Journal of Jilin University(Engineering and Technology Edition) ›› 2021, Vol. 51 ›› Issue (1): 233-244.doi: 10.13229/j.cnki.jdxbgxb20190937

Previous Articles    

Colorimetry method in assessing fire-damaged concrete

Ya WEI1(),Wei-kang KONG2,Cheng WAN1,Yong-zhi ZUO3,Qiao-zhi LU3   

  1. 1.Department of Civil Engineering，Tsinghua University，Beijing 100084，China
    2.Shanxi Provincial Major Laboratory for Highway Bridge and Tunnel，Chang′an University，Xi′an 710064，China
    3.Beijing Building Construction Research Institute，Beijing 100039，China
  • Received:2019-07-26 Online:2021-01-01 Published:2021-01-20

RICH HTML

 2   

PDF (PC)

158

Abstract:

The traditional methods for assessing the fire damaged concrete structures require large amount of experimental efforts， and some other new technologies are expensive and their applicability still needs further investigation. In view of this， a colorimetric method based on the optical analysis is proposed to evaluate the heating damage of the concrete in terms of the translation of the color coordinates in the chromaticity diagram. Fire damage experiment was first conducted on the C30 concrete cubes. And then photos were taken under the conditions of daylight vs. fluorescent and manual white balance vs. auto white balance. The chromaticity diagram is constructed to represent the relationship between the coordinates of the concrete colors and the maximum temperature that the concrete was subject to. The maximum temperature that the concrete experienced can thus be determined based on concrete color. The conditions under the daylight and the manual white balance are recommended to take photos for constructing chromaticity diagram. The results of this study will advance the technology for assessing fire-damaged concrete.

Key words: concrete color, chromaticity diagram, colorimetry method, fire-damage, RBG value

CLC Number: 

  • TB321

Fig.1

Combination ratio of all colors in RGB color space and XYZ color space"

Fig.2

Combination ratio of all colors in XYZ color space"

Fig.3

Photos taken under condition of daylight-auto white balance for C30 concrete after heating for 1 h"

Fig.4

Photos taken under condition of daylight-manual white balance for C30 concrete after heating for 1 h"

Fig.5

Chromaticity diagram of C30 concrete with photos taken under conditions of daylight-auto white balance"

Fig.6

Chromaticity diagram of C30 concrete with photos taken under conditions of daylight-manual white balance and local diagram and trend lines of C30 concrete heated at 200~400 ℃ and 400~800 ℃"

Fig.7

Chromaticity diagram of C30 concrete with photos taken under conditions of fluorescent-manual white balance"

Fig.8

Chromaticity diagram of C30 concrete heated for 1 h and 3 h with photos taken under condition of daylight- manual white balance and local diagram and trend lines of C30 concrete heated at 200~800 ℃"

Table 1

Linear distribution of coordinates of concrete color in chromaticity diagram under condition of daylight and manual white balance, and linear equation y=ax+b"

