吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (2): 352-357.doi: 10.13229/j.cnki.jdxbgxb201502003

• Orignal Article • Previous Articles     Next Articles

Multi-objective optimization of vehicle ride dynamic behaviors

SONG Kang1,CHEN Xiao-kai1,LIN Yi2   

  1. 1.School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China;
    2.Beijing Automotive Technology Center, BAIC Motor Corporation Ltd., Beijing 101300, China
  • Received:2013-09-05 Online:2015-04-01 Published:2015-04-01

Abstract: A human-seat-suspension model with seven degrees-of-freedom was built on a 1/4 car model. The vertical acceleration, suspension work space and dynamic tire load were selected as the objective functions, and parameters of the suspension and seat cushion were selected as the design variables according to the results of parameter sensitivity analysis. Dimensionless method was introduced to make the optimization computation independent of the working conditions. Then a multi-objective optimization model was built to optimize the ride dynamic behavior of vehicle. Non-dominated Sorting Genetic Algorithm-II (NSGA-II) was employed for optimization computation and Pareto optimal set and Pareto frontier were obtained. Results show that seat cushion with small stiffness and large damping contributes to improve ride comfort without worsening other behaviors. In Pareto optimal set, the suspension stiffness is linearly directly proportional to suspension damping, which decides that optimal ride comfort and suspension work space can not be obtained simultaneously. Tire stiffness can be approximately determined based on dynamic tire load.

CLC Number: 

  • U461.1
[1] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[2] ZHANG Man, SHI Shu-ming. Analysis of state transition characteristics for typical vehicle driving cycles [J]. 吉林大学学报(工学版), 2018, 48(4): 1008-1015.
[3] SUN Wen, WANG Qing-nian, WANG Jun-nian. Yaw-moment control of motorized vehicle for energy conservation during cornering [J]. 吉林大学学报(工学版), 2018, 48(1): 11-19.
[4] WANG Jing-yu, YU Xu-tao, HU Xing-jun, GUO Peng, XIN Li, GUO Feng, ZHANG Yang-hui. Fluid-induced vibration and flow mechanism of automotive external rearview mirror [J]. 吉林大学学报(工学版), 2017, 47(6): 1669-1676.
[5] ZHANG Jia-xu, LI Jing. Parameter identification for UniTire model based on hybrid optimization method [J]. 吉林大学学报(工学版), 2017, 47(1): 15-20.
[6] LIN Nan, SHI Shu-ming, MA Li, KUI Hai-lin. Road grade estimation with grade change rate information [J]. 吉林大学学报(工学版), 2016, 46(6): 1845-1850.
[7] SONG Kang, CHEN Xiao-kai, LIN Yi. Robust design of powertrain mounting system [J]. 吉林大学学报(工学版), 2016, 46(3): 692-699.
[8] WEI Wei, LIU Xin-hui, WANG Tong-jian, DONG Han, ZHAO Feng. Minimum driving torque of climbing obstacle with wheeled vehicle of oscillating body and its influential factors [J]. 吉林大学学报(工学版), 2013, 43(05): 1190-1195.
[9] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach [J]. 吉林大学学报(工学版), 2013, 43(03): 577-583.
[10] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck [J]. 吉林大学学报(工学版), 2013, 43(03): 595-601.
[11] GUAN Xin, CUI Wen-feng, JIA Xin. Vehicle longitudinal speed split-phase control [J]. 吉林大学学报(工学版), 2013, 43(02): 273-277.
[12] HE Rong, GUO Rui, GUAN Xin, PENG Li-en. Physical mechanism and parameter identification of Fancher leaf spring model [J]. 吉林大学学报(工学版), 2013, 43(01): 12-16.
[13] YANG Fei, DENG Zong-quan, TAO Jian-guo, LIU Ji-cheng. Rational wheel number for lunar rover [J]. , 2012, 42(05): 1113-1119.
[14] HU Xing-jun, LI Teng-fei, GUO Peng, QIN Peng, LIAO Lei, WANG Jing-yu. Influence of wheel spoiler on aerodynamic drag of passenger car [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 32-36.
[15] WANG Xin-yu, HU Xing-jun, LI Teng-fei, LIAO Lei. Impact of one novel side skirt on aerodynamic characteristics for heavy-duty truck [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 37-40.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!