Journal of Jilin University(Engineering and Technology Edition) ›› 2021, Vol. 51 ›› Issue (5): 1724-1733.doi: 10.13229/j.cnki.jdxbgxb20200491

Previous Articles    

Experiment of seismic behavior of new joints between concrete filled special⁃shaped steel tube column and steel beams

Yan-song DIAO1,2(),Dang GUO1,Kang TU1,Sheng-lun JIAO1,Yun LIU1,2,Xiu-li LIU1,2   

  1. 1.School of Civil Engineering，Qingdao University of Technology，Qingdao 266033，China
    2.Collaborative Innovation Center of Engineering Construction and Safety in Shandong Blue Economic Zone，Qingdao University of Technology，Qingdao 266033，China
  • Received:2020-07-01 Online:2021-09-01 Published:2021-09-16
  • Contact: Yan-song DIAO E-mail:diaoys@163.com

RICH HTML

 1   

PDF (PC)

141

Abstract:

Joint between concrete filled special-shaped steel tube column and steel beams usually adopts inner diaphragm or outer diaphragm. However， the outer diaphragm will hamper the function of the architecture， and it is inconvenient to process the inner diaphragm， which will also obstruct the pouring quality of concrete. Therefore， a new joint combined by local thickening the tube walls in the joint zone and using a Z-shaped cantilever-beam splicing segment is presented in this paper. The concrete modifications are： （1） the outer diaphragms were replaced by local thickening the tube walls in the joint zone， （2） the Z-shaped cantilever-beam is employed to connect the concrete filled special-shaped steel tube column and steel beam. According to the strong column weak beam principle， 6 one half scaled specimens of the joint between concrete filled special-shaped steel tube column and steel beam were designed and manufactured， the number of the new joint and the joint with outer diaphragm are all 3， the column sections are L shape， T shape and 十 shape， respectively. The low-reversed loading tests for the aforesaid 6 specimens were carried out， their failure modes and the seismic behavior， such as hysteresis curve， skeleton curve， strength degradation curves， stiffness degradation curve， ductility coefficient， total energy dissipation and equivalent viscous damping ratio， were obtained. The results showed that the new joints had the relatively high bearing capacity， better ductility and energy dissipation capacity in comparison with the joint with outer diaphragm. The energy dissipation of the new joints included the contribution of the material yielding and the contribution of the slipping between the plates in the splicing area of the Z-shaped cantilever-beam and the steel beam， and the ductility of the joint was significantly improved by the slipping.

Key words: joints between concrete filled special-shaped steel tube column and steel beams, local thickening the tube wall, Z-shaped cantilever-beam splicing, seismic behavior

CLC Number: 

  • TU398.9

Fig.1

New T-shaped concrete-filled steel tube column-steel beam joint"

Fig.2

Details of test specimen"

Table 1

Main parameters of test specimens"

试件编号柱截面管壁厚度 /mm节点区管壁 厚度/mm外隔板 厚度/mm
XJD-1+512-
XJD-2T512-
XJD-3L512-
HJD-1+5510
HJD-2T5510
HJD-3L5510

Fig.3

Test loading device"

Fig.4

Loading history"

Fig.5

Layout of strain gauge of joint"

Fig.6

Layout of displacement measurement points"

Table 2

Material properties of steel"

试样

屈服强度

fy/MPa

极限强度

fu/MPa

弹性模量

E/MPa

伸长率

/%

S5317.5475.92.16×10529.4
S8294.4434.22.06×10525.0
S10281.5408.42.05×10531.8
S12298.5471.41.93×10519.8

Fig.7

Failure modes of test specimens"

Fig.8

Hysteresis curves of test specimens"

Fig.9

Skeleton curves of test specimens"

Table 3

Experimental results of specimens"

试件

编号

屈服点极限点破坏点
Py/kN⊿y/mmPmax/kN⊿max/mmPu/kN⊿u/mm
XJD-1108.728.1125.874.9125.874.9
-119.2-32.2-141.2-74.9-120.0-74.9
XJD-297.429.0121.881.8107.689.2
-108.9-30.5-134.6-89.1-134.6-89.1
XJD-390.331.7129.782.4117.1105.0
-101.3-30.7-137.0-74.9-116.5-90.7
HJD-188.419.5102.630.087.243.8
-92.1-19.8-106.9-30.0-106.9-30.0
HJD-297.025.8110.045.093.557.5
-97.7-21.0-116.2-45.0-116.2-45.0
HJD-378.618.090.345.090.345.0
-87.7-22.8-104.0-45.0-104.0-45.0

Fig.10

Strength degradation curves"

Fig.11

Equivalent stiffness degradation curves"

Table 4

Energy consumption performance of specimens"

节点编号位移延性 因数μ

总耗能

/（kN·mm）

等效黏滞阻尼因数ζeq
XJD-12.6738 589.30.25
HJD-12.102 889.00.19
XJD-23.0868 875.80.27
HJD-22.2313 725.20.28
XJD-33.3174 889.90.26
HJD-32.5013 083.00.28

Fig.12

ζeq-Δ curves of the test specimens"

Table 5

Shear deformation of node core area"

节点编号最大剪切 变形角γ/rad梁柱相对 极限角θu/rad（γ/θu）/%
XJD-10.01300.048926.6
HJD-10.00870.028230.8
XJD-20.01050.057118.4
HJD-20.01030.036822.0
XJD-30.01500.064723.2
HJD-30.00890.027632.4

Fig.13

Displacement-strain diagram of XJD-2、HJD-2 node core area"

