吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (增刊1): 11-15.

• 论文 • 上一篇    下一篇

岩石三维图像重建算法分析

方莹莹1,2, 滕奇志1,2, 何小海1,2, 杨晓敏1,2, 李征骥1,2   

  1. 1. 四川大学 电子信息学院,成都 610064;
    2. 四川大学 图像信息研究所,成都 610064
  • 收稿日期:2012-05-25 发布日期:2013-06-01
  • 作者简介:方莹莹(1989-),女,硕士研究生.研究方向:计算机应用与图像处理.E-mail:xiaoxiaoyingff@163.com
  • 基金资助:

    国家自然科学基金项目(60972130).

Analysis for three-dimensional reconstruction technique of sandstone

FANG Ying-ying1,2, TENG Qi-zhi1,2, HE Xiao-hai1,2, YANG Xiao-min1,2, LI Zheng-ji1,2   

  1. 1. School of Electronics and Information Engineering, Sichuan University, Chengdu 610064, China;
    2. Image Information Institute, Sichuan University, Chengdu 610064, China
  • Received:2012-05-25 Published:2013-06-01

摘要:

对模拟退火重建算法、基于快速傅里叶变换的高斯域截断重建算法以及基于多点地质统计的重建算法的重建过程进行简单描述,并针对三类重建算法造成重建结果误差的原因进行了原理性的分析和讨论。最后,采用能够表达岩石微观结构特性的分析函数,分析比较三类重建算法结果与真实岩心的形态结构、微观特性差异,给出综合性评价。

关键词: 三维重建, 模拟退火, 快速傅里叶变换, 多点地质统计, 孔隙参数, 特征函数

Abstract:

Three methods of three-dimensional reconstruction technique were aralyzed and discussed.First,the process of Simulated Annealing(SA),the Fast Fourier Transform(FFT),Muti-Point Statistics(MPS) were introduced.Then,the differences of the three methods were analysized.Finally,according to pore parameter and characteristic functions,the results of various reconstruction algorithms with the real rock structure were compared, and the final analyzing results were given.

Key words: three-dimensional reconstruction, simulated annealing, fast fourier transform, muti-point statistics, pore parameter, characteristic functions

中图分类号: 

  • TP751.1

[1] Kwiecien M J,Macdonald I F,Dullien F A L.Three-dimensional reconstruction of porous media from serial section data[J].Journal of Microscopy,2011,159(3):343-359.

[2] 唐棠.基于二维图像的砂岩结构三.维重建及特性分析[M].成都:四川大学,2009. Tang Tang.Three-dimensional reconstruction and characterization of sandstone microstructure from two-dimensional images [M].Chendu:Sichuan University,2009.

[3] Liang Z R,Fernandes C P,Magnani F S,et al.A reconstruction technique for three-dimensional porous media using image analysis and Fourier transforms[J].Journal of Petroleum Science and Engineering,1998,21(3-4):273-283.

[4] De Castro Martins. Image reconstruction using interval simulated annealing in electrical impedance tomography[J].IEEE Engineering in Medicine and Biology Society,2012,59(7):1861-1870.

[5] 张挺.基于多点地质统计的多孔介质重构方法及实现[M].合肥:中国科学技术大学,2009.

[6] BurcArpat G,Jef Caers.Conditional simulation with patterns[J].Mathematical Geology,2007,39:2177-203.

[7] Hiroshi Okabe,Martin J Blunt.Pore spac reconstruction using multiple point statistics[J].Journal of Petroleum Sisticscience and Engineering,2005,46(1-2):121-137.

[8] 黄丰.多孔介质模型的三维重构研究[M].合肥:中国科学技术大学,2009.

[9] Jing Hu,Piet Stroeven.Local porosity analysis of pore structure in cement paste[J].Cement and ConcreteResearch.2005,35(2):233-242.

[1] 代存杰,李引珍,马昌喜,柴获,牟海波. 不确定条件下危险品配送路线多准则优化[J]. 吉林大学学报(工学版), 2018, 48(6): 1694-1702.
[2] 林金花, 王延杰, 王璐, 姚禹. 全局相机姿态优化下的快速表面重建[J]. 吉林大学学报(工学版), 2018, 48(3): 909-918.
[3] 林欣堂, 李艳东, 吴攀超. 新的闭式通用浮雕变换解算法在三维表面检测中的应用[J]. 吉林大学学报(工学版), 2015, 45(6): 1987-1993.
[4] 李晖晖, 滑立, 杨宁, 刘坤. 基于MSA特征和模拟退火优化的遥感图像多目标关联算法[J]. 吉林大学学报(工学版), 2015, 45(4): 1353-1359.
[5] 何凯, 朱程涛, 姚静娴. 基于双权重聚合的立体匹配算法[J]. 吉林大学学报(工学版), 2015, 45(4): 1318-1323.
[6] 韩啸,刘淑芬,徐天琦. 基于遗传模拟退火算法的改进K-medoids算法[J]. 吉林大学学报(工学版), 2015, 45(2): 619-623.
[7] 何凯, 穆星, 邹刚. 基于图像分割的三维立体匹配改进算法[J]. 吉林大学学报(工学版), 2014, 44(01): 219-224.
[8] 刘逻, 郭立红, 肖辉, 王建军, 王改革. 基于结合模拟退火算法的动态模糊神经网络的软件可靠性增长模型[J]. , 2012, 42(05): 1225-1230.
[9] 高黎黎, 卢韶芳, 郭富强, 张超. 高密度组合结构光编码方法[J]. 吉林大学学报(工学版), 2011, 41(增刊1): 344-347.
[10] 李玉庆,徐敏强,王日新 . 三轴稳定卫星点目标观测任务优化调度技术[J]. 吉林大学学报(工学版), 2008, 38(06): 1447-1451.
[11] 李宝林;李志蜀;金虎;孙继荣;陈艳红 . 基于R_N(K)准则的测试用例生成技术[J]. 吉林大学学报(工学版), 2008, 38(03): 680-0684.
[12] 赵伟;李文辉;夏云飞 . 基于非线性规划的凸多面体间碰撞检测算法[J]. 吉林大学学报(工学版), 2008, 38(03): 676-0679.
[13] 寇晓丽,刘三阳 . 基于模拟退火的粒子群算法求解约束优化问题[J]. 吉林大学学报(工学版), 2007, 37(01): 136-140.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!