吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (01): 28-33.

Previous Articles     Next Articles

Motion generation for machining axisymmetric aspheric surface based on analysis method

ZHANG Lei1, HUANG Zhi-dong1,2, ZHAO Ji1   

  1. 1. College of Mechanical Science and Engineering, Jilin University, Changchun 130022, China;
    2. Department of Mechanical Engineering, Liaoning Institute of Science and Technology, Benxi 117004, China
  • Received:2012-02-19 Online:2013-01-01 Published:2013-01-01

PDF (PC)

294

Abstract: An innovative design method of the machine tool for manufacturing axisymmetric asphere was put forward. Based on the configuration charactersitic of axisymmetric asphere surface, the relationship of position and orientation between the tool and the workpiece was analyzed. The matrix of position and orientation of the tool relative to the workpiece was set up. The requcired motion units were proposed and the motion function scheme of the machine tool for manufacturing the axisymmetric asphere surface was generated. The design results were optimized and the structure configuration of the machine tool was obtained according to the expressions of motion structure.

Key words: machine tool, axisymmetric aspheric surface, motion generation, matrix of position and orientation

CLC Number: 

  • TG502.12
[1] 陈钦芳, 徐昌杰. 轴对称非球面透镜光轴共轴度的测量研究[J]. 应用光学,2008,29(6): 870-873. Chen Qin-fang, Xu Chang-jie. Coaxial measurement of axisymmetric aspheric lens[J]. Journal of Applied Optics,2008,29(6):870-873.

[2] 张广鹏, 黄玉美, 刘永超, 等. 机床运动功能方案的创成式设计方法[J]. 组合机床与自动化加工技术,1999,43(2):38-41. Zhang Guang-peng, Huang Yu-mei, Liu Yong-chao, et al. Generative design method on the movement function schemes of the machine tool[J]. Modular Machine Tool & Automatic Manufacturing Technique, 1999,43(2):38-41.

[3] 张广鹏, 黄玉美, 苏菊宁, 等. 基于解析方法的机床运动创成[J]. 西安理工大学学报,1998,14(3):242-246. Zhang Guang-peng, Huang Yu-mei, Su Ju-ning, et al. Machine tools motion generating based on analysis method[J]. Journal of Xi'an University of Technology,1998,14(3):242-246.

[4] 廖德岗, 熊晓红. 非圆等宽截型零件的车铣加工运动设计[J]. 制造技术与机床,2003 (10):40-41. Liao De-gang, Xiong Xiao-hong. Motion design for turning and milling of non-circular parts with equal section width[J]. Manufacturing Technology & Machine Tool, 2003(10):40-41.

[5] 廖德岗, 车晓毅, 蔡悦华. 异型柱面车铣组合加工机床运动功能创成研究[J]. 长沙电力学院学报:自然科学版, 2005,20(2):89-92. Liao De-gang, Che Xiao-yi, Cai Yue-hua. Research on the formation of movement for irregular cylinder NC turning and milling[J]. Journal of Changsha University of Electric Power (Natural Science Edition), 2005,20(2):89-92.

[6] Saeki M, Kuriyagawa T, Lee J S, et al. Machining of aspherical opto-device utilizing parallel grinding method//ASPE Annual, 2001:433-436.

[7] Chen W K, Kuriyagawa T, Huang H, et al. Machining of micro aspherical mould inserts[J]. Precision Engineering,2005, 29(3):315-323.

[8] Kuriyagawa T, Zahmaty M S S, Syoji K. A new grinding method for aspheric ceramic mirrors[J]. Journal of Materials Processing Technology, 1996, 62(4):387-392.

[9] Ye Jun-jun, Guo Jiang, Guo Yin-biao. Research on path planning and data processing system for high-precise aspheric measurement//Proc of SPIE, 2007, 6723:1-6.

[10] Xiao M, Jujo S, Takahashi S, et al. Nanometer profile measurement of large aspheric optical surface by scanning deflectometry with rotatable devices:uncertainty propagation analysis and experiments[J]. Precision Engineering,2012, 36(1):91-96.

[11] Chen F J, Yin S H, Huang H, et al. Profile error compensation in ultra-precision grinding of aspheric surfaces with on-machine measurement[J]. International Journal of Machine Tools and Manufacture, 2010, 50(5):480-486.

[12] 潘君骅. 光学非球面的设计、加工与检验[M]. 苏州: 苏州大学出版社,2004.

[13] 蔡自兴. 机器人学[M]. 北京: 清华大学出版社,2009.

[14] Chen F C. On the structural configuration synthesis and geometry of machining centres[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2001, 215(6):641-652.

