Journal of Jilin University(Earth Science Edition) ›› 2017, Vol. 47 ›› Issue (2): 534-541.doi: 10.13278/j.cnki.jjuese.201702202

Previous Articles     Next Articles

Study on the Sealing Characteristics Between the Piston and Cylinder in the High-Energy Liquid-Jet Hammer Based on CFD Method

Zhang Xinxin, Peng Jianming, Sun Mingze, Wu Dongyu   

  1. College of Construction Engineering/Laboratory of Technology for Drilling Under Complex Condition of Ministry of Land and Resources, Jilin University, Changchun 130026, China
  • Received:2016-06-04 Online:2017-03-26 Published:2017-03-26
  • Supported by:
    Supported by Public Science and Technology Research Funds Projects of Ministry of Land and Resources of China(201311112)

Abstract: The sealing characteristics of the piston and cylinder in the SC-86 H high-energy liquid-jet hammer were studied based on computational fluid dynamics (CFD) analysis and laboratory tests. The effect on the leakage between the front chamber and rear chamber of the liquid-jet hammer were analyzed from the aspects of sealing length, annular gap, reciprocating motion velocity, angular velocity of the piston and the pitch and radius of the spiral groove on the outside surface of the piston. Results showed that little influence on the performance of the liquid-jet hammer was caused by the varying of sealing length, annular gap, angular velocity of the piston and the pitch of the spiral groove on the outside surface of the piston; The leakage between the front chamber and rear chamber is nearly proportional to the reciprocating motion velocity of the piston; While the radius of the spiral groove increased, the leakage increased remarkably; At the beginning of the forward and backward strokes, as the reciprocating velocity of the piston was quite slow, the leakage occupied a large proportion of the total liquid flow into the front chamber and rear chamber, instantaneously, the accelerated motion of the piston was influenced, especially when the diameter of the piston rod was larger to some extent, the piston would not be able to move backward easily, the performance of the liquid-jet hammer will got worse and even was unable to work.

Key words: computational fluid dynamics(CFD), high-energy liquid-jet hammer, piston, cylinder, leakage

CLC Number: 

