吉林大学学报(工学版) ›› 2012, Vol. 42 ›› Issue (增刊1): 100-103.

Previous Articles     Next Articles

Analysis about failure correlation of CNC equipment base on DEMATEL

WANG Xiao-yan1,2, SHEN Gui-xiang1, ZHANG Ying-zhi1, ZHENG Shan1, NIU Xu-lei1, LIANG Dong3   

  1. 1. College of mechanical Science and Engineering, Jilin University, Changchun 130022, China;
    2. Department of Electronic Engineering, Shenyang Aerospace University, Shenyang 110136, China;
    3. College of Automotive Engineering, Jilin University, Changchun 130022, China
  • Received:2012-04-17 Online:2012-09-01 Published:2012-09-01

PDF (PC)

462

Abstract: On the basis of FMECA analyzing result about one type of CNC fault history data from production site, the paper calculated four kinds of correlation degree about correlative fault between subsystems by DEMATEL, analyzed correlation and all relationships of correlative fault and proposed a new method to calculate the dependent components failure rate.

Key words: machine tool, DEMATEL, CNC equipment, failure correlation, reliability analysis

CLC Number: 

  • TG659
[1] Sun Yong, Ma Lin, Mathew J, et al. An analytical model for interactive failures[J]. Reliability Engineering ＆System Safety, 2006, 91(5):495-504.

[2] Sun Yong, Ma Lin. Estimate of interactive coefficients[J]. CRC for Integrated Engineering Asset Management ,2009 IEEE:310-314.

[3] 王晓峰,申桂香,张英芝,等. 基于改进危害度和DEMATEL方法的abc轴进给系统的故障排序[J].吉林大学学报:工学版,2012,42(1):123-127. Wang Xiao-feng, Shen Gui-xiang, Zhang Ying-zhi, et al. Prioritizing failures of abc-zxis feeding systems based on improved criticality and DEMATEL method[J]. Journal of Jilin University (Engineering and Technology Edition),2012, 42(1):123-127.

[4] Wang Wen-dai. Reliability importance of components in a complex system[C]//Proceedings of Annual Reliability and Maintainability Symposium (RAMS),Los Angeles, USA, 2004.

[5] 王晓峰,申桂香,张英芝. 加工中心可靠性与维修性影响度仿真分析[J]. 吉林大学学报:工学版,2011,41(增刊1):160-163. Wang Xiao-feng, Shen Gui-xiang, Zhang Ying-zhi. Simulation of reliability and maintainability influence of machining center[J].Journal of Jilin University (Engineering and Technology Edition),2011,41(Sup.1):160-163.

[6] 杜雷,高建民,陈琨.基于故障相关性分析的可靠性配置[J]. 计算机集成制造系统,2011,17(9):1973-1980. Du Lei, Gao Jian-min, Chen Kun. Reliability deployment based on fault correlation analysis[J]. Computer Integrated Manufacturing System,2011,17(9):1973-1980.

[7] 周伟,王东锋,刘亚杰. 考虑相关失效的备件优化配置模型[J]. 系统工程与电子技术,2011,33(10):2339-2342. Zhou Wei, Wang Dong-feng, Liu Ya-jie. Allocation optimization model for spare parts concerned with dependent failure[J]. Systems Engineering and Electronics, 2011, 33(10):2339-2342.

[8] 李志刚. 基于DEMATEL的制造业企业动态平衡记分卡的应用研究[D]. 哈尔滨:哈尔滨理工大学,2009. Li Zhi-gang. Application research of the dynamic BSC based on DEMATEL about manufacturing enterprise[D]. Harbin:Harbin University of Science and Technology,2009.

[9] 李远飞. 决策分析和评价算法在线实现[D]. 长春:吉林大学, 2011. Li Yuan-fei. Decision analysis and evaluation algorithm online achieving[D]. Changchun: Jilin University, 2011.

[10] Wu W W, Lee Y T. Developing global managers' competencies using the fuzzy DEMATEL method[J]. Expert Systems with Applications, 2007, 32(2):499-507.
[1] ZHENG Yu-bin, YANG Bin, WANG Xiao-feng, SHEN Gui-xiang, ZHAO Xian-zhuo, QIN Meng-meng. Test time design of motorized spindle accelerated life test based on Weibull distribution [J]. 吉林大学学报(工学版), 2018, 48(3): 767-772.
[2] SHEN Gui-xiang, ZENG Wen-bin, ZHANG Ying-zhi, WU Mao-kun, ZHENG Yu-bin. Determination of average maintenance time of CNC machine tools under minimum failure rate [J]. 吉林大学学报(工学版), 2017, 47(5): 1519-1526.
[3] QU Xing-tian, ZHAO Yong-bing, LIU Hai-zhong, WANG Xin, YANG Xu, CHEN Hang-de. Modeling and experiment of spatial geometric errors of hybrid serial-parallel machine tool [J]. 吉林大学学报(工学版), 2017, 47(1): 137-144.
[4] ZHANG Ying-zhi, LIU Jin-tong, SHEN Gui-xiang, QI Xiao-yan, LONG Zhe. Reliability modeling of CNC machine tools system based on failure correlation analysis [J]. 吉林大学学报(工学版), 2017, 47(1): 169-173.
[5] MENG Guang-wei, FENG Xin-yu, ZHOU Li-ming, Li Feng. Structural reliability analysis based on dimension reduction algorithm [J]. 吉林大学学报(工学版), 2017, 47(1): 174-179.
[6] MENG Shu, SHEN Gui-xiang, ZHANG Ying-zhi, LONG Zhe, ZENG Wen-bin. Replacement time of system components of NC machine tools based on time-correlation [J]. 吉林大学学报(工学版), 2016, 46(6): 1946-1952.
[7] LI Hong-zhou, YANG Zhao-jun, XU Bin-bin, WANG Yan-kun, JIA Yu-hui, HOU Chao. Design of testing period for reliability assessment of NC machine tools [J]. 吉林大学学报(工学版), 2016, 46(5): 1520-1527.
[8] WANG Jian-jian, FENG Ping-fa, ZHANG Jian-fu, WU Zhi-jun, ZHANG Guo-bin, YAN Pei-long. Modeling of centering accuracy of chuck and its maintaining characteristics and restoration method [J]. 吉林大学学报(工学版), 2016, 46(2): 487-493.
[9] SI Wei, MA Biao, REN Jun-ping, WANG Hai-nian, GE-Sang Ze-ren. Analysis of asphalt pavement performance under freeze-thaw cycles using reliability method [J]. 吉林大学学报(工学版), 2016, 46(1): 126-132.
[10] LYU Feng, YANG Yin-sheng, TANG Jin. Integration method for customer requirement analysis in product planning [J]. 吉林大学学报(工学版), 2015, 45(4): 1213-1218.
[11] YANG Zhao-jun, YANG Chuan-gui, CHEN Fei, HAO Qing-bo, ZHENG Zhi-tong, WANG Song. Parameter estimation of reliability model of machining center based on particle swarm optimization and support vector regression [J]. 吉林大学学报(工学版), 2015, 45(3): 829-836.
[12] WANG Xiao-yan,SHEN Gui-xiang,ZHANG Ying-zhi,
SUN Shu-guang,QI Xiao-yan,RONG Feng. Dependent coefficient model for complex system based on failure chains [J]. 吉林大学学报(工学版), 2015, 45(2): 442-447.
[13] ZHAO Guo-juan, ZHANG Lei, LU Lei, HAN Fei-fei, ZHAO Ji. Modeling and analysis of the volumetric errors of four-axis polishing platform [J]. 吉林大学学报(工学版), 2014, 44(6): 1676-1683.
[14] on improved EM algorithm. Reliability modeling of finite Weibull distribution based [J]. 吉林大学学报(工学版), 2014, 44(4): 1010-1015.
[15] YANG Zhao-jun, YANG Chuan-gui, CHEN Fei, WANG Dong-liang, MA Shuai, LIU Bo. Optimization of the electro-hydraulic servo loading based on least square and SVDUKF algorithms [J]. 吉林大学学报(工学版), 2014, 44(2): 392-397.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd