吉林大学学报(工学版) ›› 2003, Vol. ›› Issue (4): 126-130.
GAO Lun1, WANG Dan2, WANG Li-jiang1
CLC Number:
| [1] BINNING G, QUATE C F, GERBER C. Atomic force microscopy［J］.Physical Review Letters, 1986, 56:928-930. [2] 刘向阳,王立江,高春甫,等. 光学材料无磨料低温抛光的试验研究［J］. 机械工程学报,2002,38(6):47-50. [3] WHITEHOUSE D J. Comparison between stylus and optical methods for measuring surface［J］.Annals of the CIRP, 1988, 37(2):56-58. [4] DRAGOSET R A,YOUNG R D,MIELCZAREK S R. Scinning tunneling microscopy applied to optical surfaces［J］.Optics Letters, 1986, 11(9):420-422. [5] 白春礼,田芳. 扫描力显微术［M］. 北京:科学出版社,2000. [6] 许茂桃. 超精密加工技术的发展及其对策［J］. 制造技术与机床,2001(1):7-9. [7] WANG Jiaji. In-line inspection technology for deep submicron IC process［J］.J. Solid Slale Technol,1998(6):10-12. [8] FAN M H. Crtical dimension control optimization methodology on shallow trench isolation substrate for sub-0.25(technology gale patterning)［J］.J. Vac. Sci.&Technol.(B),2001, 19(2):456-460. [9] 赵清亮,王景贺,李旦,等. 扫描探针显微镜的最新技术进展及应用［J］. 电子显微学报,2002,19(1):69-75. [10] TORU Fuji, MASATAKA Yamaguchi, MASATOSHI Suzuki. Scanning tunneling microscope with three-dimensional interferometer for surface roughness measurment［J］. Rev.Sci. Instrumen, 1995,66(3):362-368. |
| [1] | ZHUGE Jing-chang, WU Jun, ZHAN Xiang-lin, YU Zhi-jing. Precise ultrasonic ranging method based on self-adaptive wavelet de-noising [J]. 吉林大学学报(工学版), 2017, 47(4): 1301-1307. |
| [2] | WANG Feng-yan, HUANG Run-qiu, CHEN Jian-ping, ZHANG Yuan-yuan, WANG Ming-chang. Camera calibration based on computer vision and surveying adjustment fundamentals [J]. 吉林大学学报(工学版), 2017, 47(3): 944-951. |
| [3] | WANG Wei-hua, MU Jia-yi, FU Rong, FAN Yong-kai, WANG Wen-kai. Current decouple control of salient-pole permanent magnet synchronous motor for hybrid electric vehicle [J]. 吉林大学学报(工学版), 2017, 47(3): 693-700. |
| [4] | LIU Gang, JIN Li-qiang, CHEN Peng-fei. Vehicle traction control algorithm based on optimal slip ratio under complicated road conditions [J]. 吉林大学学报(工学版), 2016, 46(5): 1391-1398. |
| [5] | GAO Song, LIANG Ji-cai, CHEN Guang-yi, WEI Zhi-yong, TENG Fei. Rapid adjusting of fundamental units in process of flexible 3D stretch-bending [J]. 吉林大学学报(工学版), 2014, 44(6): 1723-1728. |
| [6] | LI Zhi-min, HOU Yong-hong, WANG Bao-liang, HOU Chun-ping, ZHOU Yuan. Parallax adjustment method for stereoscopic display on mobile phones based on optical-plate [J]. 吉林大学学报(工学版), 2013, 43(增刊1): 304-308. |
| [7] | FENG Ying-ben, CHEN Hui. Sensorless drive of surface-mounted PMSM for EPS based on high-frequency signal injection [J]. 吉林大学学报(工学版), 2011, 41(增刊2): 65-69. |
| [8] | OU Shi-Feng, ZHAO Xiao-Hui, GAO Ying. Blind source separation using an adaptive combination of two separation systems [J]. 吉林大学学报(工学版), 2010, 40(05): 1366-1370. |
| [9] | JIANG Xiang-tao，HU Zhi-gang，HE Jian-biao . Call chain analysis for low power compile optimization [J]. 吉林大学学报(工学版), 2009, 39(01): 143-147. |
| [10] | SUN Liang，WANG Jun，HAN Ping-chou . Electrospinned PCL nanofiber and its diameter measurement correction [J]. 吉林大学学报(工学版), 2008, 38(06): 1305-1309. |
| [11] | WANG Xi-gang, ZHAO Li-ping, ZHAO En-chang. Application of EVA in investement projects decision [J]. 吉林大学学报(工学版), 2003, (2): 80-85. |
| [12] | ZHAO Ji-yin, GAI Shuang, QI Zhi-cai, LI Xian-tao. Segmented linear temperature control system of oil flash-point measuring instrument [J]. 吉林大学学报(工学版), 2003, (2): 51-55. |
| [13] | HUANG Wei, GE Bao-shan, YANG Ru-bing . Investment Route and Restriction of Venturous Capital Suppliers in China [J]. 吉林大学学报(工学版), 2002, (2): 99-104. |
| [14] | WANG Xiao-li, ZHANG De-jun, ZHANG Shao-jie, YANG Yin-sheng . Study on Benefit Analysis and Calculation of Uncertain Anti-disaster Investment [J]. 吉林大学学报(工学版), 2002, (2): 22-27. |
| [15] | WANG Xiao-li, ZHANG Shao-jie, ZHANG De-jun, YANG Yin-sheng . Social Economic Model of Anti-disaster Investment and Soil Utilization Uncertainty [J]. 吉林大学学报(工学版), 2001, (4): 42-48. |
|
||