吉林大学学报(工学版) ›› 2010, Vol. 40 ›› Issue (05): 1268-1272.

• 论文 • 上一篇    下一篇

压电式胎压报警器供电装置的发电特性

闫世伟, 杨志刚, 菅新乐   

  1. 吉林大学 机械科学与工程学院|长春 130022
  • 收稿日期:2009-05-13 出版日期:2010-09-01 发布日期:2010-09-01
  • 通讯作者: 杨志刚(1956-),男,教授,博士生导师.研究方向:压电驱动与控制技术.E-mail:yzg@jlu.cdu.cn E-mail:yzg@jlu.cdu.cn
  • 作者简介:闫世伟(1981-),男,博士研究生.研究方向:压电驱动与控制技术.E-mail:yanshiwei_2000@sohu.com
  • 基金资助:

    吉林省科技发展计划项目(20050316-2)

Power performance of a piezoelectric generator for tire pressure monitoring sensor

 YAN Shi-wei, YANG Zhi-gang, JIAN Xin-le   

  1. College of Mechanical Science and Engineering,Jilin University,Changchun 130022, China
  • Received:2009-05-13 Online:2010-09-01 Published:2010-09-01

摘要:

提出利用压电发电装置替代电池为胎压报警器提供实时电能。根据胎压报警器结构特点,提出将压电发电装置安装在车轮轮毂上,利用车轮转动中的振动来发电的方案。通过试验的方法研究了压电振子在轮毂上不同安装方式下的发电特性。试验结果表明,在既垂直于轮毂又垂直于车轮滚动方向的安装方式下,压电振子可以有效克服离心力的影响并吸收来自车轮所在平面多个方向的振动,压电发电装置发电效果较佳,适合为胎压报警器供电。利用4片45 mm×15 mm×0.2 mm的悬臂梁型压电振子并联为胎压报警器供电,其产生的能量能够满足胎压报警器的工作要求。

关键词: 仪器仪表技术, 轮毂, 发电装置, 胎压报警器, 供电

Abstract:

A piezoelectric power generator was proposed to supply realtime electric energy to the tire pressure monitoring sensor(TPMS). According to the structural feature of TPMS, a scheme was suggested in which the generator is fixed to the wheel hub and generates the electric energy using the vibration energy during the wheel rotation. The power performance of the generator under different installations of the cantilever beam piezoelectric vibrator was investigated experimentally. The results show that the installation of vibrator vertical to the wheel hub as well as to the wheel rolling direction is the best, it can avoid the impact of the centrifugal force, make use of the energy of the multidirectional vibrations in the plane of wheel. Thus installed generator with 4×45 mm×15 mm×0.2 mm  cantilever beam piezoelectric vibrators connected in parallel can satisfy the power demand by TPMS.

Key words: technology of instrument and meter, wheel hub;electrical generator, tire pressure monitoring sensor(TPMS), power supply

中图分类号: 

  • TH703
[1] 何仁,杨柳,胡东海. 冷藏运输车太阳能辅助供电制冷系统设计及分析[J]. 吉林大学学报(工学版), 2018, 48(6): 1645-1652.
[2] 仇艳凯, 李宝仁, 杨钢, 曹博, 刘真. 新型液压消声器吸收液压系统压力脉动的机理和特性[J]. 吉林大学学报(工学版), 2018, 48(4): 1085-1091.
[3] 吴疆, 徐壮, 刘丽佳, 嵇艳鞠, 李肃义. 基于环绕式血氧探头的睡眠呼吸暂停综合征检测装置原型设计与开发[J]. 吉林大学学报(工学版), 2018, 48(2): 640-644.
[4] 曾小华, 李广含, 宋大凤, 李胜, 朱志成. 轮毂液压混合动力商用车主动防侧翻控制[J]. 吉林大学学报(工学版), 2018, 48(1): 1-10.
[5] 杨诚, 宋萍, 彭文家, 金昊龙, 潘志强. 基于混合总线的装甲车辆实车综合测试系统设计[J]. 吉林大学学报(工学版), 2018, 48(1): 186-198.
[6] 杨诚, 宋萍, 彭文家, 邓高寿, 刘雄军. 装甲车辆综合测试系统上位机平台设计[J]. 吉林大学学报(工学版), 2017, 47(6): 1796-1803.
[7] 柏德恩, 全齐全, 李贺, 陈雅文, 邓宗全. 伺服加载的谐波减速器启动力矩测试系统[J]. 吉林大学学报(工学版), 2017, 47(6): 1804-1810.
[8] 王天皓, 王忠福, 王雨蒙, 杨开宇, 高印寒, 马喜来. 基于混沌多项式展开法的线束串扰统计模型[J]. 吉林大学学报(工学版), 2017, 47(5): 1568-1576.
[9] 曾小华, 李文远, 宋大凤, 李高志, 冯涛. 重型商用车辆轮毂液驱系统的驱动特性[J]. 吉林大学学报(工学版), 2017, 47(4): 1009-1016.
[10] 陈赫, 杨智君, 吴昭春, 冯志刚, 赵科佳, 李抵非, 田地. 标准失真模拟分量视频信号源及其校准方法[J]. 吉林大学学报(工学版), 2017, 47(4): 1159-1164.
[11] 刘晓为, 李海, 翁睿, 张海峰, 赵军. 应用静电力矩改善新型转子式陀螺的动态特性[J]. 吉林大学学报(工学版), 2017, 47(3): 850-854.
[12] 林君, 赵越, 蒋川东, 王应吉. 基于优化Block反演的地面磁共振测深新方法[J]. 吉林大学学报(工学版), 2017, 47(2): 530-539.
[13] 张飞, 单忠德, 任永新, 聂军刚, 刘丰. 缸盖缺陷检测系统线阵相机现场标定方法[J]. 吉林大学学报(工学版), 2017, 47(2): 540-545.
[14] 訚耀保, 原佳阳, 傅俊勇. 先导阀前腔串加阻尼孔的新型双级溢流阀特性[J]. 吉林大学学报(工学版), 2017, 47(1): 129-136.
[15] 林君, 杨宇, 胡雪岩, 王世隆. 基于感性负载的瞬变电磁发射波形控制技术[J]. 吉林大学学报(工学版), 2016, 46(5): 1718-1724.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!