吉林大学学报(工学版) ›› 2014, Vol. 44 ›› Issue (5): 1258-1263.doi: 10.7964/jdxbgxb201405006

Previous Articles     Next Articles

Prediction of the dynamic crosstalk of automotive wiring hardness

GAO Yin-han1,WANG Tian-hao1,YANG Kai-yu1,ZHANG Jun-dong1,FAN Kuan-gang2,ZHU Yu3   

  1. 1.State Key Laboratory of Automotive Simulation and Control,Jilin University,Changchun 130022,China;
    2.College of Mechanical & Electrical Engineering,Jiangxi University of Science and Technology,Ganzhou 341000, China;
    3.College of Instrumentation& Electrical Engineering,Jilin University,Changchun 130061,China
  • Received:2013-12-24 Online:2014-09-01 Published:2014-09-01

RICH HTML

0   

PDF (PC)

672

Abstract: Different installation methods and different moving states of automobile can bring randomness to the relative position of wire in automobile wiring harness and ground height of wiring hardness. A statistic model is proposed to calculate the dynamic crosstalk of automobile wiring harness under the low frequency. The image method is employed to acquire the unit length distribution parameters of the wire with insulation layer, and the principle of statistics is applied to infer the mean value and variance of the dynamic crosstalk of wiring harness. The reasonable worst-case crosstalk value calculated by the proposed model is compared with the 273 times simulation results of random displacement spline interpolation to verify the accuracy and reliability of the model. The proposed statistic model can also adjust the relevant parameters flexibly according to practical situation and realize rapid prediction, which provide the basis to the design of vehicle electromagnetic compatibility. The model has very important practical significance.

Key words: vehicle engineering, automotive wiring harness, crosstalk, randomness, statistical model

CLC Number: 

