吉林大学学报(工学版) ›› 2020, Vol. 50 ›› Issue (2): 631-640.doi: 10.13229/j.cnki.jdxbgxb20181285

• 交通运输工程·土木工程 • 上一篇    

高预紧力后张法全长锚固支护力学分析

陶文斌1(),侯俊领2(),陈铁林1,唐彬3   

  1. 1.北京交通大学 土木建筑工程学院，北京 100044
    2.安徽理工大学 能源与安全学院，安徽 淮南 232001
    3.安徽理工大学 土木建筑学院，安徽 淮南 232001
  • 收稿日期:2018-12-29 出版日期:2020-03-01 发布日期:2020-03-08
  • 通讯作者: 侯俊领 E-mail:taowenbin0963@sina.com;13956408171@139.com
  • 作者简介:陶文斌（1991-），男，博士研究生.研究方向：隧道锚杆支护设计.E-mail:taowenbin0963@sina.com
  • 基金资助:
    国家重点研发计划项目(2017YFC0805400);国家自然科学基金项目(51804006)

Mechanical analysis of full⁃length anchorage with high pretension post⁃tensioning method

Wen-bin TAO1(),Jun-ling HOU2(),Tie-lin CHEN1,Bin TANG3   

  1. 1.School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China
    2.School of Energy and Safety, Anhui University of Science and Technology, Huainan 232001, China
    3.School of Civil Engineering and Architeture, Anhui University of Science and Technology, Huainan 232001, China
  • Received:2018-12-29 Online:2020-03-01 Published:2020-03-08
  • Contact: Jun-ling HOU E-mail:taowenbin0963@sina.com;13956408171@139.com

RICH HTML

 12   

PDF (PC)

195

摘要：

针对深部巷道采用加长或全长锚固锚杆支护时，锚杆的锚固段整体受力不均、抗剪切承载能力低以及无法适应其大变形等问题，提出了高预紧力后张法全长锚固支护方法，通过建立高预紧力后张法全长锚固支护力学模型，对高预紧力后张法全长锚固支护的受力特征和支护围岩承载能力进行了理论计算和现场应用分析，并与传统加长、全长锚固支护方法进行了对比。研究结果表明：高预紧力后张法全长锚固支护方法具有高预应力支护与全长锚固支护的优点,在全长锚固的基础上使预高于金立紧力向围岩内传递，与传统加长、全长锚固支护方法相比，高预紧力后张法全长锚固支护方法锚固段的剪应力分布更加平缓；有利于锚杆预紧力在围压中扩散，增大围岩压应力区范围，改善锚固围岩特性；配套采用研发的高预紧力减摩托盘提高锚杆预紧力，可形成更有效的锚固围岩承载结构。

关键词: 岩土工程, 高预紧力, 全长锚固, 后张法, 高预紧力托盘, 围岩承载结构

Abstract:

To solve the problems of uneven overall force, low shear bearing capacity and inadaptability to large deformation of anchor bolt in deep roadway supported by lengthened or full-length anchor bolt, a Full-length Anchorage (FLA) support method with High Pretension Post-tensioning (HP-PT) is proposed in this paper. By establishing the mechanical model of FLA support with HP-PT method, the mechanical characteristics and bearing capacity of the anchorage section of FLA support with HP-PT method are calculated and analyzed theoretically, and compared with the traditional lengthened and FLA support method. The results show that the FLA support with HP-PT method has the advantages of both high pretension support and FLA support. Compared with the traditional lengthening and support method, the FLA with HP-PT support method makes the distribution of shear stress more gentle; it is conducive to the diffusion of pre-tightening force in confining pressure, enlarges the range of compressive stress zone of surrounding rock, improves the characteristics of anchored surrounding rock; and using high Pre-tightening Force pallet can form a more effective supporting structure of anchored surrounding rock.

