Journal of Jilin University(Engineering and Technology Edition) ›› 2019, Vol. 49 ›› Issue (5): 1630-1635.doi: 10.13229/j.cnki.jdxbgxb20181222

Previous Articles    

Influence factors upon friction coefficient of bioinspired materials with integrated soft and hard layers

Mi WANG1,2(),Zhi-yuan LI1,Wen-xuan FAN1,Jia-yi LI1,Zhen-ning LIU1,Guo-long LU1()   

  1. 1. Key Laboratory for Bionic Engineering Ministry of Education, Jilin University, Changchun 130022, China
    2. College of Engineering, Changchun Normal University, Changchun 130032, China
  • Received:2018-12-11 Online:2019-09-01 Published:2019-09-11
  • Contact: Guo-long LU E-mail:wangmi3214@126.com;guolonglu@jlu.edu.cn

RICH HTML

 5   

PDF (PC)

156

Abstract:

In order to investigate the friction mechanism of the bioinspired materials with integrated soft and hard layers, the mathematical model of the friction process of bioinspired soft-hard integrated materials is established based on the theory of adhesive friction, taking into account the structure of soft and hard layers. The friction process of bioinspired soft-hard integrated materials was analyzed by numerical analysis software “Abaqus”. The effect of material properties, such as the volume ratio and friction coefficient of soft and hard materials, on the friction coefficient of the bioinspired materials is discussed. Bioinspired materials with integrated soft and hard layers were prepared by 3D printing and friction experiments were carried out. Experimental results verify the theoretical analysis and simulation results.

Key words: basic disciplines of materials science, soft-hard integrated, friction mechanism, bioinspired material, friction coefficient

CLC Number: 

  • TB33

Fig.1

Friction interface of materials"

Fig.2

Friction interface of bio-inspired materials with integrated soft and hard layers"

Fig.3

Finite element model of friction process"

Table 1

Basic parameters of materials"

材料泊松比密度/(g·cm-3)摩擦因数
软0.41.50.1
硬0.41.50.2

Fig.4

Mises stresses distributon of friction process of bio-inspired materials"

Fig.5

Effect of elastic modulus of hard material on friction coefficient of bio-inspired materials"

Fig.6

Effect of friction coefficient of hard material on friction coefficient of bio-inspired materials"

Fig.7

Effect of volume ratio of hard material on frictioncoefficient of bio-inspired materials"

Fig.8

Bio-inspired materials with integrated soft and hard layers"

Fig.9

Specimen of bio-inspired materials with integrated soft and hard layers"

Table 2

Material properties of soft and hard materials"

材料颜色弹性模量E/MPa摩擦因数
100极淡灰16500.0915
200淡灰12000.1057
300淡灰较6300.1398
400灰1600.1486
500较灰230.1954

Table 3

Friction coefficient of bio-inspired materials with integrated soft and hard layers"

参数实际值理论值误差/%
300/1000.11460.10489.303
300/2000.12780.11748.822
300/3000.13980.13980
300/4000.14190.14160.224
300/5000.14970.14765.602
1 史正良, 刘金龙, 宋明, 等. 人工髋关节摩擦学的研究现状[J]. 中国组织工程研究, 2008, 12(4): 731-734.
ShiZheng-liang, LiuJin-long, SongMing, et al. Research progress in tribology of artificial hip joint[J]. Journal of Clinical Rehabilitative Tissue Engineering Research, 2008, 12(4): 731-734.
2 GeorgeM. Rigid biological systems as models for synthetic composites[J]. Science, 2005, 310(5751): 1144-1147.
3 AbbaM T, HungerP M, KalidindiS R, et al. Nacre-like hybrid films: structure, properties, and the effect of relative humidity[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2015, 55: 140-150.
4 KatharineS. Structure: artificial armour[J]. Nature, 2015, 519(7455): 14,15.
5 GongS, CuiW, ZhangQ, et al. Integrated ternary bioinspired nanocomposites via synergistic toughening of reduced graphene oxide and double-walled carbon nanotubes[J]. Acs Nano, 2015, 9(12): 11568-11573.
6 KeC, ShiB, YueY, et al. Binary synergy strengthening and toughening of bio-inspired nacre-like graphene oxide/sodium alginate composite paper[J]. Acs Nano, 2015, 9(8): 8165-8175.
7 陈莉. 激光仿生非光滑表面热作模具的磨料磨损性能研究[D]. 长春: 吉林大学材料科学与工程学院, 2007.
ChenLi. Study on the grinding abrasion of hot die with bionic non-smooth surface[D]. Changchun: College of Materials Science and Engineering, Jilin University, 2007.
8 ShanH, ZhouH, SunN, et al. Study on adhesion resistance behavior of sample with striated non-smooth surface by laser processing technique[J]. Journal of Materials Processing Technology, 2008, 199(1-3): 221-229.
9 孙娜. 不同仿生耦合单元体对蠕墨铸铁摩擦磨损性能的影响[D]. 长春: 吉林大学材料科学与工程学院, 2010.
SunNa. Influences of various biomimetic coupling units on the friction and wear behaviors of compacted graphite cast iron[D].Changchun: College of Materials Science and Engineering, Jilin University, 2010.
[1] ZHAO Jian, ZHANG Jin, ZHU Bing. Fuzzy sliding mode traction control based on road friction coefficient estimation [J]. 吉林大学学报(工学版), 2015, 45(4): 1036-1042.
[2] ZHENG Hong-yu, CHEN Guo-ying, SUN Lin-lin, KONG Fan-sen, HE Lei, ZONG Chang-fu. Tire-road friction coefficient estimation based on steer-by-wire system [J]. 吉林大学学报(工学版), 2014, 44(2): 292-295.
[3] ZHANG Kuo, TAN Qing-chang, WANG Shun, WANG Cong-hui, Bian Li-juan. Friction coefficient in rough soft contact lubrication [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 86-90.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd