吉林大学学报(工学版) ›› 2000, Vol. ›› Issue (4): 92-95.
FU Lian-yu1, WANG Xiao-jun2, Kajimbi J. Paul 2
CLC Number:
| [1] 蔡礼君等.切削工艺系统阻厄器的研究［J］.机械工程学报, 1987, 23(1) :63-71. [2] Liu C R. Autoπ削ic chatter suppression by tool geometry control［J］. J. of ASME, 1985, 107(2): 945-948 [3] 高国利,王仁得,王启义.车削颤振的稳定区搜索控制［J］. 东北大学学报, 1996, 17(4) :411-415. [4] Smith S, Tlusty J. Stabilizing chatter by automatic spindle speed regulation［J］. Annals of the CIRP, 1992, 41(1): 433-436 [5] Tarng Y S, Hseih Y W, Li T C. Automatic selection of spindle speed for suppression of regenerative chatter in turning［J］ Int J. Adv. Manuf. Technol., 1996: 433-436 [6] Tarng Y S, Li T C, Chen M C. On-line drilling chatter recognition and avoidance using an ART2-A neural network［J］ Int.J. Mach. Tools Manufact, 1994, 34(4) : 949-957. [7] 于骏一,吴博达.机械加工振动的诊断、识别与控制［M］. 北京:清华大学出版社, 1994. [8] 付连字,告京比·保尔,于骏一,等.在线自寻优控制机床主轴转速的研究［J］.振动工程学报, 1998, 11 (4) : 497-499. [9] Kajimbi J. Paul,付连字,于骏一自寻优调整主轴转速消除切削振动［J］. 农业机械学报, 1999, 30(2): 104-107. [10] 付连字,卡京比·保尔,王晓军.优控主轴转速系统极限切削深度［J］.吉林工业大学自然科学学报, 2000, 30 (1) :83-86. [11] 付连字.机床主轴转速在线寻优控制的研究［D］. 长春:吉林工业大学饥械科学与工程学院, 1999. |
| [1] | SUN Rong-jun, GU Shuan-cheng, JU Pei, GAO Ke. Optimal design of new arc angle PDC drill bit for coal mining based on finite element method [J]. 吉林大学学报(工学版), 2017, 47(6): 1991-1998. |
| [2] | LIU Yu, LI Peng-fei, ZHANG Yi-min. Analysis and prediction of micro milling deformation of copper thin-wall parts [J]. 吉林大学学报(工学版), 2017, 47(3): 844-849. |
| [3] | XIA Chao-ying, DU Zhi-ming. Simulation analysis on energy optimization strategy for Toyota PRIUD hybrid electric vehicle [J]. 吉林大学学报(工学版), 2017, 47(2): 373-383. |
| [4] | TIAN Yan-tao, WANG Xiao-yu, HU Lei-lei, LIAN Yu-feng, ZHAO Yun, YIN Cheng. Active collision avoidance algorithm in electric vehicle lateral lane change [J]. 吉林大学学报(工学版), 2016, 46(5): 1587-1594. |
| [5] | ZHANG Peng, LIU Xiao-song, DONG Bo, LIU Ke-ping, LI Yuan-chun. Adaptive supper-twisting control for spacecraft soft landing on asteroids [J]. 吉林大学学报(工学版), 2016, 46(5): 1609-1615. |
| [6] | XIA Chao-ying, DU Zhi-ming. Simulation analysis on real-time optimal control strategy for hybrid electric vehicle [J]. 吉林大学学报(工学版), 2016, 46(4): 1276-1286. |
| [7] | ZHANG Dong-hao, XIANG Chang-le, HAN Li-jin, ZHENG Hai-liang. Multi-objective optimization hierarchic control method for power-split hybrid electric vehicles [J]. 吉林大学学报(工学版), 2016, 46(2): 373-382. |
| [8] | LI Yuan-chun,WANG Meng,SHENG LI-hui,ZHAO Bo. Adaptive second order sliding mode control for hydraulic manipulator based on backstepping [J]. 吉林大学学报(工学版), 2015, 45(1): 193-201. |
| [9] |
LI Ai-juan,LI Shun-ming,ZHAO Wan-zhong,SHEN Huan,JIANG Xing-xing, QIU Xu-yun,WANG Hui-jun. Optimal control theory based trajectory generation method for intelligent vehicle [J]. 吉林大学学报(工学版), 2014, 44(5): 1276-1282. |
| [10] | DONG Bo,LIU Ke-ping,LI Yuan-chun. Decentralized reinforcement learning optimal control for time varying constrained reconfigurable modular robot [J]. 吉林大学学报(工学版), 2014, 44(5): 1375-1384. |
| [11] | SUN You-hong, LIU Da-jun, GAO Ke, XIE Xiao-bo, MA Yin-long, GAO Jun-hui. Development of coupling bionics impregnated diamond bit [J]. 吉林大学学报(工学版), 2013, 43(06): 1566-1573. |
| [12] | LI Ai-juan, LI Shun-ming, SHEN Huan, MIAO Xiao-dong. ACT-R based dynamic trajectory optimization method for intelligent vehicles [J]. 吉林大学学报(工学版), 2013, 43(05): 1184-1189. |
| [13] | ZHAO Hong-wei, GUO Wen-chao, ZHANG Lin, WANG Xiao-jun. Quasicontinuum simulation of nanometric cutting of single crystal copper [J]. 吉林大学学报(工学版), 2013, 43(02): 352-357. |
| [14] | ZHOU De-yi, WANG Zi-jia, ZHANG Dan-dan, WU Guan-jun, ZHOU Han-yu. The new device of stalk cutting within corn narvester [J]. 吉林大学学报(工学版), 2012, 42(增刊1): 113-116. |
| [15] | ZHOU Xiao-qin, ZHU Zhi-wei, LUO Dan, ZHAO Shao-xin, ZHAO Xiao-dong. Influence of linearly varying cutting depth on nanocutting of monocrystalline copper [J]. 吉林大学学报(工学版), 2012, 42(01): 109-115. |
|
||