吉林大学学报(工学版) ›› 2012, Vol. 42 ›› Issue (增刊1): 484-488.

Previous Articles    

Efficiency measurement of mechanical production manufacturing process based on network DEA

SUN Xu1,2, LI Chong1, YANG Yin-sheng1, YANG Jun3   

  1. 1. Key Laboratory of Bionic Engineering of Ministry of Education, Jilin University, Changchun 130022, China;
    2. Jilin Technology College of Electronic Information, Jilin 132021, China;
    3. School of Reliability and Systems Engineering, Beihang University, Beijing 100191, China
  • Received:2012-03-03 Online:2012-09-01 Published:2012-09-01

PDF (PC)

640

Abstract: From four aspects of raw materials,equipment,personnel and error transmission factor, an index system of efficiency evaluation for mechanical production manufacturing process system was established, and it was used to evaluate similar 15 production lines of certain mechanical product using two-stage network DEA, which each production line is composed of two successive processing operations, each operation can be regarded as a subsystem of the line. According to the results of evaluations, the projection analysis were conducted on the error propagation coefficient and tolerances in the decision making units of low efficiency system, with decision making units of high efficiency as a reference. The results indicate that in the mechanical production manufacturing process, the best system efficiency and subsystem efficiency can be achieved only when the error propagation coefficient and tolerances are adjusted at the same time.

Key words: system engineering, mechanical products, production process, network DEA

CLC Number: 

  • TH122
[1] Fare R,Grosskopf S. Network DEA[J]. Socioecnomic Planning Sciences,2000,34(1):35-49.

[2] Fare R,Grabowski R,Grosskopf S,et al. Efficiency of a fixed but allocable input: a nonparametric approach[J]. Economics Letters, 1997,56:187-193.

[3] Lothgren M,Tambour M. Productivity and customer satisfaction in Swedish pharmacies: a DEA network model[J]. European Journal of Operational Research,1999,115:449-458.

[4] Yang Y S,Ma B J,Koike M. Efficiency-measuring DEA model for production system with k independent subsystems[J].Journal of the Operations Research Society of Japan,2000,43(3):343-354.

[5] Lewis H F, Sexton T R. Network DEA:efficiency analysis of organizations with complex internal structure[J]. Computers & Operations Research, 2004,31:1365-1410.

[6] Prieto A M, Zofío J L. Network DEA efficiency in input-out put models with an application to OECD countries[J]. European Journal of Operational Research,2007,178:292-304.

[7] Metzger L M. Measuring quality cost effects on Productivity using data envelope analysis[J]. Journal of Applied Business Research,1993,9(3):69-79.

[8] Golnay B,Haekman S T,Passy U. An efficiency measurement framework for multi-stage production systems[J]. Annals of Operations Research, 2006,145(1):51-68.

[9] 魏权龄,庞立永. 具有阶段最终产出的链式网络DEA模型[J]. 数学的实践与认识,2010,40(10):53-59. Wei Quan-Ling, Pang Li-Yong. The chain network with stages' final output DEA models[J]. Mathematics in Practice and Theory, 2010,40(10):53-59.

[10] 黄祎,葛虹,冯英浚. 基于链形系统的关联网络DEA模型:以我国14家商业银行为例[J]. 系统工程理论与实践,2009,29(5):106-114. Huang Yi,Ge Hong,Feng Ying-jun. Relational network DEA model based on series system:application of 14 commercial banks in China[J]. System Engineering-Theory&Practice,2009,29(5):106-114.

[11] 李凌,刘建永,付成群,等. 综合网络DEA模型有效性理论分析[J]. 系统工程学报,2010,28(1):53-57. Li Ling,Liu Jian-yong,Fu Cheng-qun,et al. Efficiency theory of generalized network DEA model[J]. Journal of Systems Engineering,2010,28(1):53-57.

[12] 刘军, 王灿,吕梁. 机械加工误差传递模型的建立与应用[J]. 机械与电子,2005,12:18-20. Liu Jun,Wang Can, Lyu Liang. Setting up and application of deviation transmission model for machining[J]. Machinery & Electronics,2005,12:18-20.

[13] 曹衍龙.面向制造环境的公差稳健设计方法与技术的研究. 杭州:浙江大学, 2003. Cao Yan-long. Study on the methodology and technology of robust tolerance design for manufacture. Hangzhou: Zhejiang University, 2003.

[14] 杨锋, 翟笃俊,梁樑,等. 两阶段链形系统生产可能集与DEA评价模型[J].系统工程学报,2010,25(6):401-406. Yang Feng,Zhai Du-jun,Liang ling,et al. Production possibility set and DEA evaluation model for two-stage series systems[J]. Journal of Systems Engineering,2010,25(6):401-406.
[1] XU Cheng, QU Zhao-wei, TAO Peng-fei. Estimation of bicycle path capacity under mixed bicycle traffic flow [J]. 吉林大学学报(工学版), 2016, 46(1): 63-69.
[2] WANG Zhong-yu, CAI Qing, WU Bing, LI Lin-bo. Queue length estimation for signalized intersections based on multi-source data [J]. 吉林大学学报(工学版), 2015, 45(4): 1088-1094.
[3] SHAO Min-hua, SUN Li-jun, SHAO Xian-zhi. Network location model of sensors and algorithm based on turning ratios [J]. 吉林大学学报(工学版), 2013, 43(06): 1476-1481.
[4] SUN Bao-feng, LUO Qing-yu, DU Yang, TAO Yan. Simulation and evaluation of order-to-delivery mode for automobile manufacture enterprise [J]. , 2012, 42(04): 904-909.
[5] JIA Hong-fei, CHEN Bin, LI Guo-wei, ZHANG Jing-shan. Collision avoidance method in pedestrian simulation based on blockade-angle [J]. 吉林大学学报(工学版), 2011, 41(6): 1577-1580.
[6] YU Zhen-zhong, YAN Ji-hong, ZHAO Jie, GAO Yong-sheng, CHEN Zhi-feng. 3CH time-delayed bilateral teleoperation using wave variable with prediction [J]. 吉林大学学报(工学版), 2011, 41(4): 1096-1101.
[7] JIANG Gui-Yan, ZHANG Wei, CHANG An-De. Data organization method for traffic information acquisition system based on GPSequipped floating vehicle [J]. 吉林大学学报(工学版), 2010, 40(02): 397-0401.
[8] CHEN Jun,MA LI-li,HU Ping,HOU Ji-na. Inventory-buffer and time-buffer control mechanism for remanufacturing system [J]. 吉林大学学报(工学版), 2009, 39(增刊2): 332-0336.
[9] WANG Xu，CHEN Yong-gang，YANG Yin-sheng . DEA-DA model with interval numbers and its sensitivity analysis [J]. 吉林大学学报(工学版), 2009, 39(03): 716-0720.
[10] Yang Yin-sheng;Sun Zhao-hua;Ma Ping;Tao Yue;Si Jin. T-S fuzzy system modeling based on hybrid of SOM and K-means [J]. 吉林大学学报(工学版), 2008, 38(03): 658-0661.
[11] Wang Xiao-lin, Wang Dan, Wang Gui-qin, Sun Zhi-yuan . Multi-objective decision-making of production organization in agile manufacture environment [J]. 吉林大学学报(工学版), 2008, 38(01): 89-93.
[12] Sun Bao-feng, Li Xing, Li Jian-hua, Hou Ji-na . Application of arena and system dynamics in the
field of supply chain simulation [J]. 吉林大学学报(工学版), 2006, 36(05): 829-0834.
[13] Wang Xiaoli,, Yang Zhaosheng ,Lü Xutao, Zhao Bingxuan. Shortest Path Algorithm Based on Limiting Parallelogram and Its Application in Traffic Networks [J]. 吉林大学学报(工学版), 2006, 36(01): 123-0127.
[14] Yu Dexin，Yang Zhaosheng，Wang Yuan，Sun Jianping. Urban Road Traffic Control System and Its Coordinate Optimization Based on MultiAgent System [J]. 吉林大学学报(工学版), 2006, 36(01): 113-0118.
[15] JI Changxu , YANG Nan , ZHOU Jianfeng. Data Management Techniques of Urban Integrated Traffic Information Platform [J]. 吉林大学学报(工学版), 2005, 35(06): 637-0640.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd