Journal of Jilin University(Engineering and Technology Edition) ›› 2021, Vol. 51 ›› Issue (2): 747-753.doi: 10.13229/j.cnki.jdxbgxb20191009

Previous Articles    

A calculation method for uncertainty of crosstalk in multi⁃conductor transmission line

Kai-yu YANG1(),Wei LIU1,Tian-hao WANG2(),Xian-li YU3,Yin-han GAO1,Xi-lai MA4   

  1. 1.College of Automotive Engineering，Jilin University，Changchun 130022，China
    2.College of Instrument Science and Electrical Engineering，Jilin University，Changchun 130026，China
    3.College of Geo-Exploration Science and Technology，Jilin University，Changchun 130026，China
    4.Commerical Vehicle Institute Electronics Department，FAW Jiefang，Changchun 130011，China
  • Received:2019-11-02 Online:2021-03-01 Published:2021-02-09
  • Contact: Tian-hao WANG E-mail:yangky@jlu.edu.cn;wangtianhao@jlu.edu.cn

RICH HTML

 4   

PDF (PC)

403

Abstract:

Aiming at the problem that the parameters such as the height， relative distance and termination impedance of the transmission line show uncertainty in the practice， a calculation method for the uncertainty of crosstalk in multi-conductor transmission line is proposed. Firstly， the multi-conductor transmission line model with uncertain parameters is established. Then， according to the multi-conductor transmission line theory， considering that the model has a safety threshold， the random response surface method based on the most likely failure point is used to calculate the failure probability of the multi-conductor transmission line model. By comparison， the failure probability of the model obtained by this method is basically consistent with the calculation result of Monte Carlo method， but its calculation efficiency is greatly improved， and the statistical moment of model crosstalk can be conveniently obtained， so as to realize efficient and accurate prediction of electromagnetic compatibility performance of transmission lines， such as wire harness or circuit board microstrip line in complex systems， such as automobiles.

Key words: multi-conductor transmission line, crosstalk, random response surface method, vehicle electronics, electromagnetic compatibility

CLC Number: 

  • TM930.11

Fig.1

Three-conductor transmission line unit length equivalent circuit"

Fig.2

Three-conductor transmission line actual circuit model"

Fig.3

Near-end crosstalk voltage of fixed parameter circuit model obtained by MTL equation calculation and CST software simulation respectively"

Fig.4

Near-end crosstalk voltage curves obtained by MCS"

Fig.5

Spatial transformation and geometric features of MPP"

Fig.6

MPP-SRSM calculation steps"

Table 1

Comparison of different reliability methods in frequency bands：103~104?Hz"

项目FORMMPP-SRSMMCS
P=(Vmax>10.5 mV)0.01020.00830.0084
计算步骤(函数调用次数)172172+20100000

Table 2

Comparison of different reliability methods in frequency bands：105~106?Hz"

项目FORMMPP-SRSMMCS
P=(Vmax>103 mV)0.00410.00360.0036
计算步骤(函数调用次数)6969+20100000

Fig.7

Local statistical moment calculated by MPP-SRSM: mean"

1 Antonini G, Orlandi A, Pignari S A. Review of clayton R. Paul studies on multiconductor transmission lines[J]. IEEE Transactions on Electromagnetic Compatibility, 2013, 55(4): 639-647.
2 Paul C R. Literal solutions for time-domain crosstalk on lossless transmission lines[J]. IEEE Transactions on Electromagnetic Compatibility, 1992, 34(4): 433-444.
3 Mora N, Rachidi F, Pelissou P, et al. Numerical simulation of the overall transfer impedance of shielded spacecraft harness cable assemblies[J]. IEEE Transactions on Electromagnetic Compatibility, 2015, 57(4): 894-902.
4 Lee J, Lee S, Nam S. A crosstalk reduction technique for microstrip MTL using mode velocity equalization[J]. IEEE Transactions on Electromagnetic Compatibility, 2011, 53(2): 366-371.
5 Kechicheb M, Clavel E, Mekideche M R. The MTL method and concept of shading to model automotive wiring having wide and multiple ground planes[C]∥International Conference on Electromagnetics in Advanced Applications,Torino, Italy, 2013:6-15.
6 Zhang J, Xu W, Gao C, et al. Analysis of inter-turn insulation of high voltage electrical machine by using multi-conductor transmission line model[J]. IEEE Transactions on Magnetics, 2013, 49(5): 1905-1908.
7 Huangfu Y P, Rienzo L D, Wang S H. Frequency-dependent multi-conductor transmission line model for shielded power cables considering geometrical dissymmetry[J]. IEEE Transactions on Magnetics, 2017, 54(3): 1-4.
8 Bellan D, Pignari S A, Spadacini G. Characterisation of crosstalk in terms of mean value and standard deviation (multiconductor transmission lines)[J].IEEE Proceedings-Science, Measurement and Technology, 2003, 150(6): 289-295.
9 Gordon C, Roselle K M. Estimating crosstalk in multiconductor transmission lines[J]. IEEE Transactions on Components Packaging & Manufacturing Technology Part B, 2002, 19(2): 273-277.
10 Larbi M, Besnier P, Pecqueux B. Probability of extreme interference levels computed from reliability approaches: Application to transmission lines with uncertain parameters[C]∥International Symposium on Electromagnetic Compatibility, Gothenburg, Sweden, 2014: 648-655.
11 Larbi M, Besnier P, Pecqueux B. Probability of EMC failure and sensitivity analysis with regard to uncertain variables by reliability methods[J]. IEEE Transactions on Electromagnetic Compatibility, 2015, 57(2): 274-282.
12 李永明, 杨娜, 郑亚利, 等. 汽车不均匀线束串扰特性预测的改进方法[J]. 重庆大学学报, 2012, 35(6): 48-52.
Li Yong-ming, Yang Na, Zheng Ya-li, et al.Prediction of crosstalk characterisation in cables bundles[J]. Journal of Chongqing University, 2012, 35(6):48-52.
13 王天皓, 王忠福, 王雨蒙, 等. 基于混沌多项式展开法的线束串扰统计模型[J]. 吉林大学学报: 工学版, 2017, 47(5): 1568-1576.
Wang Tian-hao, Wang Zhong-fu, Wang Yu-meng, et al. Statistic analysis of cable bundle crosstalk based on polynomial chaos expansion[J]. Journal of Jilin University (Engineering and Technology Edition), 2017, 47(5): 1568-1576.
14 高印寒, 樊宽刚, 杨开宇, 等. 时域有限差分法在汽车EMC分析中的应用[J]. 吉林大学学报: 工学版, 2009, 39(): 210-214.
Gao Yin-han, Fan Kuan-gang, Yang Kai-yu, et al. Application of finite-difference time-domain in analysis of EMC in automotive[J]. Journal of Jilin University (Engineering and Technology Edition), 2009, 39(Sup.1): 210-214.
15 Clayton R. Paul. 电磁兼容导论[M]. 闻映红, 译. 北京: 人民邮电出版社, 2007.
16 Rüdiger R, Flessler B. Structural reliability under combined random load sequences[J]. Computers & Structures, 1978, 9(5): 489-494.
17 Mckay M D, Beckman R J, Conover W J. A comparison of three methods for selecting values of input variables in the analysis of output from a computer code[J]. Technometrics, 1979, 21(2): 239-245.
[1] WANG Tian-hao, WANG Zhong-fu, WANG Yu-meng, YANG Kai-yu, GAO Yin-han, MA Xi-lai. Statistic analysis of cable bundle crosstalk based on polynomial chaos expansion [J]. 吉林大学学报(工学版), 2017, 47(5): 1568-1576.
[2] WANG Tian-hao, GAO Yin-han, Gao Le, AN Zhan-yang, MA Xi-lai, YANG Kai-yu. Time-domain transient response analysis of auto-harness-wire crosstalk based on Implicit Wendroff difference scheme [J]. 吉林大学学报(工学版), 2017, 47(2): 392-399.
[3] WANG Shi-gang, HUO Hao-da, WANG Bo, LYU Yuan-zhi, WU Wei, ZHANG Hang. Image crosstalk degrees detection method in auto-stereoscopic display system [J]. 吉林大学学报(工学版), 2015, 45(5): 1631-1635.
[4] GAO Yin-han, AN Zhan-yang, WANG Ju-xian, WANG Tian-hao, LIU Chang-ying, ZHANG Jun-dong. Application of equivalent cable bundle method in time domain radiation sensitivity of automotive cable harness [J]. 吉林大学学报(工学版), 2015, 45(3): 946-952.
[5] ZHOU Feng-dao,DONG Wei,BAO Zhi-qiang,XUE Kai-chang,HU Yue,SUN Cai-tang. Three-phase EMI filter based on switching power supply [J]. 吉林大学学报(工学版), 2015, 45(1): 216-221.
[6] GAO Yin-han,WANG Tian-hao,YANG Kai-yu,ZHANG Jun-dong,FAN Kuan-gang,ZHU Yu. Prediction of the dynamic crosstalk of automotive wiring hardness [J]. 吉林大学学报(工学版), 2014, 44(5): 1258-1263.
[7] TIAN Li-yuan,WANG Qing-nian,WANG Peng-yu. FlexRay network development of dual-motor hybrid power-train system [J]. 吉林大学学报(工学版), 2014, 44(3): 585-591.
[8] LI Qing-rong, XIA Jun. The asymmetric crosstalk of stereoscopic display [J]. 吉林大学学报(工学版), 2013, 43(增刊1): 326-329.
[9] LV Guo-jiao, WANG Qiong-hua. Time-multiplex auto-stereoscopic 3D display with low crosstalk and full resolution [J]. 吉林大学学报(工学版), 2013, 43(增刊1): 295-298.
[10] GAO Yin-han, WANG Rui-bao, MA Yu-gang, WANG Ying-ying, YANG Kai-yu. Analytical prediction of parasitic capacitance and crosstalk in automotive cable bundles [J]. 吉林大学学报(工学版), 2011, 41(增刊1): 144-149.
[11] AN Jing, WU Jun-feng, WU Yi-hui. Electromagnetic compatibility design of electronic control system for attitude control flywheel [J]. 吉林大学学报(工学版), 2011, 41(4): 998-1003.
[12] WU Ding-chao,GAO Yin-han,FAN Kuan-gang,WANG Ke. Electromagnetic radiation suppressed research of automotive mobile preparation system based on bluetooth technology [J]. 吉林大学学报(工学版), 2009, 39(06): 1554-158.
[13] Qin Zheng-kun, Ma Chun-sheng, Li De-lu, Zhang Hai-ming, Zhang Da-ming, Liu Shi-yong . Effect of waveguide bending on transmission characteristics of
arrayed waveguide grating multiplexers [J]. 吉林大学学报(工学版), 2007, 37(02): 448-0452.
[14] Gao Yin-han, Ma Xi-lai, Chen Ru-na. Electromagnetic compatibility prediction of automobile based on fuzzy inference [J]. 吉林大学学报(工学版), 2006, 36(03): 399-0403.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd