吉林大学学报(工学版) ›› 2015, Vol. 45 ›› Issue (3): 844-850.doi: 10.13229/j.cnki.jdxbgxb201503023

Previous Articles     Next Articles

Experiment and simulation on body center-of-mass momentum during sit-to-stand assisted by rehabilitation robot

WANG Zhi-qiang1, JIANG Hong-yuan1, ROMAN Kamnik2   

  1. 1. School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin 150001,China;
    2.Laboratory of Robotics, Faculty of Electrical Engineering, University of Ljubljana, Ljubljana 1000, Slovenia
  • Received:2013-10-14 Online:2015-05-01 Published:2015-05-01

Abstract: To analyze the change rule of body center-of-mass momentum during sit-to-stand motion assisted by rehabilitation robot, the trajectory and center-of-mass momentum of human body are measured. A mathematical model of the body center-of-mass momentum is derived based on Lagrangian equation. The position of mass center during standing up is obtained by auxiliary parallelogram method. The trajectory and momentum are measured during standing up with low, normal and fast assisting velocities. A simulation model is built up in Matlab/Simulink based on the proposed mathematical model to simulate the trajectory and momentum. The results show that sit-to-stand motion is carried out steadily with different assistant velocities of the robot. Through the analysis of horizontal and vertical peak center-of-mass momentum, it is found that the horizontal momentum is the determinant of the stable standing up motion, and the vertical momentum is the determinant of the complete sit-to-stand process. The simulation and measuring curves fit well, which demonstrates the effectiveness of the proposed model in predicting body position and center-of-mass momentum during sit-to-stand motion. This work provides references for stable standing up analysis and robot assisted rehabilitation.

Key words: machine design, rehabilitative robot, assistive standing-up, mass center of human body, linear and angular momentum

CLC Number: 

  • R496
[1] 王志强,姜洪源,Roman Kamink. 辅助起立机器人轨迹追踪仿真及试验研究[J]. 医用生物力学,2013,28(2):171-177.
Wang Zhi-qiang, Jiang Hong-yuan, Roman Kamink. Simulation and experimental study on trajectory tracking of the assistive standing-up robot[J]. Journal of Medical Biomechanics,2013,28(2):171-177.
[2] Scarborough D M,McGibbon C A,Krebs D E. Chair rise strategies in older adults with functional limitations[J]. Journal of Rehabilitation Research & Development,2007,44(1):33-42.
[3] Neptune R R,McGowan C P. Muscle contributions to whole-body sagittal plane angular momentum during walking[J]. Journal of Biomechanics,2011,44(1):6-12.
[4] Musi c ' J,Kamnik R,Munih M. Model based inertial sensing of human body motion kinematics in sit-to-stand movement[J]. Simulation Modeling Practice and Theory,2008,16(8):933-944.
[5] Flaxman T E,Speirs A D,Benoit D L. Joint stabilisers or moment actuators: the role of knee joint muscles while weight-bearing[J]. Journal of Biomechanics,2012,45(15):2570-2576.
[6] Kaya B K,Krebs D E,Riley P O. Dynamic stability in elders: momentum control in locomotor ADL[J]. Journal of Gerontology: Medical Sciences,1998,53(2):126-134.
[7] 王志强. 站立康复功能辅助机器人系统的控制及其关键技术研究[D].哈尔滨:哈尔滨工业大学机电工程学院,2014.
Wang Zhi-qiang. Control of the rehabilitative standing-up robot system for sit-to-stand motion and research on key technology[D]. Harbin:School of Mechatronics Engineering , Harbin Institute of Technology,2014.
[8] 王志强,姜洪源,Roman Kamink. 辅助起立机器人反馈控制与速度前馈控制性能对比[J]. 机器人学报,2012,34(6):641-645.
Wang Zhi-qiang,Jiang Hong-yuan,Roman Kamink. Performance comparison on assistive standing-up robot with feedback and velocity feed-forward control[J]. ROBOT,2012,34(6):641-645.
[9] De Leva P. Adjustments to Zatsiorsky-Seluyanov's segment inertia parameters[J]. Journal of Biomechanics,1996,29(9):1223-1230.
[1] MAO Yu-ze, WANG Li-qin. Influence of squirrel-cage flexible support on the dynamic performance of ball bearing [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1508-1514.
[2] OUYANG Tian-cheng, CHEN Nan, NIU Ya-feng. Mixed elastohydrodynamic lubrication for involute gear with different rough surfaces [J]. 吉林大学学报(工学版), 2016, 46(6): 1933-1939.
[3] RU Shao-feng, QIAO Jing-bo, CUI Teng-fei, CONG Qian. Structural design and optimization experiment of dynamic seal on rubber plunger [J]. 吉林大学学报(工学版), 2016, 46(3): 839-844.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!