Journal of Jilin University(Engineering and Technology Edition) ›› 2021, Vol. 51 ›› Issue (3): 866-874.doi: 10.13229/j.cnki.jdxbgxb20200542

Previous Articles     Next Articles

Rock fragmentation characteristics of double impregnated diamond bits with self⁃balancing reverse rotation

Ke GAO1(),Hang-kai CHEN1,Xiao-hui XU1,Hong-tong GAO2,Xiao-bo XIE1(),Li-peng YAN3   

  1. 1.College of Construction Engineering，Jilin University，Changchun 130021，China
    2.Xi'an Research Institute Co. , Ltd. , China Coal Technology and Engineering Group Corp，Xi'an 710077，China
    3.Nuclear Industry Brigade 208，Baotou 014010，China
  • Received:2020-07-17 Online:2021-05-01 Published:2021-05-07
  • Contact: Xiao-bo XIE E-mail:gaokenm@jlu.edu.cn;xiexiaobo@jlu.edu.cn

RICH HTML

 1   

PDF (PC)

255

Abstract:

In order to reveal the characteristics of rock breaking process with double bits' self-balancing and synchronous reverse rotation. In this paper， through theoretical calculation， numerical simulation and hole wall morphology analysis， the rock fragmentation characteristics of dual impregnated diamond bit and single impregnated diamond bit are compared and studied. The simulation data show that show that that the double bits present bidirectional small step double screw drilling at the bottom of the hole， while the single bit presents unidirectional small step spiral drilling； due to the reverse rotation of the inner and outer bits of the double impregnated diamond bit， the rock fragmentation characteristics of the single impregnated diamond bit are compared The experiment data show that the torque balance effect on the bottom rock is smaller， the disturbance to the formation is weaker， and the hole wall is more smooth and stable； the double bit produces more stress concentration points for the rock at the bottom of the hole， the maximum stress value is 114.7% of the single bit， and the axial displacement is 121.7% of the single bit， which indicates that the double bit is more likely to break the rock. The research results provide theoretical support for the research of double bit self balanced drilling.

Key words: impregnated diamond bit, self-balancing, double bits, rock fragmentation characteristics, reverse rotation

CLC Number: 

  • TE921

Fig.1

Schematic diagram of local stress of rock cutting with single tooth of single and double bit"

Table 1

Basic rock parameters"

参数数值参数数值
岩石的剪切模量G/MPa28 700岩石破碎体积压力Pc/MPa16
岩石的内聚强度A0.79

岩石破碎体积

应变μc

0.001
岩石的压力硬化系数B1.6

压实体积压力

Pl/MPa

800
岩石的应变率系数C0.007压实体积应变μl0.1
压力硬化指数N0.61损伤度D10.04
岩石静态抗压强度fc/MPa102损伤度D21
拉伸应力T/MPa4

材料常数K1/

（104 MPa）

8.5
卸载比例系数Fs0.06

材料常数K2/

（105 MPa）

-1.71
岩石损伤常数Efmin0.01

材料常数K3/

（105 MPa）

2.08
最大无量纲强度Sfmax7岩石初始密度ρ0/(kg·m-3)2700

Table 2

Basic parameters of bit material"

材料弹性模量/MPa泊松比密度/(kg·m-3)
钻头刚体2 0700.37 830
钻头切削齿105 0000.23 520

Fig.2

Model of the bit"

Fig.3

Model of bit mesh"

Fig.4

Single bit stress and failure pattern of rockat the bottom of borehole"

Fig.5

Double bits tress and failure pattern of rockat the bottom of borehole"

Fig.6

Force distribution of bit"

Fig.7

Force distribution of bit"

Table 3

Comparison of maximum Mises stress of single and double bit at different times"

钻头类型时间/s
0.010.030.050.070.09平均
单钻头164.5188.3170.1195.3192.4182.1
双钻头200.3190.4221.7195.1236.8208.9

Fig.8

Time history plot of single bit anddouble bit along Z-axis direction"

Table 4

Materials of heterogeneous rock samples"

名称作用成分
水泥粘结剂复合硅酸盐水泥
石块骨架材料河卵石、砾石、花岗岩石块等
沙子骨架材料普通沙子
建筑速溶胶辅助剂-

Fig.9

Artificial rock sample"

Fig.10

Single bit and double bits"

Fig.11

Wear morphology of single and double bit"

Table 4

Single and double bit drilling test data"

钻头类型进尺/mm纯钻进时间/s钻速/(mm·s-1)
单钻头107621960.49
双钻头103718190.57

Fig.12

Comparison of ROP of single bit and double bit under the same drilling parameters"