  • TM930.11
[1] Salio S, Canavero F, Lecointe D, et al. Crosstalk prediction on wire bundles by Kriging approach[C]∥2000 IEEE International Symposium on Electromagnetic Compatibility,Washington DC,USA:IEEE,2000:197-202.
[2] Fatou D, Flavio C. Crosstalk statistics via collocation method[C]∥2009 IEEE International Symposium on Electromagnetic Compatibility , Austin, TX.United states: IEEE, 2009: 92-97.
[3] Salio S, Canavero F, Lefkbvre J, et al. Statistical description of signal propagation on random bundles of wires[C]∥1999 International Zurich Symposium on Electromagnetic Compatibility, Zurich , Switzerland, 1999:499-504.
[4] Meilin W, Daryl G B, Todd H H, et al. Statistical prediction of “reasonable worst-case” crosstalk in cable bundles[J]. IEEE Transactions on Electromagnetic Compatibility, 2009,51(3):842-851.
[5] Shishuang S, Geping L, Drewniak J L, et al. Hand-assembled cable bundle modeling for crosstalk and common-mode radiation prediction[J]. IEEE Transactions on Electromagnetic Compatibility, 2007:708-718.
[6] 高印寒,王瑞宝,李碧若,等.汽车线束电感性串扰动态变化的预测[J].光学精密工程,2011,19(5):1088-1094.Gao Yin-han,Wang Rui-bao,Li Bi-ruo,et al.Prediction of variation of inductive crosstalk in automotive cable bundles[J]. Optics and Precision Engineering,2011,19(5):1088-1094.
[7] 王瑞宝. 汽车线束分布参数和串扰预测研究[D].长春:吉林大学仪器科学与电气工程学院,2011.Wang Rui-bao. Reserch on prediction for parasitic parameters and crosstalk in automotive wiring harness[D]. Changchun: College of Instrument Science and Electrical Engineering, Jilin University, 2011.
[8] Bellan D, Pignari S A. Estimation of crosstalk in nonuniform cable bundles[C]∥IEEE International Symposium on Electromagnetic Compatibility.USA: IEEE, 2005: 336-341.
[9] Xiang L,Meilin W, Daryl G B, et al. Rapid simulation of the statistical variation of crosstalk in cable harness bundles[C]∥2010 IEEE International Symposium on Electromagnetic Compatibility.USA: IEEE ,2010:614-619.
[10] Paul C R. Introduction to Electromagnetic Compatibility[M].2nd ed. USA: Wiley Online Library,2005:402-421.
[11] Fei D, Guihao B, Donglin S. Crosstalk prediction in nonuniform cable bundles based on neural betwork[C]∥2010 International Symposium on Antennas Propagation and EM Theory .Guangzhou, China: ISAPE, 2010:1043-1046.
[1] CHANG Cheng,SONG Chuan-xue,ZHANG Ya-ge,SHAO Yu-long,ZHOU Fang. Minimizing inverter capacity of doubly-fed machine driving electric vehicles [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1629-1635.
[2] XI Li-he,ZHANG Xin,SUN Chuan-yang,WANG Ze-xing,JIANG Tao. Adaptive energy management strategy for extended range electric vehicle [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1636-1644.
[3] HE Ren,YANG Liu,HU Dong-hai. Design and analysis of refrigeration system supplied by solar auxiliary power of refrigerator car [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1645-1652.
[4] NA Jing-xin,MU Wen-long,FAN Yi-sa,TAN Wei,YANG Jia-zhou. Effect of hygrothermal aging on steel-aluminum adhesive joints for automotive applications [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1653-1660.
[5] LIU Yu-mei,LIU Li,CAO Xiao-ning,XIONG Ming-ye,ZHUANG Jiao-jiao. Construction on collision avoidance model of bogie dynamic simulation test bench [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(6): 1661-1668.
[6] ZHAO Wei-qiang, GAO Ke, WANG Wen-bin. Prevention of instability control of commercial vehicle based on electric-hydraulic coupling steering system [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1305-1312.
[7] SONG Da-feng, WU Xi-tao, ZENG Xiao-hua, YANG Nan-nan, LI Wen-yuan. Life cycle cost analysis of mild hybrid heavy truck based on theoretical fuel consumption model [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1313-1323.
[8] ZHU Jian-feng, ZHANG Jun-yuan, CHEN Xiao-kai, HONG Guang-hui, SONG Zheng-chao, CAO Jie. Design modification for automotive body structure based on seat pull safety performance [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1324-1330.
[9] NA Jing-xin, PU Lei-xin, FAN Yi-sa, SHEN Chuan-liang. Effect of temperature and humidity on the failure strength of Sikaflex-265 aluminum adhesive joints [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1331-1338.
[10] WANG Yan, GAO Qing, WANG Guo-hua, ZHANG Tian-shi, YUAN Meng. Simulation of mixed inner air-flow integrated thermal management with temperature uniformity of Li-ion battery [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1339-1348.
[11] JIN Li-sheng, XIE Xian-yi, GAO Lin-lin, GUO Bai-cang. Distributed electric vehicle stability control based on quadratic programming [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1349-1359.
[12] KUI Hai-lin, BAO Cui-zhu, LI Hong-xue, LI Ming-da. Idling time prediction method based on least square support vector machine [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1360-1365.
[13] WANG De-jun, WEI Wei-li, BAO Ya-xin. Actuator fault diagnosis of ESC system considering crosswind interference [J]. Journal of Jilin University(Engineering and Technology Edition), 2018, 48(5): 1548-1555.
[14] HU Man-jiang, LUO Yu-gong, CHEN Long, LI Ke-qiang. Vehicle mass estimation based on longitudinal frequency response characteristics [J]. 吉林大学学报(工学版), 2018, 48(4): 977-983.
[15] LIU Guo-zheng, SHI Wen-ku, Chen Zhi-yong. Finite element analysis of transmission error for hypoid gears considering installation error [J]. 吉林大学学报(工学版), 2018, 48(4): 984-989.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] LIU Song-shan, WANG Qing-nian, WANG Wei-hua, LIN Xin. Influence of inertial mass on damping and amplitude-frequency characteristic of regenerative suspension[J]. 吉林大学学报(工学版), 2013, 43(03): 557 -563 .
[2] CHU Liang, WANG Yan-bo, QI Fu-wei, ZHANG Yong-sheng. Control method of inlet valves for brake pressure fine regulation[J]. 吉林大学学报(工学版), 2013, 43(03): 564 -570 .
[3] LI Jing, WANG Zi-han, YU Chun-xian, HAN Zuo-yue, SUN Bo-hua. Design of control system to follow vehicle state with HIL test beach[J]. 吉林大学学报(工学版), 2013, 43(03): 577 -583 .
[4] HU Xing-jun, LI Teng-fei, WANG Jing-yu, YANG Bo, GUO Peng, LIAO Lei. Numerical simulation of the influence of rear-end panels on the wake flow field of a heavy-duty truck[J]. 吉林大学学报(工学版), 2013, 43(03): 595 -601 .
[5] WANG Tong-jian, CHEN Jin-shi, ZHAO Feng, ZHAO Qing-bo, LIU Xin-hui, YUAN Hua-shan. Mechanical-hydraulic co-simulation and experiment of full hydraulic steering systems[J]. 吉林大学学报(工学版), 2013, 43(03): 607 -612 .
[6] ZHANG Chun-qin, JIANG Gui-yan, WU Zheng-yan. Factors influencing motor vehicle travel departure time choice behavior[J]. 吉林大学学报(工学版), 2013, 43(03): 626 -632 .
[7] MA Wan-jing, XIE Han-zhou. Integrated control of main-signal and pre-signal on approach of intersection with double stop line[J]. 吉林大学学报(工学版), 2013, 43(03): 633 -639 .
[8] YU De-xin, TONG Qian, YANG Zhao-sheng, GAO Peng. Forecast model of emergency traffic evacuation time under major disaster[J]. 吉林大学学报(工学版), 2013, 43(03): 654 -658 .
[9] XIAO Yun, LEI Jun-qing, ZHANG Kun, LI Zhong-san. Fatigue stiffness degradation of prestressed concrete beam under multilevel amplitude cycle loading[J]. 吉林大学学报(工学版), 2013, 43(03): 665 -670 .
[10] XIAO Rui, DENG Zong-cai, LAN Ming-zhang, SHEN Chen-liang. Experiment research on proportions of reactive powder concrete without silica fume[J]. 吉林大学学报(工学版), 2013, 43(03): 671 -676 .
Copyright © Journal of Jilin University(Engineering and Technology Edition), All Rights Reserved.
Tel: +86-431-85095297　Fax: +86-431-85094074　E-mail: xbgxb@jlu.edu.cn
Powered by Beijing Magtech Co. Ltd