20CrMnTi钢的位错密度及晶体结构

吉林大学学报(工学版) ›› 2004, Vol. ›› Issue (1): 31-34.

20CrMnTi钢的位错密度及晶体结构

程万军¹, 高占民², 黄良驹²

1. 吉林大学, 材料科学与工程学院, 吉林, 长春, 130025;
2. 吉林大学, 辊锻工艺研究所, 吉林, 长春, 130025

收稿日期:2003-01-25 出版日期:2004-01-01
基金资助:
"九五"国家科技攻关资助项目(96-A22-03-02).

Determination of dislocation densities and crystal structure on 20CrMnTi steel

CHENG Wan-jun¹, GAO Zhan-min², HUANG Liang-ju²

1. College of Material Science and Engineering, Jilin University, Changchun 130025, China;
2. Roll Forging Institute, Jilin University, Changchun 130025, China

Received:2003-01-25 Online:2004-01-01

摘要/Abstract

摘要： 采用X射线衍射法及新的线性分析理论,准确地测量了不同应变量时20CrMnTi钢的位错密度,分析了应变量与位错密度的关系。结果表明:位错密度随变形量的增加而提高,退火状态时位错密度较低。透射电镜试验证明了20CrMnTi退火后的组织为铁素体和珠光体,晶内位错表态为"曲折"形的位错线,变形后形成胞状结构,同时有孪晶出现。胞状结构的出现大大提高了钢的强度。

关键词: 20CrMnTi钢, X射线衍射, 位错密度, 晶体结构, 位错形态

Abstract: Dislocation densities in 20CrMnTi steel under different sizes of strain were determined exactly by X-ray diffraction method and a new profile analysis theory. The relation of strain and dislocation densities was analyzed. The results show that the increase of dislocation density is accompanied by the increase of deformation amount. The dislocation density has lower value when the steel is annealed. TEM tests prove that 20CrMnTi become ferrite and pearlite after annealing. Intragranular dislocation appears as zigzag dislocation line and comes into being cell structure with the appearance of twin crystals after deformation. Cell structure improves the strength of steel greatly.

Key words: 20CrMnTi steel, X-ray diffraction, dislocation densities, crystal structure, dislocation mode

中图分类号:

TG144

程万军, 高占民, 黄良驹. 20CrMnTi钢的位错密度及晶体结构[J]. 吉林大学学报(工学版), 2004, (1): 31-34.

CHENG Wan-jun, GAO Zhan-min, HUANG Liang-ju. Determination of dislocation densities and crystal structure on 20CrMnTi steel[J]. 吉林大学学报(工学版), 2004, (1): 31-34.

参考文献

[1] 陈明伟,单爱党,林栋梁. Fe3Al基合金超塑性变形过程中位错结构的演化［J］.金属热处理学报,1995,16(3):9-14.
[2] 张静江,王滨,奚建法,沈佳球. 高锰低温钢晶体结构及位错形态研究［J］.机械工程学报,1998,34(6):23-26.
[3] 谢书银,袁鹏,万关良,李励本,张锦心. 硅片塑性形变与位错［J］.稀有金属,1998,22(3):208-211.
[4] 李航月,胡奈赛,何家文,周惠久. 残余压应力场中裂纹扩展的闭合模型［J］.金属学报,1998,34(8):847-850.
[5] 徐颖,陈经辉,田华,林栋梁. 金属中裂纹形核的一个理论模型［J］.材料科学与工艺,1996,4(4):1-6.
[6] 于利根,徐可为,何家文,顾海澄. 晶粒度对立方系材料织构及残余应力分析的影响［J］.金属学报,1995,31(5):B233-B236.
[7] 朱峰,曹起骧,徐秉业,屈洋,李国宪,王谦和. 塑性加工中的微观组织性能控制［J］.塑性工程学报,1994,1(4):33-37.
[8] 秦紫瑞,李隆盛,刘德经. ZGOCr20Ni25Mo5Cu1.5钢的组织与性能的研究［J］.材料科学与工艺,1993,1(3):34-41.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed