line loss, distribution network, reduce energy consumption, equivalent resistance method ,"/> 等值电阻法在配电线路线损计算中的应用

吉林大学学报(信息科学版) ›› 2022, Vol. 40 ›› Issue (5): 856-861.

• • 上一篇    下一篇

等值电阻法在配电线路线损计算中的应用

郭庆伟1 , 黄 珊2 , 郭秀娟2 , 张 朝3   

  1. 1. 中国华电科工集团有限公司 环境保护分公司, 北京 100160; 2. 吉林建筑大学 电气与计算机学院, 长春 130118; 3. 吉林大学 仪器科学与电气工程学院, 长春 130061
  • 收稿日期:2020-09-07 出版日期:2022-10-10 发布日期:2022-10-10
  • 作者简介:郭庆伟(1969— ), 男, 吉林德惠人, 中国华电科工集团有限公司工程师, 主要从事火电环境保护研究, ( Tel) 86- 15801651805(E-mail)creat111@ aliyun. com。
  • 基金资助:
    长春市重大科技攻关基金资助项目(18SS005) 

Application of Equivalent Resistance Method in Line Loss Calculation for Distribution Lines 

GUO Qingwei 1 , HUANG Shan 2 , GUO Xiujuan 2 , ZHANG Zhao 3   

  1. 1. Environmental Protection Branch, China Huadian Engineering Company Limited, Beijing 100160, China; 2. School of Electrical and Computer Engineering, Jilin Jianzhu University, Changchun 130118, China; 3. College of Instrumentation and Electrical Engineering, Jilin University, Changchun 130061, China
  • Received:2020-09-07 Online:2022-10-10 Published:2022-10-10

摘要: 在电力系统中, 线损是电能损耗比较常见的一种能量损失, 因此, 分析配电网线损产生的原因, 并对其 进行理论计算, 对降低能耗显得尤为重要。 分析了线损产生的基本原因, 同时对计算线损的常用方法进行简单 分析。 在诸多方法中, 针对等值电阻法具有适用于运行中配电网电能耗损计算的特点, 对等值电阻法的原理, 应用条件等进行分析, 将等值电阻法应用于 10 kV 配电线路的线损计算中。 利用算例结果和实际对比, 从实用 性角度出发, 分析该方法在实际中的应用性。 结果表明, 等值电阻法误差较小, 其结果对建立线损的评估指标 具有一定的参考意义。

关键词: 线损, 配电网, 降低能耗, 等值电阻法

Abstract: In power system, line loss is a common energy loss of electric energy loss. Therefore, it is particularly important to analyze the causes of line loss in distribution network and carry out theoretical calculation to reduce energy consumption. This paper introduces the basic causes of line loss and simply analyzes the common methods of calculating line loss. In many methods, in view of the equivalent resistance method is suitable for the operation of the distribution network electric energy loss calculation characteristics, the principle of equivalent resistance method, application conditions are analyzed, the equivalent resistance method is applied in the 10 kV distribution line loss calculation. Based on the comparison between the result of calculation example and practice, the application of this method in practice is analyzed. The results show that the error of equivalent resistance method is small, and the results have a certain reference significance to establish the evaluation index of line loss.

Key words: line loss')">

line loss, distribution network, reduce energy consumption, equivalent resistance method

中图分类号: 

  • TP744