  • TE242.7
[1] 菅志军,殷琨,蒋荣庆,等. 油气勘探钻井用液动射流式冲击器的研究与应用[J]. 世界地质,1998,17(4):88-92. Jian Zhijun, Yin Kun, Jiang Rongqing, et al. The Research on Hydro-Efflux DTH Hammer Applying to Oil and Gas Exploration Drilling[J]. Global Geology, 1998, 17(4):88-92.
[2] Deulsch U, Marx C, Rischmuller H. Evaluation of Hammer Drilling Potential for KTB in Supper-Deep Drilling and Deep Geophysical Sounding[M]. Heidelberg:Spring-Veerlag, 1995:310-320.
[3] 朴成哲,殷琨,蒋荣庆,等.KSC-127型射流式液动锤应用于大陆科学深钻的试验研究[J]. 世界地质,2000,19(3):295-298. Piao Chengzhe,Yin Kun,Jiang Rongqing,et al. Experimental Research on Application of KSC-127 Fluid Efflux Hammer in CSDP[J]. Global Geology, 2000, 19(3):295-298.
[4] 殷其雷,殷琨,柳鹤,等.潜孔锤反循环钻进技术在某水电站的试验应用[J]. 吉林大学学报(地球科学版),2014,44(3):961-968. Yin Qilei, Yin Kun, Liu He, et al. Application Test of DTH Hammer Reverse Circulation Drilling Technique in a Hydropower Station[J]. Journal of Jilin University(Earth Science Edition), 2014, 44(3):961-968.
[5] 王人杰, 蒋荣庆. 液动冲击回转钻进技术[M]. 北京:地质出版社,1988:97-104. Wang Renjie, Jiang Rongqing.Hydraulically Impacting-Rotary Drilling Technique[M]. Beijing:Geological Publishing House, 1988:97-104.
[6] 王福平,李鹏,李国琳,等. 基于LS-Dyna的高能射流式液动冲击器活塞杆回程应力分析[J]. 吉林大学学报(地球科学版),2016, 46(5):1482-1489. Wang Fuping, Li Peng, Li Guolin, et al. Stress Analysis of the Piston Rod Return in High-Energy Liquid-Jet Hammer Based on LS-Dyna[J]. Journal of Jilin University(Earth Science Edition), 2016, 46(5):1482-1489.
[7] 殷琨,王茂森,彭枧明,等.冲击回转钻进[M]. 北京:地质出版社,2010:60-77. Yin Kun, Wang Maosen, Peng Jianming, et al. Percussive-Rotary Drilling[M]. Beijing:Geological Publishing House, 2010:60-77.
[8] 菅志军,殷琨,蒋荣庆,等. 增大液动射流式冲击器单次冲击功的试验研究[J]. 长春科技大学学报,2000,30(3),303-306. Jian Zhijun, Yin Kun, Jiang Rongqing, et al. The Research on Increasing Impacting Energy of Hydro-Efflux Hammer[J]. Journal of Changchun University of Science and Technology, 2000, 30(3):303-306.
[9] 王清岩. 基于虚拟样机技术的动压反馈式液动冲击器结构设计与动态仿真分析[D]. 长春:吉林大学,2008:127-129. Wang Qingyan. Structure Design and Dynamic Simulation of Hydrokinetic Hammer with Dynamic Pressure Feedback Using Virtual Prototyping Technology[D]. Changchun:Jilin University, 2008:127-129.
[10] 杨晓宗.几何参数对螺旋密封性能影响的研究[D].上海:华东理工大学,2014:1-23. Yang Xiaozong. The Study of Influence on the Sealing Performance of Helical Seal with Geometric Parameters Change[D]. Shanghai:East China University of Science and Technology, 2014:1-23.
[11] Netzel J P, Volden Dong. Upstream Pumping:A New Concept in Mechanical Sealing Technology[J]. Lubrication Engineering, 1990, 45(4):213-217.
[12] Mc Grew J M, Mc Hugh J D. Analysis and Test of the Screw Seal in Laminar and Turbulent Operation[J]. The General Electric Advanced Technology Laboratories. 1963, 63(6):368-374.
[13] Asok S P, Sankaranarayanasamy K, Sundararajan T, et al. Pressure Drop and Cavitation Investigations on Static Helical-Grooved Square, Triangular and Curved Cavity Liquid Labyrinth Seals[J]. Nuclear Engineering and Design, 2011, 241(3):843-853.
[14] 王福军. 计算流体动力学分析:CFD软件原理与应用[M]. 北京:清华大学出版社,2004:63-159. Wang Fujun. The Analysis of Computational Fluid Dynamics:CFD Softw are Principle and Application[M]. Beijing:Tsinghua University Press, 2004:63-159.
[15] Mousavian S M, Najafi A F. Numerical Simulations of Gas-Liquid-Solid Flows in a Hydro Cyclone Separator[J]. Arch Appl Mech, 2009, 79:395-409.
[16] 周梓荣,彭浩舸,曾曙林,等.环形间隙中泄漏流量的影响因素研究[J].润滑与密封,2005,30(1):7-9. Zhou Zirong, Peng Haoge, Zeng Shulin, et al. Research on the Influence Factors of Leakage in Annular Clearance Seals[J]. Lubrication Engineering, 2005,30(1):7-9.
[17] 塔鲁达纳夫斯基. 非接触密封[M].北京:机械工业出版社,1986:8-12. Trutnovsky K. Non-Contact Sealing[M]. Beijing:China Machine Press, 1986:8-12.
[18] Fluent User's Guide[Z]. Release 6.3.26, Ansys Inc., USA, 2006.
[19] Nagano Y, Itazu Y Renormalization Group Theory for Turbulence:Eddy-Viscosity Type Model Based on an Iterative Averaging Method[J]. Physics of Fluids, 1997, 9:143-153.
[1] Mu Dunshan, Fu Guang, Chen Xueqing. Oil and Gas Leakage Positions of Fault Cap Rock Configuration and Its Control on Hydrocarbon Accumulation of Ng3 in Nanpu 1 Structure Area [J]. Journal of Jilin University(Earth Science Edition), 2018, 48(4): 1008-1017.
[2] Wang Fuping, Li Peng, Li Guolin, Peng Jianming. Stress Analysis of the Piston Rod Return in High-Energy Liquid-Jet Hammer Based on Ls-Dyna [J]. Journal of Jilin University(Earth Science Edition), 2016, 46(5): 1482-1489.
[3] Meng Qingsheng, Han Kai, Liu Tao, Gao Zhen. Leakage Detection in Waterproof Curtain of Soft Soil Foundation Pit [J]. Journal of Jilin University(Earth Science Edition), 2016, 46(1): 295-302.
[4] Wu Jian, Hu Xiangyang, Liang Yunan, Tang Di, Zheng Xiangwei. Evaluation Method of Saturation in Low Resistivity Reservoir in the Pearl River Estuary Basin [J]. Journal of Jilin University(Earth Science Edition), 2015, 45(1): 312-319.
[5] Du Shanghai,Su Xiaosi, Zheng Liange. Self-Repair Capacity Assessment of Shallow Aquifer Under Natural Condition After the Carbon Dioxide Leakage Stopped [J]. Journal of Jilin University(Earth Science Edition), 2013, 43(6): 1980-1986.
[6] JIANG Chuan-dong, LIN Jun, QIN Sheng-wu, LI Shan-shan, DUAN Qing-ming. Experiment on Dam Leakage Detection with Magnetic Resonance Sounding [J]. J4, 2012, 42(3): 858-863.
[7] LIU Li, LIU Na, ZHOU Bing, ZHAO Shuang, MENG Fan-qi, JIANG Long. Petrological Recording of Mantle-Magmatic CO2 Leakage on a Large-Scale in Honggang Anticline, Southern Songliao Basin [J]. J4, 2011, 41(2): 411-420.
[8] ZHANG Yong-guang, PENG Jian-ming, LIU He, YIN Qi-Lei, FAN Li-ming. Buffering the Backward Impact of Piston of Liquid-Jet Hammer [J]. J4, 2010, 40(6): 1415-1418.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!