水泥型号加热时间温度/℃abR2x范围来源
C301 h2000.92580.06070.9700(0.323, 0.335)图6
4000.89240.06870.9747(0.324, 0.334)
6000.90020.06580.9914(0.312, 0.322)
8000.89510.06740.9659(0.308, 0.311)
3 h2000.93480.05880.9674(0.318, 0.334)图8
4000.88750.07080.9912(0.321, 0.332)
6000.88850.06940.9715(0.311, 0.318)
8000.89080.06880.9582(0.308, 0.311)
1 Vejmelková E, Koňáková D, Scheinherrová L, et al. High temperature durability of fiber reinforced high alumina cement composites[J]. Construction and Building Materials, 2018, 162: 881-891.
2 Zhang Q, Ye G. Dehydration kinetics of Portland cement paste at high temperature[J]. Journal of Thermal Analysis and Calorimetry, 2012, 110(1): 153-158.
3 Sabeur H, Platret G, Vincent J. Composition and microstructural changes in an aged cement pastes upon two heating-cooling regimes, as studied by thermal analysis and X-ray diffraction[J]. Journal of Thermal Analysis and Calorimetry, 2016, 126: 1023-1043.
4 Collier N C. Transition and decomposition temperatures of cement phase―a collection of thermal analysis data points[J]. Ceramics-Silikáty, 2016, 60(4): 338­343.
5 Schneider U. CIB W14 Report, reparability of fire damaged structures[J]. Fire Safety Journal, 1990, 16: 251-336.
6 Kim K Y, Yun T S, Park P K. Evaluation of pore structures and cracking in cement paste exposed to elevated temperatures by X-ray computed tomography[J]. Cement and Concrete Research, 2013, 50: 34-40.
7 Li Z H, Wong L N Y, Teh C I. Low cost colorimetry for assessment of fire damage in rock[J]. Engineering Geology, 2017, 228, 50-60.
8 陈明阳, 侯晓萌, 郑文忠, 等. 混凝土高温爆裂临界温度和防爆裂纤维掺量研究综述与分析[J]. 建筑结构学报, 2017, 38(1): 161-170.
Chen Ming-yang, Hou Xiao-meng, Zheng Wen-zhong, et al. Review and analysis on spalling critical temperature of concrete and fibers dosage to prevent spalling at elevated temperatures[J]. Journal of Building Structures, 2017, 38(1): 161-170.
9 郑文忠, 侯晓萌, 王英. 混凝土及预应力混凝土结构抗火研究现状与展望[J]. 哈尔滨工业大学学报, 2016, 48(12): 1-18.
Zheng Wen-zhong, Hou Xiao-meng, Wang Ying. Progress and prospect of fire resistance of reinforced concrete and prestressed concrete structures[J]. Journal of Harbin Institute of Technology, 2016, 48(12): 1-18.
10 Zheng W Z, Hou X M, Shi D S, et al. Experimental study on concrete spalling in prestressed slabs subjected to fire[J]. Fire Safety Journal, 2010, 45(5): 283-297.
11 Osumi A, Enomoto M, Ito Y. Basic study of an estimation method for fire damage within concrete sample using high-intensity ultrasonic waves and optical equipment[J]. Japanese Journal of Applied Physics, 2014, 53(7S): 07KC16.
12 Yang Y. Evaluating temperature distribution of the sections of fire damaged concrete elements by ultrasonic pulse method[J]. Journal of Southwest Jiaotong University, 1993.
13 Shin S W, Kim S Y, Kim J S. Applicability of impact-echo method for assessment of residual strength of fire-damaged concrete[J]. Journal of Metals Materials and Minerals, 2013, 23(1): 105-112.
14 Du H X, Zhang X, Han J H. Testing and evaluating damage of concrete exposed to fire by infrared thermal image[J]. Journal of Tongji University, 2002(9);1078-1082.
15 Felicetti R. The drilling resistance test for the assessment of fire damaged concrete[J]. Cement and Concrete Composites, 2006, 28(4): 321-329.
16 Felicetti R. Digital camera colorimetry for the assessment of fire damaged concrete[C]∥ Proceedings of the Workshop on Fire Design of Concrete Structures: What now?What next?, Milan, Italy,2004:211-220.
17 Colombo M, Felicetti R. New NDT techniques for the assessment of fire-damaged concrete structures[J]. Fire Safety Journal, 2007, 42(6/7): 461-472.
18 Hager I. Colour change in heated concrete[J]. Fire Technology, 2014, 50(4): 945-958.
19 Ashby M F, Ferreira P J, Schodek D L. Nanomaterials, Nanotechnologies and Design: An Introduction for Engineers and Architects[M]. London:Butterworth-Heinemann, 2009.
20 Ashby M F, Shercliff H, Cebon D. Materials: Engineering, Science, Processing and Design(Third ed)[M]. London:Butterworth-Heinemann, 2013.
21 Bessey G E. Investigations on building fires, part2:the visible changes in concrete or mortar exposed to high temperatures[M]//National Building Studies Technical Paper 4, London: HMSO Publishing, 1950: 6-18.
22 Ingham J P. Application of petrographic examination techniques to the assessment of fire-damaged concrete and masonry structures[J]. Materials Characterization, 2009, 60(7): 700-709.
23 Carré H, Hager I, Perlot C. Contribution to the development of colorimetry as a method for the assessment of fire-damaged concrete[J]. European Journal of Environmental and Civil Engineering, 2014, 18(10): 1130-1144.
24 Oestmo S. Digital imaging technology and experimental archeology: a methodological framework for the identification and interpretation of fire modified rock(FMR)[J]. Journal of Archaeological Science, 2013, 40(12): 4429-4443.
25 Felicetti R. Assessment methods of fire damages in concrete tunnel linings[J]. Fire Technology, 2013, 49(2): 509-529.
26 Gómez-Robledo L, López-Ruiz N, Melgosa M, et al. Using the mobile phone as Munsell soil-colour sensor: an experiment under controlled illumination conditions[J]. Computers and Electronics in Agriculture, 2013, 99: 200-208.
27 Annarel E, Taerwe L. Methods to quantify the colour development of concrete exposed to fire[J]. Construction and Building Materials, 2011, 25(10): 3989-3997.
28 Annarel E, Taerwe L. Revealing the temperature history in concrete after fire exposure by microscopic analysis[J]. Cement and Concrete Research, 2009, 39(12): 1239-1249.
29 Short N R, Purkiss J A, Guise S E. Assessment of fire damaged concrete using colour image analysis[J]. Construction and Building Materials, 2001, 15(1): 9-15.
30 Short N R, Purkiss J A, Guise S E. Assessment of fire-damaged concrete using crack density measurements[J]. Structural Concrete, 2002, 3(3): 137-143.
31 Cowan W B. An inexpensive scheme for calibration of a colour monitor in terms of CIE standard coordinates[J]. ACM SIGGRAPH Computer Graphics, 1983, 17(3): 315-321.
32 公安部消防局. 2018中国消防年鉴[M]. 云南: 云南人民出版社, 2018.
33 Midgley H G. The use of thermal analysis methods in assessing the quality of high alumina cement concrete[J]. Journal of Thermal Analysis, 1978, 13(3): 515-524.
34 Raina S J, Vishwanathan V N, Ghosh S N. Instrumental techniques for investigation of damaged concrete[J]. Indian Concrete Journal, 1978, 52(5/6):147-149.
[1] ZHANG Pei-ping, WANG Li-dan，ZHANG Li-gong, LUO Jin-song2, FAN Yi . Preparation and properties of Nd/Si codoped YAG powders
 [J]. 吉林大学学报(工学版), 2009, 39(02): 354-0357.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd