J4

• • 上一篇    下一篇

Al2O3-SiC纳米复合陶瓷的制备及其表征

王丽丽1,2, 郑伟涛1, 李海波3, 丁涛1, 田宏伟1, 于陕升1, 马楠1   

  1. 1. 吉林大学 材料科学与工程学院, 长春 130012; 2. 长春大学 理学院, 长春 130022;3. 吉林师范大学 物理学院, 吉林省 四平 136000
  • 收稿日期:2005-03-18 修回日期:1900-01-01 出版日期:2006-01-26 发布日期:2006-01-26
  • 通讯作者: 郑伟涛

Preparation and Characterization of Al2O3-SiC Ceramic Nanocomposites

WANG Li-li1,2, ZHENG Wei-tao1, LI Hai-bo3, DING Tao1, TIAN Hong-wei1, YU Shan-sheng1, MA Nan1   

  1. 1. College of Materials Science and Engineering, Jilin University, Changchun 130012, China; 2. College of Science, Changchun University, Changchun 130022, China; 3. College of Physics, Jilin Normal University, Siping 136000, Jilin Province, China
  • Received:2005-03-18 Revised:1900-01-01 Online:2006-01-26 Published:2006-01-26
  • Contact: ZHENG Wei-tao

摘要: 以分析纯Al(NO3)3·9H2O, (CH2)6N4和粒径为30 nm的SiC粉末为原料, 采用溶胶-凝胶(sol-gel)方法制备干凝胶, 经煅烧合成Al2O3-SiC纳米陶瓷粉, 利用真空热压装置对粉末进行烧结. 通过X射线衍射(XRD)、 扫描电镜(SEM)和维氏硬度实验分析了不同SiC含量和不同烧结温度的Al2O3-SiC陶瓷样品的结构、 形貌、 晶粒尺寸和硬度, 并研究了其机理.

关键词: 溶胶-凝胶方法, Al2O3-SiC纳米复合陶瓷, 烧结

Abstract: A dry gel was prepared from Al(NO3)3·9H2O, (CH2)6N4 and SiC powder with a particle size of 30 nm via the sol-gel processing. Al2O3-SiC ceramic nanocomposites were obtained from the dry gel by means of vacuum heat-pressing technique. X-ray diffraction, scan electron microscopy and hardness experiment were used to analyze the structure, morphology, grain size and hardness of the Al2O3-SiC nanosized ceramic composites with different contents of SiC particles sintered at different temperatures.

Key words: sol-gel processing, Al2O3-SiC ceramic nanocomposites, sinter

中图分类号: 

  • TB333