Journal of Jilin University(Engineering and Technology Edition) ›› 2020, Vol. 50 ›› Issue (1): 156-164.doi: 10.13229/j.cnki.jdxbgxb20181171

Previous Articles    

Modified hyperbola model of interface between unsaturated remolded loess and concrete

Deng-hui GAO1,2(),Yi-chuan XING2,Min-xia GUO3,Ai-jun ZHANG3,Xian-tao WANG4,Bao-hong MA5   

  1. 1. Department of Architectural and Civil Engineering, University of Huanghuai, Zhumadian 463000, China
    2. China Institute of Water Resources and Hydropower Research, Beijing 100048, China
    3. College of Water Resources and Architectural Engineering, Northwest A&F University, Yangling 712100, China
    4. Department of Architectural Engineering, Zhumadian Vocational and Technical College, Zhumadian 463000, China
    5. Gansu Provincial Highway Aviation Tourism Investment Group, Lanzhou 730030, China
  • Received:2018-11-26 Online:2020-01-01 Published:2020-02-06

Abstract:

In order to solve the problem of interface calculation between unsaturated soil and structure coupled force and water, the direct shear tests of remolded loess and concrete interface with different moisture content were carried out. Firstly, the relationships between the initial shear stiffness coefficient, the ultimate shear strength and the normal stress in the hyperbolic model are simplified based on the test rule. Then the water content is introduced to establish the modified hyperbolic model suitable for unsaturated soil, which has six parameters and can be obtained by direct shear test of interface with different moisture content. The feasibility of the model is demonstrated by comparing the calculated results with the test results. The modified hyperbola model can consider both normal stress and moisture content, and can be used to calculate the interface mechanics between unsaturated soil and structure.

Key words: geotechnical engineering, unsaturated loess, interface, direct shear test, hyperbolic model

CLC Number: 

  • TU4

Table 1

Basic characteristic of undisturbed loess"

埋深/m 比重 干密度/(g?cm-3) 液限/% 塑限/%
3 2.71 1.27 35.3 17.9
4 2.71 1.29 33.3 17.4
5 2.71 1.27 34.6 16.6

Fig.1

"

Fig.2

"

Fig.3

"

Fig.4

Relationship curves of k?σ n "

Table 2

Values of k s i and τ u "

σ n /kPa w=10% w=15% w=20% w=25%
k s i /(kPa·mm-1) τ u /kPa k s i /(kPa·mm-1) τ u /kPa k s i /(kPa·mm-1) τ u /kPa k s i /(kPa·mm-1) τ u /kPa
50 63.3 41.0 59.9 36.5 45.0 32.3 40.0 26.8
100 76.3 70.0 63.3 61.7 48.3 59.2 48.8 53.2
200 96.2 149.3 88.5 131.6 82.0 126.6 75.8 108
300 122.0 222.2 117.6 200.0 114.9 178.6 109.9 164
400 138.9 303.0 137.0 277.8 128.2 250.0 123.5 192

Fig.5

Relationship curves of k si?σ n "

Fig.6

Relationship curves of τ u?σ n "

Table 3

Fitting parameter values of k si?σ nand τ u ?σ n "

w/% s t m n
10 0.218 53.54 0.733 -1.28
15 0.234 44.12 0.693 -4.03
20 0.261 28.98 0.615 -0.69
25 0.254 26.25 0.516 2.74

Fig.7

Relationship curves of t?w "

Fig.8

Relationship curves of m ? w "

Fig.9

"

