Journal of Jilin University(Engineering and Technology Edition) ›› 2023, Vol. 53 ›› Issue (6): 1842-1852.doi: 10.13229/j.cnki.jdxbgxb.20221430
Lin-feng WANG1,2(),Wan-chun XIA1,2,Lang XU1,2,Xiao-ming HUANG3,Guo-jin TAN4,Ji-xu ZHANG1,2
CLC Number:
1 | 连传杰, 徐卫亚, 王亚杰, 等. 新型高强预应力让压锚杆巷道支护性能的数值模拟[J]. 岩土力学, 2010(7): 2329-2335. |
Lian Chuan-jie, Xu Wei-ya, Wang Ya-jie, et al. Numerical simulation of entry performance supported by a new high-strength and high-pretension yieldable bolts[J]. Geotechnical Mechanics, 2010(7): 2329-2335. | |
2 | 许明, 唐亚锋, 刘先珊, 等. 自适应锚索锚固岩质边坡地震动力响应分析[J]. 岩土力学, 2018, 39(7): 2379-2386. |
Xu Ming, Tang Ya-feng, Liu Xian-shan, et al. Seismic dynamic response analysis of rock slope anchored by adaptive anchor cable[J]. Geotechnical Mechanics, 2018, 39(7): 2379-2386. | |
3 | 董建华, 秦兆贤, 何鹏飞. 形状记忆合金式锚杆的提出及抗拔承载力学特性分析[J]. 土木工程学报, 2023, 56(4): 103-118. |
Dong Jian-hua, Qin Zhao-xian, He Peng-fei. Proposal of shape memory alloy anchor rod and analysis of its uplift bearing mechanical properties[J]. Journal of Civil Engineering, 2023, 56(4): 103-118. | |
4 | 董建华, 郭瀚, 何鹏飞, 等. 气囊式框架地梁边坡支护结构力学性能分析[J/OL]. [2023-03-17]. |
5 | 何满潮, 郭志飚. 恒阻大变形锚杆力学特性及其工程应用[J]. 岩石力学与工程学报, 2014, 33(7): 1297-1308. |
He Man-chao, Guo Zhi-biao. Mechanical characteristics and engineering application of constant resistance large deformation anchor [J]. Journal of Rock Mechanics and Engineering, 2014, 33(7): 1297-1308. | |
6 | 涂兵雄, 刘士雨, 俞缙,等. 新型拉压复合型锚杆锚固性能研究:Ⅰ简化理论[J]. 岩土工程学报, 2018, 40(12): 2289-2295. |
Tu Bing-xiong, Liu Shi-yu, Yu Jin, et al. Study on anchorage performance of new tension compression composite anchor: Ⅰ implified theory[J]. Journal of Geotechnical Engineering, 2018, 40 (12): 2289-2295. | |
7 | 唐春安, 赵兴东, 王维纲,等. 新型全长多点楔胀式管缝锚杆(竹节式锚杆)的试验研究[J]. 岩石力学与工程学报, 2004, 23(3): 465-468. |
Tang Chun-an, Zhao Xing-dong, Wang Wei-gang, et al. Experimental study on a new full-length multi-point wedge expansion pipe joint anchor (bamboo joint anchor)[J]. Journal of Rock Mechanics and Engineering, 2004, 23(3): 465-468. | |
8 | Liang Y, He M, Cao C, et al. A mechanical model for conebolts[J]. Computers & Geotechnics, 2017, 83: 142-151. |
9 | Tao Z G, Zhao Fei, Wang Hong-jian, et al. Innovative constant resistance large deformation bolt for rock support in high stressed rock mass[J]. Arabian Journal of Geosciences, 2017, 10(15): No. 341. |
10 | 郑达, 梁力丹, 巨能攀. 低周往复荷载作用下预应力锚索震害特征研究[J]. 岩石力学与工程学报, 2015, 34(7): 1353-1360. |
Zheng Da, Liang Li-dan, Ju Neng-pan. Study on seismic damage characteristics of prestressed anchor cable under low cycle reciprocating load[J]. Journal of Rock Mechanics and Engineering, 2015, 34(7): 1353-1360. | |
11 | 李伟, 宋海生, 陆浩宇, 等.复合材料板簧迟滞特性线性辨识方法[J]. 吉林大学学报: 工学版, 2022, 52(4): 829-836. |
Li Wei, Song Hai-sheng, Lu Hao-yu, et al. Linear identification method for hysteresis characteristics of composite plate springs[J]. Journal of Jilin University (Engineering and Technology Edition), 2022, 52(4): 829-836. | |
12 | 于繁华, 刘仁云, 张义民, 等. 机械零部件动态可靠性稳健优化设计的群智能算法[J]. 吉林大学学报: 工学版, 2017, 47(6): 1903-1908. |
Yu Fan-hua, Liu Ren-yun, Zhang Yi-min, et al. A swarm intelligence algorithm for robust optimization design of dynamic reliability of mechanical components[J]. Journal of Jilin University (Engineering and Technolog Edition), 2017,47(6): 1903-1908. | |
13 | Wu W J, Zhu L M, Yu X, et al. Novel method for equivalent stiffness and coulomb's damping ratio analyses of leaf spring[J]. Journal of Mechanical Science & Technology, 2012, 26(11): 3533-3538. |