Fig.13

Macro morphology of borehole wall ofsingle and double bit drilling"

Fig.14

Micro morphology of borehole wall ofsingle and double bit drilling"

1 张祖培. 碎岩工程学[M]. 北京:地质出版社,2004.
2 陶兴华. 冲击旋转钻井破岩特点分析[J]. 钻采工艺,1996(3):1-3.
Tao Xing-hua. Analysis on rock breaking characteristics of percussive rotary drilling[J]. Drilling & Production Technology,1996(3):1-3.
3 高科. 孕镶金刚石仿生钻头的研究[D]. 长春:吉林大学建设工程学院, 2006.
Gao Ke. Research on impregnatation diamond boinics bit[D]. Changchun: College of Construction Engineering, Jilin University, 2006.
4 高科,孙友宏,王治刚,等. 一种井下扭矩自平衡有缆钻具系统[P]. 中国:CN106761480A, 2017-05-31.
5 孙友宏,刘大军,高科,等. 新型耦合仿生孕镶金刚石石油钻头的研制[J]. 吉林大学学报:工学版,2013,43(6):1566-1573.
Sun You-hong, Liu Da-jun, Gao Ke, et al. Development of coupling bionics impregnated diamond bit[J]. Journal of Jilin University(Engineering and Technology Edition),2013,43(6):1566-1573.
6 高红通. 双向回转条件下钻头破岩过程分析与试验[D]. 长春:吉林大学建设工程学院,2019.
Gao Hong-tong. Analysis and experiment of breaking rock process under two-way rotary condition[D]. Changchun: College of Construction Engineering, Jilin University, 2019.
7 Pryhorovska T O,Chaplinskiy S S,Kudriavtsev I O. 聚晶金刚石钻头切削齿切削岩块过程的有限元模拟[J]. 石油勘探与开发,2015,42(6):812-816.
Pryhorovska T O,Chaplinskiy S S, Kudriavtscv l O. Finite element modelling of rock mass cutting by cutters for PDC drill bits[J]. Petroleum Exploration and Development, 2015,42(6):812-816.
8 孙荣军,谷拴成,居培,等. 基于有限元分析的煤矿井下新型弧角型聚晶金刚石复合片钻头优化设计[J]. 吉林大学学报:工学版,2017,47(6):1991-1998.
Sun Rong-jun, Gu Shuan-cheng, Ju Pei, et al. Optimal design of new arc angle PDC drill bit for coal mining based on finite element method[J]. Journal of Jilin University(Engineering and Technology Edition), 2017,47(6):1991-1998.
9 Feng Y, Arlanoglu C, Podnos E, et al. Finite-element studies of hoop-stress enhancement for wellbore strengthening[J]. SPE Drilling & Completion, 2015, 30(1):38-51.
10 祝效华,李海. PDC切削齿破岩效率数值模拟研究[J]. 应用基础与工程科学学报,2015,23(1):182-191.
Zhu Xiao-hua, Li Hai. Numerical simulation on mechanical special energy of PDC cutter rock-cutting[J]. Journal of Basic Science and Engineering, 2015,23(1):182-191.
11 赵伏军,李夕兵,冯涛,等. 动静载荷耦合作用下岩石破碎理论分析及实验研究[J]. 岩石力学与工程学报, 2005, 24(8):1315-1320.
Zhao Fu-jun, Li Xi-bing, Feng Tao, Theoretical analysis and experiments of rock fragmentation under coupling dynamic and static loads[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(8):1315-1320.
12 韦文杰,张绍和. 栅格胎体孕镶金刚石钻头的破岩机理分析[J]. 煤田地质与勘探,2017,45(5):180-185.
Wei Wen-jie, Zhang Shao-he. Analysis on rock fragmentation mechanism of impregnated diamond bit with grids matrix[J]. Coal Geology & Exploration, 2017,45(5):180-185.
13 Johnson K L. Contact Mechanics[M]. England:Cambridge University Press, 1985.
14 徐小荷,余静.岩石破碎学[M]. 北京:煤炭工业出版社,1984.
15 李田军. PDC钻头破破岩石的力学分析与机理研究[D]. 武汉:中国地质大学工程学院,2012.
Li Tian-jun. Mechanical analysis and fragmentation mechanism of PDC bits drilling rock[D]. Wuhan:College of Engineering, China University of Geosciences, 2012.
[1] GAO Ke, SUN You-hong, REN Lu-quan, WANG Wen-long, XIE Xiao-bo, LV Yue-bin . Optimization design and test of nonsmooth ratio of bionics impregnated diamond bit [J]. 吉林大学学报(工学版), 2009, 39(03): 721-0725.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd