吉林大学学报(信息科学版) ›› 2024, Vol. 42 ›› Issue (6): 1136-1141.

• • 上一篇    下一篇

便携式氮气检测仪的研究与设计

贺 媛,于沐枫,李 京,舒怡宁,林宇萌,吴珊珊,李 昕   

  1. 吉林大学电子科学与工程学院,长春130012
  • 收稿日期:2024-10-03 出版日期:2024-12-23 发布日期:2024-12-23
  • 作者简介:贺媛(1983— ), 女, 陕西榆林人, 吉林大学高级工程师,主要从事微纳材料及传感器件性能研究,(Tel)86-13596436318 (E-mail)heyuan@ jlu. edu. cn。
  • 基金资助:
    吉林省科技发展计划基金资助项目(20220402010GH); 吉林大学大学生创新创业训练计划基金资助项目(X202410183252); 吉林大学实验技术基金资助项目(SYXM2024a008); 吉林大学本科教学改革研究基金资助项目(2023XYB095)

Study and Design of Portable Nitrogen Gas Detector

HE Yuan, YU Mufeng, LI Jing, SHU Yining, LIN Yumeng, WU Shanshan, LI Xin    

  1. College of Electrnic Science and Engineering, Jilin University, Changchun 130012, China
  • Received:2024-10-03 Online:2024-12-23 Published:2024-12-23

摘要: 针对气调储粮室内气体浓度实时检测问题,设计了一款基于STC89C52单片机和氧传感器的便携式氮气 浓度检测仪。 依据大气中氮气和氧气浓度在忽略稀有气体的条件下几乎互补的原理,将检测气调储粮室内 氮气浓度转化为检测氧气浓度,最终再换算出环境中氮气浓度百分比。 当气调储粮室内氮气浓度百分比低于 预设值97%, 检测仪能实现声光报警功能, 同时可实时显示储粮室内氮气浓度百分比信息和温湿度信息。 硬件系统包括氧传感器、温湿度传感器等信号采集电路、信号调理电路、模数转换电路、STC89C52单片机和声 光报警单元。 软件设计选用C语言和Keil开发环境。 实验测试结果表明,该检测仪可实时显示环境信息且在 环境中氮气浓度低于预设值97%时能立即启动报警,实现了预期功能。

关键词: 传感器, 单片机, 检测仪

Abstract: A portable nitrogen concentration detector based on the STC89C52 single chip microcomputer and an oxygen sensor is designed for the purpose of real-time detection of gas concentration in the gas regulating storage room. According to the principle that the concentrations of nitrogen and oxygen in the atmosphere is almost complementary when the rare gases are ignored, the monitoring of nitrogen concentration in grain storage rooms can be converted into monitoring oxygen concentration, which can ultimately be converted back to calculate the percentage of nitrogen concentration in the environment. When the nitrogen concentration percentage in the grain storage room is below the preset value of 97% , an audible and visual alarm function can be activated, while the nitrogen concentration percentage, temperature, and humidity information inside the grain storage room can be displayed in real-time. The hardware system includes signal acquisition circuits such as an oxygen sensor and a temperature and humidity sensor, signal conditioning circuits, analog-to-digital conversion circuits, an STC89C52 single chip microcomputer, and an audible and visual alarm unit. For software design, the C language and Keil development environment are selected. The experimental test results indicate that the detector can display environmental information in real-time and immediately trigger an alarm when the nitrogen concentration in the environment falls below the preset value of 97% , fulfilling its expected functions.

Key words: sensor, single chip microcomputer, detector 

中图分类号: 

  • TP212