14 | Khatkar V, Behera B K, Manjunath R N. Textile structural composites for automotive leaf spring application[J]. Composites, Part B—Engineering, 2020, 182: No.107662. |
15 | Zhao K, He Y H, Liu X L, et al. Multiaxial fatigue life and damage characteristics of 50CrVA spring steel under tension-bending-torsion proportional loading[J]. Journal of Materials Engineering, 2014(12): 99-103. |
16 | Shi G, Zhao H, Zhang S, et al. Microstructural characteristics and impact fracture behaviors of low-carbon vanadium-microalloyed steel with different nitrogen contents[J]. Materials Science and Engineering, 2020, 769: No.138501. |
17 | Li X, Liu Y. Improvement in microstructure and wear-resistance of high chromium cast iron/medium carbon steel bimetal with high vanadium[J]. Materials Research Express, 2021, 8(4): No.046512. |
18 | Dolzhenko A, Kaibyshev R, Belyakov A. Outstanding impact toughness of low-alloyed steel with fine lamellar microstructure[J]. Materials Letters, 2021, 303(5879): No.130547. |
19 | 李杰, 张喆, 朱毅杰,等. 平衡悬架钢板弹簧模型的建立与仿真[J]. 重庆大学学报, 2011, 34(6): 31-35. |
Li Jie, Zhang Zhe, Zhu Yi-jie, et al. Establishment and simulation of leaf spring model for balanced suspension[J]. Journal of Chongqing University, 2011, 34(6): 31-35. | |
20 | 董建华, 朱彦鹏, 马巍. 框架预应力锚杆边坡支护结构动力计算方法研究[J]. 工程力学, 2013, 30(5): 250-258. |
Dong Jian-hua, Zhu Yan-peng, Ma Wei. Research on dynamic Calculation method of frame prestressed bolt slope support structure[J]. Engineering Mechanics, 2013, 30(5): 250-258. |
[1] | Zhen-yong DI,Xin-hui YANG,Xiao LIN. Seismic performance analysis of building double beam column joints based on load displacement hysteretic curve [J]. Journal of Jilin University(Engineering and Technology Edition), 2023, 53(7): 2061-2066. |
[2] | Zhen-liang LIU,Cun-bao ZHAO,Yun-peng WU,Mi-na MA,Long-shuang MA. Life⁃cycle seismic resilience assessment of highway bridge networks using data⁃driven method [J]. Journal of Jilin University(Engineering and Technology Edition), 2023, 53(6): 1695-1701. |
[3] | Qing-feng YAN,Ji-gang ZHANG,Tao WANG,De-gang CHEN,You-sheng YU,Ying-chun YANG. Seismic performance of connection joints between prefabricated prefinished volumetric construction [J]. Journal of Jilin University(Engineering and Technology Edition), 2023, 53(2): 505-514. |
[4] | Yong-zhi GONG,Jin-hua KUANG,Fu-long KE,Quan ZHOU,Xiao-yong LUO. Experiment on seismic behavior of assembled shear wall joints connected by ultra high performance concrete [J]. Journal of Jilin University(Engineering and Technology Edition), 2022, 52(10): 2367-2375. |
[5] | Guang-tai ZHANG,Lu-yang ZHANG,Guo-hua XING,Yin-long CAO,Bao YI. Seismic performance of steel⁃polypropylene hybrid fiber reinforced concrete shear wall [J]. Journal of Jilin University(Engineering and Technology Edition), 2021, 51(3): 946-955. |
[6] | SU Ying-she, YANG Yuan-yuan. Seismic compression performance of the concrete under high temperature [J]. 吉林大学学报(工学版), 2015, 45(5): 1436-1442. |
[7] | GAO Xin, WU Xiao-wei, TIAN Jun. Structure of nonlinear finite element model of lightweight aggregate concrete share wall and the factors affecting seismic performance [J]. 吉林大学学报(工学版), 2015, 45(5): 1428-1435. |
[8] | LI Li-ming,CHEN Yi-yi,LI Ning,CAI Yu-chun. Seismic performance of outer-shell connection of cold-formed square tubular column and H-shaped steel beam [J]. 吉林大学学报(工学版), 2010, 40(01): 67-0071. |
[9] | LI Li-ming1,2, LI Ning3, CHEN Zhi-hua4, JIANG Xin-liang4 . Anti-seismic test on concretefilled square steel tube column [J]. 吉林大学学报(工学版), 2008, 38(04): 817-822. |
|