Key words: geotechnical engineering, high preload, full-length anchorage, post tension method, high pre-tightening force pallet, structure of surrounding rock

中图分类号: 

  • TD353

图1

加长锚固锚杆受力示意图"

图2

全长锚固锚杆受力示意图"

图3

快速树脂锚固体受力示意图"

图4

锚固微单元体"

图5

高预紧力后张法全长锚固受力示意图"

图6

锚固体界面剪应力分布"

图7

锚杆轴力分布"

图8

传统滚珠托盘与高预紧力减摩托盘"

图9

预紧力转化曲线"

图10

高预紧力减摩托盘装配示意图"

图11

巷道顶板下沉量变化曲线"

1 康红普, 范明建, 高富强, 等. 超千米深井巷道围岩变形特征与支护技术[J]. 岩石力学与工程学报, 2015, 34(11): 2227-2241.
Kang Hong-pu, Fan Ming-jian, Gao Fu-qiang, et al. Deformation and support of rock roadway at depth more than 1 000 meters[J]. Chinese Journal of Rock Mechanics and Engineering, 2015, 34(11): 2227-2241.
2 袁亮, 薛俊华, 刘泉声, 等. 煤矿深部岩巷围岩控制理论与支护技术[J]. 煤炭学报, 2011, 36(4): 535-543.
Yuan Liang, Xue Jun-hua, Liu Quan-sheng, et al. Surrounding rock stability control theory and support technique in deep rock roadway for coal mine[J]. Journal of China Coal Society, 2011, 36(4): 535-543.
3 刘泉声, 刘恺德. 淮南矿区深部地应力场特征研究[J]. 岩土力学, 2012, 33(7): 2089-2096.
Liu Quan-sheng, Liu Kai-de. Characteristics of in-situ stress field for deep levels in Huainan coal mine[J]. Rock and Soil Mechanics, 2012, 33(7): 2089 -2096.
4 谢广祥, 李传明, 王磊. 巷道围岩应力壳力学特征与工程实践[J]. 煤炭学报, 2016, 41(12): 2986-2992.
Xie Guang-xiang, Li Chuan-ming, Wang Lei. Mechanical characteristics and practical application on stress shell of roadway surrounding rock［J］. Journal of China Coal Society, 2016, 41(12): 2986-2992.
5 常聚才, 谢广祥. 深部巷道围岩力学特征及其稳定性控制[J]. 煤炭学报, 2009, 34(7): 881-886.
Chang Ju-cai, Xie Guang-xiang. Mechanical charactristics and stability control of rock roadway surrounding rock in deep mine[J]. Journal of China Coal Society, 2009, 34(7): 881-886.
6 陈浩, 任伟中, 李丹, 等. 深埋隧道锚杆支护作用的数值模拟与模型试验研究[J]. 岩土力学, 2011, 32(增刊1): 719-724, 786.
Chen Hao, Ren Wei-zhong, Li Dan, et al. Numerical simulation and model test study of mechanismof bolt in deep tunnel[J]. Rock and Soil Mechanics, 2011, 32(Sup.1): 719-724, 786.
7 康红普, 姜鹏飞, 蔡嘉芳. 锚杆支护应力场测试与分析[J]. 煤炭学报, 2014, 39(8): 1521-1529.
Kang Hong-pu, Jiang Peng-fei, Cai Jia-fang. Test and analysis on stress field caused by rock bolting [J]. Journal of China Coal Society, 2014, 39(8): 1521-1529.
8 徐佑林, 康红普. 高预应力锚杆支护对煤与瓦斯突出控制作用研究[J]. 煤炭学报, 2013, 38(7): 1168-1173.
Xu You-lin, Kang Hong-pu. The study on control coal and gas outburst with high prestress rock bolting[J]. Journal of China Coal Society, 2013, 38(7): 1168-1173.
9 张农, 李桂臣, 阚甲广. 煤巷顶板软弱夹层层位对锚杆支护结构稳定性影响[J]. 岩土力学, 2011, 32(9): 2753-2758.
Zhang Nong, Li Gui-chen, Kan Jia-guang. Influence of soft interlayer location in coal roof on stability of roadway bolting structure[J]. Rock and Soil Mechanics, 2011, 32(9): 2753-2758.
10 赵一鸣, 张农, 郑西贵, 等. 千米深井厚硬顶板直覆沿空留巷围岩结构优化[J]. 采矿与安全工程学报, 2015, 32(5): 714-720.
Zhao Yi-ming, Zhang Nong, Zheng Xi-gui, et al. Structural optimization of overlying strata for gob-side entry retaining in 1000 m deep mine with direct thick and hard roof[J]. Journal of Mining & Safety Engineering, 2015, 32(5): 714-720.
11 许兴亮, 张农, 李桂臣, 等. 巷道覆岩关键岩梁与预应力承载结构力学效应[J]. 中国矿业大学学报, 2008, 37(4): 560-564.
Xu Xing-liang, Zhang Nong, Li Gui-chen, et al. Mechanical properties of the key rock beam and pre-stressed load-bearing frame covering roadway[J]. Journal of China University of Mining & Technology, 2008, 37(4): 560-564.
12 周辉, 徐荣超, 张传庆, 等. 预应力锚杆内锚固段长度效应研究[J]. 岩土力学, 2015, 36(9): 2688-2694.
Zhou Hui, Xu Rong-chao, Zhang Chuan-qing, et al. Research on effect of interior bonding section length of prestressed anchor rod[J]. Rock and Soil Mechanics, 2015, 36(9): 2688-2694.
13 尤春安, 战玉宝. 预应力锚索锚固段的应力分布规律及分析[J]. 岩石力学与工程学报, 2005, 24(6): 925-928.
You Chun-an，Zhan Yu-bao. Distributing characters and analysis of stresses in prestressed cables[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(6): 925-928.
14 姚显春, 李宁, 陈蕴生. 隧洞中全长粘结式锚杆的受力分析[J]. 岩石力学与工程学报, 2005, 24(13): 2272-2276.
Yao Xian-chun, Li Ning, Chen Yun-sheng. Theoretical solution for shear stresses on interface of fully grouted bolt in tunnels[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(13): 2272-2276.
15 李桂臣, 孙辉, 张农, 等. 中空注浆锚索周边剪应力分布规律研究[J]. 岩石力学与工程学报, 2014, 33(增刊2): 3856-3864.
Li Gui-chen, Sun Hui, Zhang Nong, et al. An investigation into shear stress distribution around hollow grouting anchor cables[J]. Chinese Journal of Rock Mechanics and Engineering, 2014, 33(Sup.2): 3856-3864.
16 王洪涛, 王琦, 王富奇, 等. 不同锚固长度下巷道锚杆力学效应分析及应用[J]. 煤炭学报, 2015, 40(3): 509-515.
Wang Hong-tao, Wang Qi, Wang Fu-qi, et al. Mechanical effect analysis of bolts in roadway under different anchoring lengths and its application[J]. Journal of China Coal Society, 2015, 40(3): 509-515．
17 万世成, 黄侨, 关健, 等. 预应力碳纤维板加固钢-混凝土组合连续梁负弯矩区试验[J]. 吉林大学学报: 工学版, 2019, 49(4): 1114-1123.
Wan Shi-cheng, Huang Qiao, Guan Jian, et al. Strengthening of continuous steel-concrete composite beams in negative moment region using prestressed carbon fiber-reinforced polymer plates[J]. Journal of Jilin University (Engineering and Technology Edition), 2019, 49(4): 1114-1123.
18 孙正, 黄钰期, 俞小莉. 径向滑动轴承润滑油膜流动-传热过程仿真[J]. 吉林大学学报: 工学版, 2018, 48(3): 744-751.
Sun Zheng, Huang Yu-qi, Yu Xiao-li. Numerical simulation of flow and heat transfer in journal bearing lubrication[J]. Journal of Jilin University (Engineering and Technology Edition), 2018, 48(3): 744-751.
[1] 高登辉,邢义川,郭敏霞,张爱军,王献涛,马保红. 非饱和重塑黄土⁃混凝土接触面修正双曲线模型[J]. 吉林大学学报(工学版), 2020, 50(1): 156-164.
[2] 古海东,罗春红. 疏排桩-土钉墙组合支护基坑土拱效应模型试验[J]. 吉林大学学报(工学版), 2018, 48(6): 1712-1724.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
版权所有 © 《吉林大学学报(工学版)》编辑部
地址：长春市人民大街5988号　电话：+86-431-85095297　传真：+86-431-85094074　E-mail: xbgxb@jlu.edu.cn
本系统由北京玛格泰克科技发展有限公司设计开发