1 夏红春,周国庆 .土-结构接触面剪切力学特性及其影响因素试验[J].中国矿业大学学报,2010,39(6):831-836.
Xia Hong-chun , Zhou Guo-qing . Experimental study of the shear mechanical characteristics at a soil-structure interface and the factors affecting them[J]. Journal of China University of Mining & Technology, 2010, 39(6):831-836.
2 Potyondy J G . Skin friction between various soils and construction materials[J]. Géotechnique, 1961, 11(4):339-353.
3 胡黎明,濮家骝 . 土与结构物接触面物理力学特性试验研究[J].岩土工程学报, 2001,23(4):431-435.
Hu Li-ming , Pu Jia-liu . Experimental study on mechanical characteristics of soil-structure interface[J]. Chinese Journal of Geotechnical Engineering, 2001, 23(4):431-435
4 金子豪,杨奇,陈琛,等 .粗糙度对混凝土‒砂土接触面力学特性的影响试验研究[J].岩石力学与工程学报, 2018,37(3):754-765.
Jin Zi-hao , Yang Qi , Chen Chen , et al . Experimental study on effects of the roughness on mechanical behaviors of concrete-sand interface[J]. Chinese Journal of Rock Mechanics and Engineering, 2018, 37(3):754-765.
5 张冬霁,卢廷浩 . 一种土与结构接触面模型的建立及其应用[J].岩土工程学报, 1998, 20(6):65-69.
Zhang Dong-ji , Lu Ting-hao . Establishment and application of a interface model between soil and structure [J]. Chinese Journal of Geotechnical Engineering, 1998, 20(6):65-69.
6 王永洪,张明义,刘俊伟,等 . 超孔隙水压力对低塑性黏性土桩土界面抗剪强度的影响[J].岩土力学, 2018,39(3): 831-838.
Wang Yong-hong , Zhang Ming-yi , Liu Jun-wei , et al . Influence of excess pore water pressure on shear strength of pile-soil interface in clayey soil[J]. Rock and Soil Mechanics, 2018, 39(3):831-838.
7 Clough G W , Duncan J M . Finite element analysis of retaining wall behavior[J]. Journal of Soil Mechanics and Foundation Engineering Division, ASCE, 1971,97(12):1657-1673.
8 Boulon M , Nova R . Modeling of soil structure interface behavior: a comparison between elastoplastic and rate-type laws[J]. Computers and Geotechnics, 1990, 17(9): 21-46.
9 殷宗泽,朱泓,许国华 .土与结构材料接触面的变形及其数学模拟[J].岩土工程学报, 1994,10(3):14-22.
Yin Zong-ze , Zhu Hong , Xu Guo-hua . Numerical simulation of the deformation in the interface between soil and structural material[J]. Chinese Journal of Geotechnical Engineering, 1994, 10(3): 14-22.
10 栾茂田,武亚军 .土与结构间接触面的非线性弹性-理想塑性模型及其应用[J].岩土力学, 2004,25(4):507-513.
Luan Mao-tian, Wu Ya-jun, A nonlinear elasto-perfectly plastic model of interface element for soil-structure interaction and its applications[J]. Rock and Soil Mechanics, 2004, 25(4):507-513.
11 张嘎,张建民 .粗粒土与结构接触面统一本构模型及试验验证[J]. 岩土工程学报, 2005,27(10):1175-1179.
Zhang Ga , Zhang Jian-min . Unified modeling of soil-structure interface and its test confirmation [J]. Chinese Journal of Geotechnical Engineering, 2005, 27(10):1175-1179.
12 Lashkari A , Torkanlou E . On the constitutive modeling of partially saturated interfaces[J]. Computers and Geotechnics, 2016(74):222-233.
13 GB/T 50123―1999.土工试验方法标准[S].
14 于友成 . 黄土浸水入渗特性原位试验研究[D].西安:长安大学公路学院,2003.
Yu You-cheng . Test study in situ for specific property of infiltrating loess[D]. Xi’an: College of Highway, Chang’an University, 2003.
15 刘方成,尚守平,王海东 .粉质黏土-混凝土接触面特性单剪试验研究[J]. 岩石力学与工程学报, 2011,30(8):1720-1728.
Liu Fang-cheng , Shang Shou-ping , Wang Hai-dong . Study of shear properties of silty clay-concrete interface by simple shear test[J]. Chinese Journal of Rock Mechanics and Engineering, 2011, 30(8):1720-1728.
16 赵春风,龚辉,赵程,等 .考虑法向应力历史的黏土-混凝土界面弹塑性分析[J].岩石力学与工程学报, 2012,31(4):848-855.
Zhao Chun-feng , Gong Hui , Zhao Cheng , et al . Elastoplastic analysis of interface between clay and concrete considering effect of normal stress history effects[J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(4):848-855.
17 卢廷浩,鲍伏波 . 接触面薄层单元耦合本构模型[J]. 水利学报, 2000(2):71-75.
