J4 ›› 2011, Vol. 49 ›› Issue (05): 939-943.

• 化学 • 上一篇    下一篇

含联苯结构环氧树脂/蒙脱土纳米复合材料的制备及其固化反应动力学

崔继文1,2, 王书红1, 张瑞仁1, 那辉2, 孟令锴3   

  1. 1. 佳木斯大学 药学院, 黑龙江 佳木斯 154000; 2. 吉林大学 化学学院, 长春 130012;3. 牡丹江医学院 药学系, 黑龙江 牡丹江 153000
  • 收稿日期:2010-12-30 出版日期:2011-09-26 发布日期:2011-09-27
  • 通讯作者: 崔继文 E-mail:cjwhljjms@sina.com

Preparation and Curing Reaction Kinetics of Epoxy Resin Containing Biphenyl Structure/Montmorillonite Nanocomposites

CUI Jiwen1,2, WANG Shuhong1, ZHANG Ruiren1, NA Hui2, MENG Lingkai3   

  1. 1. College of Pharmacy, Jiamusi University, Jiamusi 154000, Heilongjiang Province, China;2. College of Chemistry, Jilin University, Changchun 130012, China;3. Department of Pharmacy, Mudanjiang Medical University, Mudanjiang 153000, Heilongjiang Province, China
  • Received:2010-12-30 Online:2011-09-26 Published:2011-09-27
  • Contact: CUI Jiwen E-mail:cjwhljjms@sina.com

摘要:

采用含联苯结构环氧树脂3,3′,5,5′四甲基联苯二酚二缩水甘油醚 (TMBP)与层间距为2.33 nm的有机蒙脱土(OMMT)进行插层复合, 并选用芳香型固化剂4,4′二氨基二苯甲烷(DDM), 制备了TMBP/DDM/MMT纳米复合材料. 采用非等温差示扫描量热法(DSC)研究该体系的固化反应动力学, 求得其表观活化能Δ E=51.25 kJ/mol, 反应级数为0.88. 采用X射线衍射(XRD)研究蒙脱土的质量分数对其在环氧树脂中的插层及剥离行为的影响. 结果表明: 只有在蒙脱土的质量分数较低时才能得到剥离型纳米复合材料; 性能测试数据表明, 该复合材料具有较高的拉伸强度、 弯曲模量、 冲击强度和较高的玻璃化转变温度.

关键词: 有机蒙脱土(OMMT); 4,4′二氨基二苯甲烷 (DDM); 含联苯结构环氧树脂 (TMBP); 固化反应动力学; 纳米复合材料; X射线衍射

Abstract:

A new type of epoxy resin containing biphenyl  structure/organomontmorillonite nanocomposites was reported, which was based on 3,3′,5,5′tetramethyldiphenoldiglycidyl ether and OMMT. The interlayer spacing  of the OMMT, corresponding to the d(001) plane peak was 2.33 nm. The curing reaction kinetics of the TMBP/MMT system was studied by means of nonisothermal DSC. Based on the Kissinger method, the apparent activation energy (Δ E) was calculated to be 51.25 kJ/mol. The reaction order (n=0.88) was calculated according to Crane theory. The influences of the content of OMMT on the intercalation and exfoliation structures of TMBP/DDM/MMT composites were investigated by wide Xray diffraction (WXRD). The Xray patterns reveal that only at the lower content of OMMT, could the exfoliation nanocomposites be formed. The mechanical and thermal  properties of the composites were measured. The results indicate that the composites have better mechanical properties and higher Tg than the pristine epoxy resin.

Key words: organomontmorillonite (OMMT), 4,4′diaminodiphenylmethane (DDM), epoxy resin containing biphenyl structure (TMBP), curing reaction kinetic, nanocomposite, X-ray diffraction

中图分类号: 

  • O633.13