1 许成祥. 异形截面钢管混凝土结构研究现状与分析[J]. 长江大学学报: 自然科学版, 2010, 7(3): 126-130.
Xu Cheng-xiang. Research status and analysis of concrete-filled steel tube structures with special sections[J]. Journal of Yangtze University(Natural Science Edition), 2010, 7(3): 126-130.
2 徐礼华, 杜国锋, 温芳, 等. 组合T形截面钢管混凝土柱正截面受压承载力试验研究[J]. 土木工程学报, 2009, 42(6): 14-21.
Xu Li-hua, Du Guo-feng, Wen Fang, et al. Experimental study on normal section compression bearing capacity of composite T-shaped concrete-filled steel tubular columns[J]. China Civil Engineering Journal, 2009, 42(6): 14-21.
3 葛广全. T形钢管混凝土异形柱-钢梁框架节点性能研究[J]. 福建建材, 2011, 121(2): 11-13.
Ge Guang-quan. The performances research of T-shaped steel tubular reinforced concrete filled special-shaped column and steel beam frame shaped nodes[J]. Fujian Building Materials, 2011, 121(2): 11-13.
4 万波. 异形钢管混凝土柱-钢梁框架中柱节点受力性能试验研究[D]. 荆州: 长江大学城市建设学院, 2012.
Wan Bo. Experimental study on seismic behavior of interior joints in the composite frame consisting of CFST special-shaped section columns and steel beam[D]. Jingzhou: College of Urban Construction, Yangtze University, 2012.
5 Du G F, Ma C, Xu C X. Experimental research on seismic behavior of exterior frame joints with T-shaped CFST column and steel beam[J]. Advanced Materials Research, 2011, 368-373: 183-188.
6 许成祥, 万波, 张继承, 等. 十字形钢管混凝土柱框架中节点抗震性能试验研究[J]. 建筑结构, 2012, 42(3): 80-83.
Xu Cheng-xiang, Wan Bo, Zhang Ji-cheng, et al. Experimental research on seismic behavior of interior joints in the composite frame consisting of CFST crisscross section columns and steel beams[J]. Building Structure, 2012, 42(3): 80-83.
7 周鹏, 薛建阳, 陈茜, 等. 矩形钢管混凝土异形柱-钢梁框架节点抗震性能试验研究[J]. 建筑结构学报, 2012, 33(8): 41-50.
Zhou Peng, Xue Jian-yang, Chen Qian,et al. Experimental study on seismic performance of joints between concrete-filled square steel tubular special-shaped columns and steel beams[J]. Journal of Building Structures, 2012, 33(8): 41-50.
8 陈茜, 梁斌, 刘小敏. 新型异形钢管混凝土节点破坏机理[J]. 河南科技大学学报: 自然科学版, 2016, 37(1): 58-63.
Chen Qian, Liang Bin, Liu Xiao-min. Failure mechanism of new-type shaped concrete-filled steel tube joints[J]. Journal of Henan University of Science & Technology(Natural Science Edition), 2016, 37(1): 58-63.
9 林明森, 戴绍斌, 刘记雄, 等. T形钢管混凝土柱与钢梁外伸端板连接节点抗震性能试验研究[J]. 地震工程与工程振动, 2012, 32(2): 114-119.
Lin Ming-sen, Dai Shao-bin, Liu Ji-xiong, et al. Experimental study on seismic performance of end-plate connections of concrete-filled steel tube T-section column and steel beam[J]. Earthquake Engineering and Engineering Vibration, 2012, 32(2): 114-119.
10 刘记雄, 戴绍斌, 霍凯成, 等. 异形钢管混凝土组合柱-钢梁顶底角钢连接节点抗震性能研究[J]. 四川大学学报: 工程科学版, 2015, 47(1): 128-137.
Liu Ji-xiong, Dai Shao-bin, Huo Kai-cheng, et al. Study on earthquake resistance behavior of top and seat angle joint of special-shaped concrete-filled rectangular composite tubular column with steel beam[J]. Journal of Sichuan University(Engineering Science Edition), 2015, 47(1): 128-137.
11 王亚楠. 侧板连接T形钢管混凝土柱-钢梁节点受力性能研究[D]. 郑州: 中原工学院建筑工程学院, 2017.
Wang Ya-nan. Study on the mechanical behavior of T-shaped concrete filled steel tubular columns beam with steel side joints[D]. Zhengzhou: Architecture & Civil Engineering, Zhongyuan Institute of Technology, 2017.
12 王培又. 侧板连接带约束拉杆异形钢管混凝土柱-钢梁节点抗震性能有限元分析[D]. 郑州: 中原工学院建筑工程学院, 2019.
Wang Pei-you. Finite element analysis of seismic behavior of special-shaped concrete filled steel tubular column-steel beam joints with side plate connections[D]. Zhengzhou: Architecture & Civil Engineering, Zhongyuan Institute of Technology, 2019.
13 吴一然, 石永久, 孟令野. T形钢管混凝土异形柱和工形钢梁节点承载力性能试验[J]. 沈阳建筑大学学报: 自然科学版, 2019, 35(5): 769-778.
Wu Yi-ran, Shi Yong-jiu, Meng Ling-ye. Experimental studies of joints strength performance with T-shape concrete filled steel tubular columns and I-shape steel beams[J]. Journal of Shenyang Jianzhu University(Natural Science), 2019, 35(5): 769-778.
14 张爱林, 郭志鹏, 刘学春, 等. 带Z字形悬臂梁段拼接的装配式钢框架节点抗震性能试验研究[J]. 工程力学, 2017, 34(8): 31-41.
Zhang Ai-lin, Guo Zhi-peng, Liu Xue-chun, et al. Experimental study on aseismic behavior of prefabricated steel frame joints with Z-shaped cantilever beams splicing[J]. Engineering Mechanics, 2017, 34(8): 31-41.
15 . 钢管混凝土结构技术规范[S].
16 AI. Seismic provisions for structural steel buildings[S].
17 . 金属材料拉伸试验 第1部分: 室温试验方法[S].
18 .建筑抗震试验规程[S].
19 施刚, 袁锋, 霍达, 等. 钢框架梁柱节点转角理论模型和测量计算方法[J]. 工程力学, 2012, 29(2): 52-59.
Shi Gang, Yuan Feng, Huo Da, et al. The theoretical model and measuring calculation method of the beam-to-column joint rotation in steel frames[J]. Engineering Mechanics, 2012, 29(2): 52-59.
[1] SUN Xu-jie，PAN Jing-long，ZHENG Wen-zhong . Anti-seismic behavior of composite GFRPconcrete small hollow block wall
 [J]. 吉林大学学报(工学版), 2008, 38(05): 1054-1059.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd