吉林大学学报(工学版) ›› 2011, Vol. 41 ›› Issue (01): 276-0281.

• 论文 • 上一篇    下一篇

串行RapidIO鲁棒性

张勇1,2,王勇1,2, 张平1,2   

  1. 1.北京邮电大学 无线新技术研究所|北京 100876; 2.北京邮电大学 泛网无线通信教育部重点实验室|北京 100876
  • 收稿日期:2009-03-20 出版日期:2011-01-01 发布日期:2011-01-01
  • 通讯作者: 张勇(1982-),男,博士研究生.研究方向:嵌入式系统互连.E-mail:xiazibin@gmail.com E-mail:xiazibin@gmail.com
  • 作者简介:张勇(1982),男,博士研究生.研究方向:嵌入式系统互连.E-mail:xiazibin@gmail.com
  • 基金资助:

    “863”国家高技术研究发展计划项目(2006AA01Z283);国家自然科学基金重大项目(60772113).

Robustness of serial RapidIO system

ZHANG Yong1,2,WANG Yong1,2,ZHANG Ping1,2,   

  1. 1.Wireless Technology Innovation Institute,Beijing University of Posts and Telecommunication,Beijing 100876,China|2.Key Laboratory of Universal Wireless Communications, Ministry of Education, Beijing University of Posts and Telecommunication, Beijing 100876, China
  • Received:2009-03-20 Online:2011-01-01 Published:2011-01-01

摘要:

为克服串行RapidIO(Serial RapidIO, SRIO)互连系统中由于硬件实现的失误和恶劣环境造成的大量噪声与电磁干扰(Electromagnetic interference, EMI),提出了作为现有SRIO规范扩展的鲁棒传输协议(Robust transport protocol, ROTP)。ROTP用速率转换和模式转换提高SRIO性能。速率转换可提高恶劣环境下的系统平均吞吐量,模式转换可有效减少对反馈信道的使用。仿真与分析表明,ROTP方法可有效增强SRIO在恶劣环境下的鲁棒性,提高系统性能。

关键词: 通信技术, 鲁棒性, 鲁棒传输协议, 串行RapidIO, 速率状态, 工作模式

Abstract:

The noise and Electromagnetic Interference (EMI) in Serial RapidIO (SRIO) interconnect are generated by unavoidable errors of hardware implementation and tough environment. To combat these noise and EMI, a Robust Transport Protocol (ROTP) was proposed as an extension to existing SRIO specification. The main ideas of ROTP include speed transition and mode conversion. Speed transition can improve the average throughput in high Bit Error Rate (BER) environment. Mode conversion is to conquer frequent usage of feedback channel. Simulation and analysis prove that ROTP can effectively enhance the robustness of the SRIO interconnect and improve the system performance in a poor working environment.

Key words: communication, robustness\robust transport protocol, serial RapidIO, speed state, mode of operation

中图分类号: 

  • TN91
[1] 周彦果,张海林,陈瑞瑞,周韬. 协作网络中采用双层博弈的资源分配方案[J]. 吉林大学学报(工学版), 2018, 48(6): 1879-1886.
[2] 孙晓颖, 扈泽正, 杨锦鹏. 基于分层贝叶斯网络的车辆发动机系统电磁脉冲敏感度评估[J]. 吉林大学学报(工学版), 2018, 48(4): 1254-1264.
[3] 董颖, 崔梦瑶, 吴昊, 王雨后. 基于能量预测的分簇可充电无线传感器网络充电调度[J]. 吉林大学学报(工学版), 2018, 48(4): 1265-1273.
[4] 牟宗磊, 宋萍, 翟亚宇, 陈晓笑. 分布式测试系统同步触发脉冲传输时延的高精度测量方法[J]. 吉林大学学报(工学版), 2018, 48(4): 1274-1281.
[5] 丁宁, 常玉春, 赵健博, 王超, 杨小天. 基于USB 3.0的高速CMOS图像传感器数据采集系统[J]. 吉林大学学报(工学版), 2018, 48(4): 1298-1304.
[6] 陈瑞瑞, 张海林. 三维毫米波通信系统的性能分析[J]. 吉林大学学报(工学版), 2018, 48(2): 605-609.
[7] 张超逸, 李金海, 阎跃鹏. 双门限唐检测改进算法[J]. 吉林大学学报(工学版), 2018, 48(2): 610-617.
[8] 关济实, 石要武, 邱建文, 单泽彪, 史红伟. α稳定分布特征指数估计算法[J]. 吉林大学学报(工学版), 2018, 48(2): 618-624.
[9] 李炜, 李亚洁. 基于离散事件触发通信机制的非均匀传输网络化控制系统故障调节与通信满意协同设计[J]. 吉林大学学报(工学版), 2018, 48(1): 245-258.
[10] 孙晓颖, 王震, 杨锦鹏, 扈泽正, 陈建. 基于贝叶斯网络的电子节气门电磁敏感度评估[J]. 吉林大学学报(工学版), 2018, 48(1): 281-289.
[11] 武伟, 王世刚, 赵岩, 韦健, 钟诚. 蜂窝式立体元图像阵列的生成[J]. 吉林大学学报(工学版), 2018, 48(1): 290-294.
[12] 袁建国, 张锡若, 邱飘玉, 王永, 庞宇, 林金朝. OFDM系统中利用循环前缀的非迭代相位噪声抑制算法[J]. 吉林大学学报(工学版), 2018, 48(1): 295-300.
[13] 王金鹏, 曹帆, 贺晓阳, 邹念育. 基于多址干扰和蜂窝间互扰分布的多载波系统联合接收方法[J]. 吉林大学学报(工学版), 2018, 48(1): 301-305.
[14] 石文孝, 孙浩然, 王少博. 无线Mesh网络信道分配与路由度量联合优化算法[J]. 吉林大学学报(工学版), 2017, 47(6): 1918-1925.
[15] 姜来为, 沙学军, 吴宣利, 张乃通. LTE-A异构网络中新的用户选择接入和资源分配联合方法[J]. 吉林大学学报(工学版), 2017, 47(6): 1926-1932.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!