吉林大学学报(工学版) ›› 2013, Vol. 43 ›› Issue (05): 1307-1313.doi: 10.7964/jdxbgxb201305026

• paper • Previous Articles     Next Articles

Algorithm of 6-DOF robot trajectory planning applied to special marking

QIU Ning-jia1, SUI Zhen2, LI Ming-zhe1, ZHENG Cheng-xiang3   

  1. 1. Dieless Forming Technology Center, Jilin University, Changchun 130022, China;
    2. College of Communication Engineering, Jilin University, Changchun 130022, China;
    3. Changchun Ruiguang Technology Co. Ltd., Changchun 130022, China
  • Received:2012-07-14 Online:2013-09-01 Published:2013-09-01

RICH HTML

0   

PDF (PC)

435

Abstract:

An algorithm of 6-DOF robot marking and trajectory planning is put forward, which is used for Multi-point Stretch Forming process of curved surface of sheet metal. First, the drawing area of the curve surface is determined according to the dimensional parameters of the stretch forming machine. Second, mapping software is used to analyze the data points within the parameter domain of the curved surface. Third, the boundary points are extracted through the coordinate relationships of the data points to determine the line drawing domain of the curved surface. Finally, the line drawing domain is projected onto a plane. Simulation results of line drawing operation are displayed by the use of manipulator inverse kinematic theory. Experiment proves that the algorithm can solve the problem of area selection of sheet metal, and provide an effective line drawing method for sheet metal forming.

Key words: materials synthesis and processing technology, multi-point stretch forming, 6-DOF robot, robot inverse kinematics analysis, spacial profile marking

CLC Number: 

  • TG302

[1] 周朝晖,蔡中义,李明哲.多点模具的拉形工艺和数值模拟[J].吉林大学学报:工学版,2005,35(3):287-291. Zhou Zhao-hui, Cai Zhong-yi, Li Ming-zhe. Stretching process based on multi-point die and Its numerical simulation[J]. Journal of Jilin University(Engineering and Technology Edition),2005,35(3): 287-291.

[2] Cai Zhong-yi, Wang Zhao-hui, Xu Xu-dong, et al. Numerical simulation for the multi-point stretch forming process of sheet metal[J].Journal of Materials Processing Technology, 2009,209: 396-407.

[3] Li M Z, Cai Z Y, Sui Z, et al. Multi-point forming technology for sheet metal[J].Journal of Materials Processing Technology, 2002, 129(1/2/3): 333-358.

[4] 方顾,李际军. 用于非均匀有理B样条曲面分区的扫描线算法[J]. 计算机集成制造系统,2007(10):2060-2063. Fang Gu, Li Ji-jun. Scan line algorithm for NURBS surface trimming[J]. Computer integrated Manufacturing Systems, 2007(10): 2060-2063.

[5] 杨联强.几何造型中曲面的分区、形状调整以及界的研究[D]. 厦门:厦门大学数学科学学院, 2009. Yang Lian-qiang. Research on trimming, shape-modifying and bounds of surfaces in geometric modeling[D]. Xiamen: Department of Methematics,Xiamen University,2009.

[6] 付荣,居鹤华. 高精度解耦六自由度机械臂逆运动学解法[J].计算机测量与控制,2008,18(7):1637-1640. Fu Rong, Ju He-hua. Real-time and high-accurate inverse kinematic control algorithm for decoupled six-DOF manipulator[J]. Computer Measurement &Control,2008,18(7): 1637-1640.

[7] 勾治践,孙影,徐连香,等. 六自由度点焊机器人运动学仿真[J]. 机械制造与自动化, 2009(2):155-156. Gou Zhi-jian, Sun Ying, Xu Lian-xiang, et al. Kinematics simulation of 6-DOF spot welding robot based on CATIA and ADAMS[J]. Machine Building and Automation, 2009(2): 155-156.

[8] Tam H Y, Law H W, Xu H Y. A gemometric approach to the offsetting of profiles on three-dimensional surfaces[J]. Computer Aided Design,2004, 36(7): 887-902.

[9] 周芳芳,樊晓平,叶榛.D-H参数表生成三维机器人模型仿真系统[J]. 系统仿真学报, 2006(4): 947-950. Zhou Fang-fang,Fan Xiao-ping,Ye Zhen.3-D virtual robotic model generated by D-H parameters[J]. Journal of System Simulation, 2006(4): 947-950.
[1] JIANG Qiu-yue,YANG Hai-feng,TAN Cai-wang. Strengthening properties of welded joints of 22MnB5 super high strength steel [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1806-1810.
[2] HU Zhi-qing, YAN Ting-xu, LI Hong-jie, LYU Zhen-hua, LIAO Wei, LIU Geng. Effect of cryogenic treatment on punch-shearing performance of aluminum alloy sheet [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1524-1530.
[3] QIU Xiao-ming, WANG Yin-xue, YAO Han-wei, FANG Xue-qing, XING Fei. Multi-objective optimization of resistance spot welding parameters for DP1180/DP590 using grey relational analysis based Taguchi [J]. 吉林大学学报(工学版), 2018, 48(4): 1147-1152.
[4] CHEN Jun-fu, GUAN Zhi-ping, YANG Chang-hai, NIU Xiao-ling, JIANG Zhen-tao, Song Yu-quan. Comparison of strain ranges and mechanical properties of metal rods under tension and torsion tests [J]. 吉林大学学报(工学版), 2018, 48(4): 1153-1160.
[5] LIANG Xiao-bo, CAI Zhong-yi, GAO Peng-fei. Numerical simulation and experiment of cylindrical forming of sandwich composite panel [J]. 吉林大学学报(工学版), 2018, 48(3): 828-834.
[6] LIU Zi-wu, LI Jian-feng. Erosion damage and evaluation of remanufacturing cladding layer for impeller metals FV520B [J]. 吉林大学学报(工学版), 2018, 48(3): 835-844.
[7] LIU Chun-guo, LIU Wei-dong, DENG Yu-shan. Effect of multi-point punch active loading path on the stretch-forming of sheet [J]. 吉林大学学报(工学版), 2018, 48(1): 221-228.
[8] LYU Meng-meng, GU Zheng-wei, XU Hong, LI Xin. Process optimization of hot stamping for anti-collision beam with ultra high strength [J]. 吉林大学学报(工学版), 2017, 47(6): 1834-1841.
[9] XING Hai-yan, GE Hua, LI Si-qi, YANG Wen-guang, SUN Xiao-jun. Hidden defect metal magnetic memory identification for welded joints based on fuzzy membership and maximum likelihood estimation [J]. 吉林大学学报(工学版), 2017, 47(6): 1854-1860.
[10] GU Xiao-yan, LIU Ya-jun, SUN Da-qian, XU Feng, MENG Ling-shan, GAO Shuai. Microstructures and mechanical properties of transient liquid phase diffusion bonded S355 steel/6005A aluminum alloy joint [J]. 吉林大学学报(工学版), 2017, 47(5): 1534-1541.
[11] GU Zheng-wei, ZHANG Wen-xue, LYU Meng-meng, WANG Wei, XU Hong, LI Xin. Stretch bending defect control of U-section stainless steel profile with wide flange [J]. 吉林大学学报(工学版), 2017, 47(4): 1165-1170.
[12] GU Zheng-wei, LYU Meng-meng, ZHANG Wen-xue, LEI Jiao-jiao, XU Hong. Stamping of front-end three-dimensional skin of China electric multiple units [J]. 吉林大学学报(工学版), 2017, 47(3): 869-875.
[13] YANG Xin-hui, XUE Wei, GUO Nan. Bending performance of glued-lumber beam reinforced with steel plate [J]. 吉林大学学报(工学版), 2017, 47(2): 468-477.
[14] LIANG Ji-cai, LI Yi, GAO Song, TENG Fei. Springback prediction for multi-point 3D stretch bending profile [J]. 吉林大学学报(工学版), 2017, 47(1): 185-190.
[15] XU Hong, LIU Ya-nan, YU Ting, GU Zheng-wei, LI Xiang-ji, ZHANG Zhi-qiang. Inelastic recovery behavior and microscopic mechanism of high strength DP780 steel during cyclic loading-unloading [J]. 吉林大学学报(工学版), 2017, 47(1): 191-198.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd