[1] Randolph LD, Palin WM, Leloup G, et al. Filler characteristics of modern dental resin composites and their influence on physico-mechanical properties[J].Dent Mater, 2016, 32(12):1586-1599. [2] 杨安, 胥春, 张富强. 牙科纤维桩树脂基体材料的应用现状与研究进展[J]. 口腔材料器械杂志, 2015, 24(1):43-46. [3] Habib E, Wang R, Wang Y, et al. Inorganic Fillers for Dental Resin Composites:Present and Future[J]. Acs Biomater Sci Engineer, 2016, 2(1):1-11. [4] Xu HH, Quinn JB, Giuseppetti AA, et al. Effects of whisker-to-silica ratio on the reinforcement of dental resin composites with silica-fused whiskers[J]. J Dent Res, 2000, 79(11):1844-1849. [5] Xu HH, Quinn JB, Smith DT, et al. Effects of different whiskers on the reinforcement of dental resin composites[J]. Dent Mater, 2003, 19(5):359-367. [6] 袁慎坡,林红,徐永祥. 国内口腔修复用复合树脂无机填料的研究进展[J]. 现代口腔医学杂志, 2012, 26(2):130-132. [7] Kumar SR, Patnaik A, Bhat IK. Wear behavior of light-cured dental composite reinforced with silane-treated nanosilica filler[J]. Polymers Adv Technol, 2018, 29(5):1394-1403. [8] Anyszka R, Bielinski DM, Pedzich Z, et al. Effect of mineral filler additives on flammability, processing and use of silicone-based ceramifiable composites[J]. Polymer Bull, 2018, 75(4):1731-1751. [9] D'Alpino PH, Svizero Nda R, Bim Júnior O, et al. Effects of age condition on the distribution and integrity of inorganic fillers in dental resin composites[J]. Clin Oral Investigat, 2016, 20(5):1011-1019. [10] Aydinoglu A, Yoruç ABH. Effects of silane-modified fillers on properties of dental composite resin[J]. Mater Sci Eng C Mater Biol Appl, 2017, 79:382-389. [11] Wang R, Habib E, Zhu XX. Evaluation of the filler packing structures in dental resin composites:From theory to practice[J]. Dental Mater, 2018, 34(7):1014-1023. [12] Lassila L, Keulemans F, Säilynoja E, et al. Mechanical properties and fracture behavior of flowable fiber reinforced composite restorations[J]. Dent Mater, 2018, 34(4):598-606. [13] 李维燕, 孙健. 牙科树脂渗透氧化锆陶瓷材料的制备与性能研究[J]. 口腔材料器械杂志, 2017, 26(4):173-177. [14] 罗毅, 蒋俊强, 但洪平. 填料协同增强增韧光固化树脂基口腔材料的制备、性能及生物力学评价[J]. 中国组织工程研究, 2017, 21(10):1489-1494. [15] 王爽, 王青山, 刘光艳. 纳米羟基磷灰石填料含量对复合树脂双键转化率的影响[J]. 牙体牙髓牙周病学杂志, 2017,27(9):513-515, 520. [16] 张颖丽, 李保泉, 孙宏晨, 等. 熔附条件对牙科复合树脂中SP1SiO2表面结构及形态的影响[J]. 实用口腔医学杂志, 2007, 23(4):540-542. [17] Xu HH, Quinn JB. Effect of silicon carbide whisker-silica heat treatment on the reinforcement of dental resin composites[J]. J Biomed Mater Res, 2001, 58(1):81-87. [18] Xu HH. Whisker-reinforced heat-cured dental resin composites:effects of filler level and heat-cure temperature and time[J]. J Dent Res, 2000, 79(6):1392-1397. [19] Ronald JK, Randall SH, Nicholas JP. The role of the fibermatrix interface in ceramic composites[J]. Am Ceram Soc Bull, 1989, 68(2):429. [20] Johnson WW, Dhuru VB, Brantley WA. Composite microfiller content and its effect on fracture toughness and diametral tensile strength[J]. Dent Mater, 1993, 9(2):95-98. [21] Htang A, Ohsawa M, Matsumoto H. Fatigue resistance of composite restorations:effect of filler content[J]. Dent Mater, 1995, 11(1):7-13. [22] Xu HH, Smith DT, Schumacher GE, et al. Indentation modulus and hardness of whisker-reinforced heat-cured dental resin composites[J]. Dent Mater, 2000, 16(4):248-254. |