J4

• 地质工程与环境工程 • Previous Articles     Next Articles

Design Calculations for Air Directional Drilling

ZHANG Ya-chun1,2,LIU Qiang2,3,XIANG Jun-wen2,3, LONG Dong2   

  1. 1.School of Engineering, China University of Geosciences, Wuhan 430074, China;2.Institute of Exploration Techniques, Chinese Academy of Geological Sciences, Langfang, Hebei 065000, China;3.School of Engineering and Technology, China University of Geosciences, Beijing 100083, China
  • Received:2008-06-03 Revised:1900-01-01 Online:2009-03-26 Published:2009-03-26
  • Contact: ZHANG Ya-chun

Abstract: The well was analyzed by dividing it into the vertical portion, build-up portion and horizontal portion according to the air directional drilling characteristics. The design and method of air directional drilling were introduced. The theoretical air injection volumes at four correction methods were compared for better application of this technology. The results showed that the experimental correction method was the safest and most reliable method by taking into account of various factors, namely, the air injection volume where the theoretical down hole pressure was increased to 1.7 times was taken as the actual injection volume.

Key words: air directional drilling, correction method for air injection volume, drilling

CLC Number: 

  • P634.2
[1] Liao Dongliang, Zeng Yijin. Establishment of Formation Shear Fracture Model by Logging Data [J]. Journal of Jilin University(Earth Science Edition), 2018, 48(4): 1268-1276.
[2] Chen Baoyi, Yue Tao, Cao Pinlu, Wang Rusheng, Wang Maosen, Bo Kun, Long Xiang, Lu Siyu. Theoretical Analysis and Numerical Simulation of Heat Exchange Efficiency of U-Tube Ground Heat Exchanger Under the Condition of Soil Compaction [J]. Journal of Jilin University(Earth Science Edition), 2016, 46(6): 1808-1814.
[3] Lan Kai, Liu Mingguo, Chao Wenxue. Determination of Collapse Pressure for Deviated Wellbore in Transversely Isotropic Water-Sensitive Formation [J]. Journal of Jilin University(Earth Science Edition), 2015, 45(1): 198-206.
[4] Yang Zhen，Yang Jinzhou，Han Laiju. Numerical Simulation and Application of Azimuthal Propagation Resistivity Imaging While Drilling [J]. Journal of Jilin University(Earth Science Edition), 2013, 43(6): 2035-2043.
[5] Wang Jie, Lin Daming, Ma Fengshan,Li Kepeng. Study on and Application of Strength Assessment for Sandstone：In Anyang Section of Middle Line in South-to-North Water Diversion [J]. Journal of Jilin University(Earth Science Edition), 2013, 43(5): 1549-1555.
[6] YANG Xiao-feng, LI Xiao-hong, LU Yi-yu, KANG Yong. Experimental of Infrared Thermal Image in Limestone Drilling [J]. J4, 2011, 41(5): 1504-1511.
[7] GUO Wei, SUN You-hong, CHEN Chen, ZHANG Zu-pei. Sampling for Land Gas Hydrates by Hole Bottom Freezing [J]. J4, 2011, 41(4): 1116-1120.
[8] E Er-Ba, Sun You-hong. Experiments and Numerical Simulation of Defoaming for Energy Storage Tube [J]. J4, 2010, 40(5): 1145-1148.
[9] ZHANG Feng, GUO Jian-fang, WANG Xin-guang. Monte Carlo Simulation of Neutron Porosity Response Under the Condition of Air Drilling [J]. J4, 2010, 40(1): 209-214.
[10] PIAO Jin-shi, YIN Kun, FAN Li-ming. Neural Network Method in the Penetration Rate Prediction of Percussive Drilling [J]. J4, 2009, 39(5): 882-886.
[11] WANG Zhu-wen,LIU Jing-hua,NIE Chun-yan. Primary Study on the Relationship between Primary Wave Frequency Characteristics and Structural Zone-Its Applications in the CCSD [J]. J4, 2008, 38(6): 1065-1069.
[12] PENG Xin-ming, LIU Da-jun, CHAI Er-hui, ZHU Ji-dong, SUN You-hong. Prospect Analysis and Application of Foam Increasing Pressure Device by a Dual Action Pump [J]. J4, 2008, 38(4): 659-0662.
[13] LIU San-yi,XIAO Bai-ru. Multi-Process Rotary Digging Tools and Their Application in Frozen Formation [J]. J4, 2008, 38(3): 460-0462.
[14] ZHENG Zhi-chuan，YIN Kun，WANG Qing-yan，PENG Jian-ming，SU Ji-jun. Development of QFGZ Type Bit for Simultaneous Casing While Reverse Circulation Drilling with DTH Air Hammer [J]. J4, 2007, 37(5): 1052-1054.
[15] GAO Ke,SUN Rong-jun,SUN You-hong. Prospect of Application of Foam Pump Increasing Pressure Equipment in Construction of Drilling Long Hole for Sucking and Exhaling Mash Gas [J]. J4, 2005, 35(04): 543-0544.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Earth Science Edition), All Rights Reserved.
Tel: +86-431-88502374；13756165364　E-mail: xuebao1956@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd