36. He Yifei, Zheng Ping, Liu Zuocai, et al. Analysis of Controlling Factors of Damping Effect of Absorber[J]. Oil Field Equipment, 2008, 37(11):33-36. [76] 王文龙, 李子丰. 不同激振条件下减振器对钻柱纵向振动的影响[J]. 工程力学, 2011, 28(4):221-225. Wang Wenlong, Li Zifeng. Influence of Shock Absorber on Longitudinal Vibration of Drill String Under Different Vibration Inducing Conditions[J]. Engineering Mechanics, 2011, 28(4):221-225. [77] 祝效华, 胡志强. 减振器对井下钻具振动特性的影响分析[J]. 振动与冲击, 2013, 32(17):128-132. Zhu Xiaohua, Hu Zhiqiang. Influence of Shock Absorber on Down-Hole Drilling Tools' Vibration Characteristics[J]. Journal of Vibration and Shock, 2013, 32(17):128-132. [78] 沈子俊, 狄勤丰, 王明杰, 等. 基于全井钻柱动力学的轴向减振器安放位置确定[J]. 钻采工艺, 2014, 37(3):85-87, 91. Shen Zijun, Di Qinfeng, Wang Mingjie, et al. Determination of Drillstring Shock Sub Placement Based on Drill String Dynamics[J]. Drilling & Production Technology, 2014, 37(3):85-87, 91. [79] 田家林, 杨志, 付传红, 等. 高频微幅冲击振动作用下岩石破碎行为计算方法[J]. 吉林大学学报(地球科学版), 2015, 45(6):1808-1816. Tian Jialin, Yang Zhi, Fu Chuanhong, et al. Calculation Method of Rock-Breaking Behavior Under Impact Vibration of High Frequency and Micro Amplitude[J]. Journal of Jilin University (Earth Science Edition), 2015, 45(6):1808-1816. [80] Ledgerwood III L W, Jain J R, Hoffmann O J, et al. Downhole Measurement and Monitoring Lead to an Enhanced Understanding of Drilling Vibrations and Polycrystalline Diamond Compact Bit Damage[J]. SPE Drilling & Completion, 2013, 28(3):254-262. [81] Oueslati H, Hohl A, Makkar N, et al. The Need for High Frequency Vibration Measurement Along with Dynamics Modeling to Understand the Genesis of PDC Bit Damage[C]//IADC/SPE Drilling Conference and Exhibition. Fort Worth:Society of Petroleum Engineers, 2014. [82] 邹德永, 孙源秀, 于鹏, 等. 锥形齿PDC钻头台架试验研究[J]. 中国石油大学学报(自然科学版), 2015, 39(2):48-52. Zou Deyong, Sun Yuanxiu, Yu Peng, et al. Experiment Study on Bench Test of Stinger PDC Bit[J]. Journal of China University of Petroleum (Edition of Natural Science), 2015, 39(2):48-52. [83] 杨顺辉. 锥型PDC齿钻头的研制及室内试验评价[J]. 石油机械, 2015, 43(2):14-17. Yang Shunhui. Development and Laboratory Tests Evaluation of PDC Bit with Conical Cutter[J]. China Petroleum Machinery, 2015, 43(2):14-17. [84] Jain J R, Ledgerwood L W, Hoffmann O J M, et al. Mitigation of Torsional Stick-Slip Vbrations in Oil Well Drilling Through PDC Bit Design:Putting Theories to the Test[C]//SPE Annual Technical Conference and Exhibition. Denver:Society of Petroleum Engineers, 2011. [85] Akinniranye G, Megat A, Elsweisy H, et al. Imple-mentation of a Shock and Vibration Mitigation Process:Achieving Real-Time Solutions and Savings[J]. SPE Drilling & Completion, 2009, 24(2):301-310. |
| [1] | Jin Bo, Huang Xianxiong, Chang Guangfa, Zhang Shengbin, Fu Haibo, Li Tiezhu. Types and Distribution of Carboniferous Carbonate Reservoirs in Southern Д Area of Pre-Caspian Basin [J]. Journal of Jilin University(Earth Science Edition), 2014, 44(6): 2042-2050. |
|
||