Lu Ting-hao , Bao Fu-bo . A coupled constitutive model for interface thin-layer element[J]. Journal of Hydraulic Engineering, 2000(2):71-75.
18 张嘎,张建民 . 粗粒土与结构接触面单调力学特性的试验研究[J].岩土工程学报, 2004,26(1):21-25.
Zhang Ga , Zhang Jian-min . Experimental study on monotonic behavior of interface between soil and structure [J]. Chinese Journal of Geotechnical Engineering, 2004, 26(1):21-25.
19 张明义,白晓宇,高强,等 . 黏性土中桩-土界面受力机制室内试验研究[J]. 岩土力学, 2017,38(8):2167-2174.
Zhang Ming-yi , Bai Xiao-yu , Gao Qiang , et al . Experimental study on interfacial bearing mechanism of piles in cohesive soil[J]. Rock and Soil Mechanics, 2017, 38(8):2167-2174.
20 殷宗泽 .土工原理[M].北京:中国水利水电出版社,2007.
[1] Chao CHENG,Jun FU,Xin⁃long TANG,Zhi CHEN,Lu⁃quan REN. Effects of vibration mode on interface adhesion law of rice threshed mixtures [J]. Journal of Jilin University(Engineering and Technology Edition), 2019, 49(4): 1228-1235.
[2] GU Hai-dong,LUO Chun-hong. Experiment on soil arching effect of pit supporting structure with scattered row piles and soil nail wall [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1712-1724.
[3] ZHENG Xiao-yi, SUN Da-qian, LI Xin, DU Gui-gang, XIN Wei-da, REN Zhen-an. Microstructure and properties of cladded Al-Nb layers reinforced by NbAl3 [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1531-1536.
[4] JIANG Hai-yu, LIU Yu-hai, SUN Hai-lin, XU Ke-bin, BAI Tian-zeng, CHEN Zu-bin. Stratum undulation velocity model optimization algorithm for microseismic monitoring on surface [J]. 吉林大学学报(工学版), 2017, 47(6): 1969-1975.
[5] JIN Jing-fu, LI Yang, CHEN Ting-kun, CONG Qian, QI Ying-chun. Effect of elastic modulus of coating on ice-adhesion strength on substrate [J]. 吉林大学学报(工学版), 2017, 47(5): 1548-1553.
[6] YAN Ya-bin, WANG Xiao-yuan, WAN Qiang. Low-cycle fatigue fracture behavior of nanoscale interface [J]. 吉林大学学报(工学版), 2017, 47(4): 1201-1206.
[7] YANG Yue, ZHOU Lei-lei. Effect of micro-arc oxidation treatment on corrosion resistance of aluminum friction stir welding welds [J]. 吉林大学学报(工学版), 2016, 46(2): 511-515.
[8] HOU Zhong-ming, WANG Yuan-qing, XIA He, ZHANG Tian-shen. Simply-supported steel-concrete composite beams under moving load [J]. 吉林大学学报(工学版), 2015, 45(5): 1420-1427.
[9] ZHANG Zhi-qiang, JIA Xiao-fei, ZHAO Yong, LI Xiang-ji. Experiment and simulation on quenching interface heat transfer coefficient of high-strength boron steel [J]. 吉林大学学报(工学版), 2015, 45(4): 1195-1199.
[10] CAO Min, CHEN Ting-kun, CONG Qian, JIN Jing-fu. Influence of PMMA surface morphology on ice adhesion strength [J]. 吉林大学学报(工学版), 2013, 43(05): 1314-1319.
[11] CAO Xiao-ning, LIU Yu-mei, SU Jian, WANG Xiu-gang, LI Zhuo. Determination of mass center height of bogie [J]. 吉林大学学报(工学版), 2013, 43(02): 329-333.
[12] FANG Mei-yu, ZHENG Xiao-lin, CHEN De-ren, HUA Yi, SHI Yan. Design and implementation of focused crawler algorithms of product reviews [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 377-381.
[13] DUAN Zhen-zhen, LUO Meng, ZHU Song, QIU Xiao-ming. Effect of titanium surface treatment on improving the bonding strength of Ti/porcelain [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 202-206.
[14] DAI Sheng, ZUO Dun-wen, LI Xiang-feng, CHENG Hu, FANG Zhi-gang, WANG Min, MIAO Hong. Friction and wear behavior of Ni-based WC composite coating on mould steel 2738 prepared by laser cladding [J]. , 2012, 42(04): 924-929.
[15] BAI Zhi-fan, LI Gui-zhong, WANG Chao. Microstructure and mechanical property of the welded joints of S355J2W+N steel [J]. 吉林大学学报(工学版), 2011, 41(增刊2): 202-204.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!