吉林大学学报(工学版) ›› 2001, Vol. ›› Issue (2): 17-21.
Previous Articles Next Articles
LIANG Ji-cai, FU Pei-fu, HUANG Liang-ju, LI Yi
CLC Number:
[1] 夏巨谌.闭式模锻[M].北京:机械工业出版社,1993. [2] 机械工业部北京机电研究所.冷精锻和闭塞锻造成套技术产业的开发[R].国家科委"九五"科技攻关课题可行性研究报告,1996,3. [3] 范鸣玉.最优化技术基础[M].北京:清华大学出版社,1982. |
[1] | YING Liang, DAI Ming-hua, HU Ping, FAN Zheng-shuai, SHEN Guo-zhe, SHI Dong-yong. Strength and hardness prediction based on cooling rate for hot forming high strength steel [J]. 吉林大学学报(工学版), 2014, 44(6): 1716-1722. |
[2] | MIAO Hong, ZUO Dun-wen, WANG Min, ZHANG Rui-hong, WANG Hong-feng. Effect of technological parameters on quality of Q460 high-strength-steel internal thread formed by cold extrusion [J]. 吉林大学学报(工学版), 2012, 42(01): 68-73. |
[3] | Du Zhong-ze,Wei Fa-ming,Fu Han-guang,Wu Lai-zhi,Wang Jing-tao . Microstructures and magnetic properties of 2J4 alloy deformed by ECAP [J]. 吉林大学学报(工学版), 2008, 38(02): 303-0308. |
[4] | Du Zhongze, Huang Junxia, Fu Hanguang, Wang Jingtao, Zhao Xicheng. Microstructure and mechanical property of 65Mn steel after severe plastic deformation [J]. 吉林大学学报(工学版), 2006, 36(02): 143-0147. |
[5] | LIU Huamin, HUANG Liangju, LIANG Jicai. Development of double-action hydraulic die-sets for flashless-die-forging [J]. 吉林大学学报(工学版), 2004, (4): 544-546. |
[6] | LIU Hua-min, LIANG Ji-cai, LI Yi . Formulating Perturbation Equation of Deformation about Closing Female Dies and Filling in Punch Die Forging of Cylinder Volume [J]. 吉林大学学报(工学版), 2001, (3): 20-25. |
[7] | KOU Shu-qing, YANG Shen-hua, HUANG Liang-ju, FU Pei-fu. Compatible Description of Tool Surfaces,FEM Mesh Generation and Contact Search for Simulating Complicated Massive Forming [J]. 吉林大学学报(工学版), 2001, (1): 19-24. |
[8] | LIANG Ji-cai, FU Pei-fu, LI Yi, ZHANG Xin . Study on Working Limits about Forming Axial Symmetry Spare Parts with Cross-Wedge Rolling Technique [J]. 吉林大学学报(工学版), 2000, (4): 17-20. |
[9] | KOU Shu-qing, YANG Shen-hua, DENG Chun-ping. Numerical simulation and experimental study on cold precision forging of bevel gear used car [J]. 吉林大学学报(工学版), 2003, (4): 59-62. |
|