[15] Tutunea-Fatan O Remus, Feng His-yung. Configuration analysis of five-axis machine tools using a generic kinematic model[J]. International Journal of Machine Tools and Manufacture, 2004, 44(9):1235-1243.
[1] ZHENG Yu-bin, YANG Bin, WANG Xiao-feng, SHEN Gui-xiang, ZHAO Xian-zhuo, QIN Meng-meng. Test time design of motorized spindle accelerated life test based on Weibull distribution [J]. 吉林大学学报(工学版), 2018, 48(3): 767-772.
[2] SHEN Gui-xiang, ZENG Wen-bin, ZHANG Ying-zhi, WU Mao-kun, ZHENG Yu-bin. Determination of average maintenance time of CNC machine tools under minimum failure rate [J]. 吉林大学学报(工学版), 2017, 47(5): 1519-1526.
[3] QU Xing-tian, ZHAO Yong-bing, LIU Hai-zhong, WANG Xin, YANG Xu, CHEN Hang-de. Modeling and experiment of spatial geometric errors of hybrid serial-parallel machine tool [J]. 吉林大学学报(工学版), 2017, 47(1): 137-144.
[4] ZHANG Ying-zhi, LIU Jin-tong, SHEN Gui-xiang, QI Xiao-yan, LONG Zhe. Reliability modeling of CNC machine tools system based on failure correlation analysis [J]. 吉林大学学报(工学版), 2017, 47(1): 169-173.
[5] MENG Shu, SHEN Gui-xiang, ZHANG Ying-zhi, LONG Zhe, ZENG Wen-bin. Replacement time of system components of NC machine tools based on time-correlation [J]. 吉林大学学报(工学版), 2016, 46(6): 1946-1952.
[6] LI Hong-zhou, YANG Zhao-jun, XU Bin-bin, WANG Yan-kun, JIA Yu-hui, HOU Chao. Design of testing period for reliability assessment of NC machine tools [J]. 吉林大学学报(工学版), 2016, 46(5): 1520-1527.
[7] WANG Jian-jian, FENG Ping-fa, ZHANG Jian-fu, WU Zhi-jun, ZHANG Guo-bin, YAN Pei-long. Modeling of centering accuracy of chuck and its maintaining characteristics and restoration method [J]. 吉林大学学报(工学版), 2016, 46(2): 487-493.
[8] YANG Zhao-jun, YANG Chuan-gui, CHEN Fei, HAO Qing-bo, ZHENG Zhi-tong, WANG Song. Parameter estimation of reliability model of machining center based on particle swarm optimization and support vector regression [J]. 吉林大学学报(工学版), 2015, 45(3): 829-836.
[9] WANG Xiao-yan,SHEN Gui-xiang,ZHANG Ying-zhi,
SUN Shu-guang,QI Xiao-yan,RONG Feng. Dependent coefficient model for complex system based on failure chains [J]. 吉林大学学报(工学版), 2015, 45(2): 442-447.
[10] ZHAO Guo-juan, ZHANG Lei, LU Lei, HAN Fei-fei, ZHAO Ji. Modeling and analysis of the volumetric errors of four-axis polishing platform [J]. 吉林大学学报(工学版), 2014, 44(6): 1676-1683.
[11] on improved EM algorithm. Reliability modeling of finite Weibull distribution based [J]. 吉林大学学报(工学版), 2014, 44(4): 1010-1015.
[12] YANG Zhao-jun, YANG Chuan-gui, CHEN Fei, WANG Dong-liang, MA Shuai, LIU Bo. Optimization of the electro-hydraulic servo loading based on least square and SVDUKF algorithms [J]. 吉林大学学报(工学版), 2014, 44(2): 392-397.
[13] CHEN Chuan-hai, YANG Zhao-jun, CHEN Fei, HAO Qing-bo, XU Bin-bin, KAN Ying-nan. Reliability modeling of machining center spindle based on Boosttrap-Bayes [J]. 吉林大学学报(工学版), 2014, 44(01): 95-100.
[14] SHEN Gui-xiang, MENG Shu, ZHANG Ying-zhi, QI Xiao-yan, LUAN Lan, SONG Qi. Application of average rank time method in reliability modeling for subsystems [J]. 吉林大学学报(工学版), 2014, 44(01): 101-105.
[15] CHEN Chuan-hai, YANG Zhao-jun, CHEN Fei, HAO Qin-bo, XU Bin-bin, KAN Ying-nan. Failure mode analysis of computer numerical control machine tools based on fuzzy-DEA [J]. 吉林大学学报(工学版), 2013, 43(06): 1523-1528.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd